Keyword
Categories






Industries













Brands






215 Results
Page: 2   3  
OptiStruct V14.0.230 Feature Presentations Demo Models
OptiStruct V14.0.230 Feature Presentations Demo... The zip file contains feature presentations and demo models for the 27 OptiStruct features released in V14.0.230 View More
OptiStruct V14.0.220 Feature Presentations Demo Models
OptiStruct V14.0.220 Feature Presentations Demo... The zip file contains feature presentations and demo models for all the 21 OptiStruct features released in V14.0.220 View More
OptiStruct V14.0.210 Feature Presentations and Demo Models
OptiStruct V14.0.210 Feature Presentations and ... The zip file contains feature presentations and demo models for all the 35 OptiStruct features released in V14.0.210 View More
OptiStruct V14.0 Feature Presentations Demo Models
OptiStruct V14.0 Feature Presentations Demo Mod... For each of the 70 new features in OptiStruct 14.0, there is an individual presentation and demo model. View More
Using Analytical Approach with Finite Element Analysis for Coupling Magnetic and Thermal Analysis for Motors
Using Analytical Approach with Finite Element A... Thermal analysis is a key factor when designing motors. We propose to link the studies of electromagnetic and the... View More
Study the Influence of Air-gap Variation on Axial Forces in Axial Flux Permanent Magnet Motor Using 3D-FEM
Study the Influence of Air-gap Variation on Axi... This paper describes the effect of air-gap variation on performance of a 28 pole axial flux permanent magnet motor... View More
Numerical Modeling and Experimental Analysis of the Magnetic Noise of the Single-Phase Inverter-Fed Permanent Split-Capacitor Motor_Andrei NEGOITA_OPTIM
Numerical Modeling and Experimental Analysis of... Abstract- The paper presents a FEM approach for studying the influence of the capacitor value on the magnetic nois... View More
Analyze Design and Control Aspects of Linear Machines Using Co-simulation
Analyze Design and Control Aspects of Linear Ma... This research work describes the permanent magnet linear machines, their characteristics, control and applications... View More
Low Frequency EMC Analysis of Power Systems and Equipments
Low Frequency EMC Analysis of Power Systems and... Presentation slides by Enrico Vialardi View More
3D Calculation and Modeling of Eddy Current Losses in a Large Power Transformer
3D Calculation and Modeling of Eddy Current Los... Elimination of hot spots and reduction of eddy current losses in structural parts is one of the important constitu... View More
Influence of Discrete Inductance Curves on the Simulation of Round Rotor Generator Using Coupled Circuit Method
Influence of Discrete Inductance Curves on the ... This paper presents a study on the influence of the discretisation of the inductance curves on a detailed coupled... View More
Investigation of Electromagnetic and Thermal Behavior During Fast Dynamics in a PMSM Flux 2D/3D and Motor-CAD Simulation
Investigation of Electromagnetic and Thermal Be... 2013 Flux Conference Presentation View More
Hall Effect Magnetic Sensors Design for Automotive Application
Hall Effect Magnetic Sensors Design for Automot... Samir GUERBAOUI – R&D Engineering View More
Transverse Flux Induction Heating of Magnetic Non Linear Sheets
Transverse Flux Induction Heating of Magnetic N... FLUX Conference 2013 Presentation View More
Design Optimization of Traction Motors for EV Applications
Design Optimization of Traction Motors for EV A... Increasing concerns on energy security and environmental pollution by fossil fuel engines have pushed significant ... View More
EMC Modeling of an Industrial Variable Speed Drive With an Adapted PEEC Method
EMC Modeling of an Industrial Variable Speed Dr... This paper presents an adapted partial element equivalent circuit (PEEC)-based methodology applied to the modeling... View More
A New High Efficiency Technology For The Induction
A New High Efficiency Technology For The Induct... In recent years, an innovative DC induction heating concept has been proposed in order to increase the efficiency... View More
Temperature Prediction And Thermal Management For Composite Magnetic Controllers Of Induction Coils
Temperature Prediction And Thermal Management F... ABSTRACT. Temperature control of magnetic controllers (concentrators, cores, shields, shunts) is an essential par... View More
A 3D Numerical Fem Model For The Simulation Of Induction Welding Of Tubes
A 3D Numerical Fem Model For The Simulation Of ... In the present paper, two simulation strategies for tube induction welding process are presented. Coupled electro... View More
