Altair ProductDesign Unveils the World’s First Series Hydraulic Hybrid Transit Bus
BUSolutions LCO-140H to revitalize urban transit by increasing fuel economy by 110 percent and reducing 12-year fleet operations cost by $50 million for the average sized transit authority
TROY, Mich. – Sept. 7, 2011 – Altair ProductDesign
, a global product development consultancy and wholly