High Efficiency Motor Design for Electric Vehicles
High Efficiency Motor Design for Electric Vehic... Flux Conference 2012 presentation View More
Analysis of Hybrid Motor and Drive for Automotive Application
Analysis of Hybrid Motor and Drive for Automoti... Flux Conference 2012 Presentation View More
Verification of Fault Condition Behaviour of a Synchronous 2-Pole Generator Using Flux 2D Finite Element Analysis Software
Verification of Fault Condition Behaviour of a ... Flux Conference 2012 presentation View More
Design of Permanent Magnet Axial Flux High Power  Wind Turbines Generators (MW range)
Design of Permanent Magnet Axial Flux High Powe... Flux Conference 2012 Presentation View More
Flux API in Induction Heating Applications
Flux API in Induction Heating Applications 2014 FLux Conference Presentation View More
Enhancing Surface-breaking Flaw Detection by Induction Thermography Using Flux
Enhancing Surface-breaking Flaw Detection by In... 2014 Flux Conference Presentation View More
Reluctance Synchronous Motor Optimization
Reluctance Synchronous Motor Optimization 2014 Flux Conference Presentation View More
Design and Simulation of an Axial Gap Electromagnetic Brake with Flux 3D FEA Package
Design and Simulation of an Axial Gap Electroma... 2014 Flux Conference Presentation View More
FEM Simulation Tool for Electromagnetic NDT System in Different Inspection Situation and Visualization Platform
FEM Simulation Tool for Electromagnetic NDT Sys... Dr. Yasmine GABI Dr. Bernd Wolter Dr. Olivier Martins Andreas Gerbershagen View More
Actuator Design
Actuator Design For a fine design and analysis of any actuator (voice coil, electromagnet, protection relay…), Flux package featur... View More
Heat Treatment Simulation
Heat Treatment Simulation As a leader in induction heating simulation for more than 20 years, Flux has developed numerous formulations and t... View More
Analytical Model of Permeance Variation Losses in Permanent Magnets of the Multipole Synchronous Machine
Analytical Model of Permeance Variation Losses ... Permeance variation in the air gap of the permanent-magnet synchronous machine induces eddy-current losses in its ... View More
Using Flux and InCa3D for an Induction Heating Device: Evolutions Since 2010 Flux Conference
Using Flux and InCa3D for an Induction Heating ... Presented at the 2013 Flux Conference View More
Electromagnetic Study of a Transformer
Electromagnetic Study of a Transformer Presented at the 2015 Flux Conference View More
Electromagnetic and Mechanical Analysis of a Linear Actuator for House Appliance
Electromagnetic and Mechanical Analysis of a Li... Presented at the 2015 Flux Conference View More
Boosting HyperWorks Further with Electromagnetic Simulation
Boosting HyperWorks Further with Electromagneti... An overview of FEKO's capabilities, key applications, industries and features. View More
Introduction to KTex Family Presentation
Introduction to KTex Family Presentation Presentation that accompanies KTex Family Introductory Webinar. View More
Composite Plate Optimization with Practical Design Constraints
Composite Plate Optimization with Practical Des... Composite free size optimization has the potential to generate weight savings and performance improvements for man... View More
Altair Leveraging Disruptive Cloud Technologies
Altair Leveraging Disruptive Cloud Technologies As decreasing hardware prices and attractive business models are democratizing high-performance computing (HPC) re... View More
Design Methodologies for ALM and Lattice parts
Design Methodologies for ALM and Lattice parts Design for additively made parts has become a very hot topic. Many engineers see the potential for topology optimi... View More
Advance Electromangnetic Simulations and their Applications in Oil & Gas Industry
Advance Electromangnetic Simulations and their ... Advances in computational electromagnetic tools have made electromagnetic (EM) simulations possible for various ap... View More
Advanced Design, Analysis and Optimization of Composite Structures
Advanced Design, Analysis and Optimization of C... With stricter requirements on performance and weight, in many cases, composite materials are now becoming the natu... View More
Multiphysics - A New Generation of Simulation
Multiphysics - A New Generation of Simulation The application of CAE early in a product’s design cycle can make an important difference in its cost and function... View More
How Advanced Simulation will Impact the Offshore Industry both Now and in the Future
How Advanced Simulation will Impact the Offshor... The easy days of Oil and gas extraction is over, and the ability to extract Oil and Gas from harsh enviornments is... View More
Challenges to Extending Design Verification and Optimization in Completion Tool Development
Challenges to Extending Design Verification and... The oil and gas industry has shifted dramatically in the past year. The forecast for the industry is extremely dif... View More
Automated Finite Element Model Creation using Structural Condition Data for Marine & Offshore Assets
Automated Finite Element Model Creation using S... Advanced structural integrity management software is capable of using a structural Computer Aided Design (CAD) geo... View More
FEA Based Design Optimization to Mitigate Anchor Cage Impact Damage Risk
FEA Based Design Optimization to Mitigate Ancho... The power of Finite Element Analysis (FEA) simulations can be effectively used for failure analysis and design opt... View More
Leveraging Geometric Shape Complexity, in Optimal Design for Additive Manufacturing
Leveraging Geometric Shape Complexity, in Optim... Additive manufacturing (AM) technology enables the possibility of realizing highly efficient, optimized structural... View More
nanoFluidX Overview Presentation
nanoFluidX Overview Presentation Introductory presentation offering information about the particle-based CFD software from FluiDyna. View More
Intro to the CADdoctor Midsurface Module
Intro to the CADdoctor Midsurface Module Introduction to the CADdoctor Midsurface function enhancement. View More
Intro to the CADdoctor Polygon Extension
Intro to the CADdoctor Polygon Extension Introduction to the Polygon Extension function enhancement for CADdoctor. View More
Intro to the CADdoctor Geometry Simplification Module
Intro to the CADdoctor Geometry Simplification ... Introduction to the Geometry Simplification function enhancement for CADdoctor. View More
Intro to the CADdoctor Verification Module
Intro to the CADdoctor Verification Module Introduction the the geometry verification function enhancement for CADdoctor. View More
Elysium Company Introduction
Elysium Company Introduction Introduction presentation and company profile for Elysium, developer of CADdoctor. View More
Intro to CADdoctor Presentation
Intro to CADdoctor Presentation Presentation introducing CADdoctor, software for 3D geometry healing, simplification and verification, as well as ... View More
Electromagnetic and Mechanical Analysis Using the Coupling between Flux and Vibro-acoustics
Electromagnetic and Mechanical Analysis Using t... The purpose of this presentation is to show the different steps of the vibro‐acoustic study of a rotating machines... View More
Intro Presentation to Virfac from GeonX
Intro Presentation to Virfac from GeonX Comprehensive slide deck that covers everything from the problems Virfac addresses to simulation setup and results. View More
Additive Manufacturing Design & Engineering Symposium 2014
Additive Manufacturing Design & Engineering Sym... Additive Manufacturing, AM Symposium, Euromold, Technology Symbiosis, Topology optimization, Additive Manufacturin... View More
Consideration of uncertainties in forming simulation using HyperWorks
Consideration of uncertainties in forming simul... This was a 2013 European ATC presentation given by Markus Reinert from DTE Werkzeugtechnik GmbH & Co. KG. In the ... View More
Prediction of warpage in welded assemblies
Prediction of warpage in welded assemblies This was a 2013 European ATC presentation given by Dr. Amin Sedighiamri from SABIC. Long glass fiber reinforced po... View More
Sequentially Cold Forming Simulation of Complex Shaped Heavy Plates
Sequentially Cold Forming Simulation of Complex... This was a 2013 European ATC presentation given by Dipl.-Ing. Steffen Garke from Universität Rostock. Swept lines... View More
Process Simulation of Tube Stamping on HyperWorks Platform
Process Simulation of Tube Stamping on HyperWor... This was a 2013 European ATC presentation given by Metin ÇALLI from Coskunöz Metal Form . The main targets of auto... View More
Fatigue Due to Random Loadings
Fatigue Due to Random Loadings This was a 2013 European ATC presentation given by Frédéric Kihm from HBM United Kingdom Limited. Fatigue damage ... View More
Sensitivity Evaluation of Welding Seams in Durability Analysis with FEMFAT
Sensitivity Evaluation of Welding Seams in Dura... This was a 2013 European ATC presentation given by Axel Werkhausen from Manager FEMFAT Support. Modelling of weldi... View More
DSHplus and AcuSolve - Fluid Power System Simulation Hand in Hand
DSHplus and AcuSolve - Fluid Power System Simul... This was a 2013 European ATC presentation given by Dr. Heiko Baum from FLUIDON Gesellschaft für Fluidtechnik mbH. ... View More
Fan Optimization in Automotive Industry
Fan Optimization in Automotive Industry This was a 2013 European ATC presentation given by Dr Macoumba N’DIAYE from Fluorem. SC/TETRA is an all-in-one ge... View More
Vibration Behaviour of External Payload on Rotorcraft
Vibration Behaviour of External Payload on Roto... This was a 2013 European ATC presentation given by David Schmid from RUAG Schweiz AG. The RUAG developed ISSYS Pod... View More
Detection & Analysis of Barely Visible Impact Damage & its Progression on a Composite Overwrapped Pressure Vessel
Detection & Analysis of Barely Visible Impact D... This was a 2013 European ATC presentation given by Valentina Dolci from Thales Alenia Space/Politecnico di Torino.... View More
Study on structural behavior of an atmospheric re-entry vehicle during ditching
Study on structural behavior of an atmospheric ... This was a 2013 European ATC presentation given by Dr. Maurizio Coltro from Altran Italia SPA. Water impact pheno... View More
Airframe Engineering Process at CASSIDIAN
Airframe Engineering Process at CASSIDIAN This was a 2013 European ATC presentation given by Gunnar Clemen from CASSIDIAN. Airframe engineering is supporte... View More
Unlock 55+ Partner Applications with Your HyperWorks Units
Unlock 55+ Partner Applications with Your Hyper... This was a 2013 European ATC presentation given by Stephanie Scapa from Altair.Traditional licensing schemes do no... View More
NovaFlow&Solid CV - Improved casting quality and strength using casting process simulation efficiently
NovaFlow&Solid CV - Improved casting quality an... This was a 2013 European ATC presentation given by Hakan Fransson from NovaCast Systems AB. NovaFlow&Solid CV can ... View More
Improved Strength Prediction of Injection Molded Fiber Reinforced Components by Considering Fiber Orientations
Improved Strength Prediction of Injection Molde... This was a 2013 European ATC presentation given by Sascha Pazour from PART Engineering. For fiber reinforced parts... View More
Coupled thermal, structural, and CFD simulation using RadTherm and HyperWorks
Coupled thermal, structural, and CFD simulation... This was a 2013 European ATC presentation given by Antti Jussila from Thermoanalytics. Many automotive application... View More
Development of a New Altair Customized Database of Advanced Material Properties
Development of a New Altair Customized Database... This was a 2013 European ATC presentation given by Viktor Pocajt from Key to Metals AG. Key to Metals is a vast d... View More
Damage and Failure Mechanism Study of Composite/hybrid Crush Tubes during Axial Crush through Progressive Failure Dynamic Analysis
Damage and Failure Mechanism Study of Composite... This was a 2013 European ATC presentation given by Dr. Angelo De Fenza from AlphaSTAR Corporation. Carbon fiber r... View More
CAE-driven design methodology for semi-autonomous product development for the next generation light weight vehicle structures
CAE-driven design methodology for semi-autonomo... This was a 2013 European ATC presentation given by various presenters from German Aerospace Center. Passenger cell... View More
Topology optimization of a prototype race car rear wing pillar
Topology optimization of a prototype race car r... This was a 2013 European ATC presentation given by Elias AMRO from ADESS AG. The design optimization of race car ... View More
 A design approach for lightweight car body construction with an example on the micro-car “ec2go”
A design approach for lightweight car body con... This was a 2013 European ATC presentation given by various presenters from Imperia GmbH Abstract. With increase in... View More
Strengths and Weaknesses of the Different Contact Formulations Available in Explicit Software
Strengths and Weaknesses of the Different Conta... This was a 2013 European ATC presentation given by Gérard Winkelmuller from Altair Development France. I will pres... View More
Numerical simulation of liquid sloshing and fluid-structure interaction (FSI) inside closed volumes
Numerical simulation of liquid sloshing and flu... This was a 2013 European ATC presentation given by Ralf Euser from Femto.The presentation will have two different ... View More
Experimental and Numerical Simulation of Laser Driven Shock Waves in Water
Experimental and Numerical Simulation of Laser ... This was a 2013 European ATC presentation given by Dr. Ekaterina Mazanchenko from ENSMA-PPRIME. In order to test t... View More
Rat brain injury mechanism identification through indentation experiment FE reconstruction
Rat brain injury mechanism identification throu... This was a 2013 European ATC presentation given by Dr. Daniel Baumgartner from University of Strasbourg. The rat h... View More
Digital Photonic Production - Optimization potentials by Laser based manufacturing
Digital Photonic Production - Optimization pote... This was a 2013 European ATC presentation given by Dipl.-Wirtsch.-Ing. Simon Jens Merkt from Fraunhofer-Institut f... View More
Structural Optimization and Laser Additive Manufacturing in lightweight design: barriers and chances
Structural Optimization and Laser Additive Manu... This was a 2013 European ATC presentation given by Dipl.-Ing. Jannis Kranz TUHH Technische Universität Hamburg-Har... View More
Multi-Scale FEM Simulation of Selective Laser Melting Process
Multi-Scale FEM Simulation of Selective Laser M... This was a 2013 European ATC presentation given by Nils Keller, Group Leader from ALMJ Universität Bremen and Prof... View More
Multibody Analysis of a Vending Machine
Multibody Analysis of a Vending Machine This was a 2013 European ATC presentation given by Dr. Marco Morone from Altran. It was performed a MB analysis o... View More
Alternative Model Order Reduction in Elastic Multibody Systems
Alternative Model Order Reduction in Elastic Mu... This was a 2013 European ATC presentation given by Dipl.-Ing. Philip Holzwarth from Institute of Engineering and C... View More
Optimized Design for Vehicle Underbody System
Optimized Design for Vehicle Underbody System This was a 2013 European ATC presentation given by Emanuele Santini from Autoneum Management AG. Underbody systems... View More
Optimization Center – Consistent Integration of Structural Optimization in the Development Process of Passenger Cars
Optimization Center – Consistent Integration of... This was a 2013 European ATC presentation given by Dr. Karsten Bohle, Dr. Bernhard Wiedemann, Dr. Boris Kuenkler, ... View More
Shape Optimization of Engine Moving Components with Hyper-Study Integration
Shape Optimization of Engine Moving Components ... This was a 2013 European ATC presentation given by Mr. SANGWOO CHA from Hyundai motors company. Computer aided op... View More
HyperCrash Dummy Positioning Using RADIOSS Fast and Accurate Innovative Features
HyperCrash Dummy Positioning Using RADIOSS Fast... This was a 2013 European ATC presentation given by Fabien Breda & Lionel Morançay from Altair. Dummy positioning n... View More
Stamping Process Integration of Composites in Crash Analysis
Stamping Process Integration of Composites in C... This was a 2013 European ATC presentation given by Cécile DEMAIN from Solvay Engineering Plastics. Thermoplastic c... View More
Humanetics Anthropomorphic Test Device News and Radioss Model Developments
Humanetics Anthropomorphic Test Device News and... This was a 2013 European ATC presentation given by Robert Kant from Humanetics Europe GmbH. Main stream finite ele... View More
Impact of a new regulation for Child Restraint Systems on the crash simulation
Impact of a new regulation for Child Restraint ... This was a 2013 European ATC presentation given by François Renaudin and Sylvaine Pormente from DOREL. Injuries to... View More
Multidisciplinary Optimisation of Business Jet MED Hinge for Production by Additive Manufacturing
Multidisciplinary Optimisation of Business Jet ... This was a 2013 European ATC presentation given by Martin Muir, Jonathan Meyer, and Alex Diskin from European Aero... View More
Topology Design of a Metallic Load Introduction Bracket Manufactured by ALM
Topology Design of a Metallic Load Introduction... This was a 2013 European ATC presentation given by Wolfgang Machunze from EADS Innovation Works. The usage of nume... View More
Sustainability approach by Design Optimization for Advanced Layer Manufacturing
Sustainability approach by Design Optimization ... This was a 2013 European ATC presentation given by Udo Behrendt from EOS GmbH - Electro Optical Systems. Sustainab... View More
Composite Modeling with FiberSim
Composite Modeling with FiberSim This was a 2012 Americas HTC Composites training presentation given by Shan Nageswaran. This presentation focuses ... View More
Crashworthiness Workshop
Crashworthiness Workshop This was a 2012 Americas HTC Crashworthiness training presentation. This presentation focuses on the use of HyperW... View More
View All
Page: 2   3  

Contact Us












* Required Fields
Global Map
We have offices located around the world.
Click here to find yours.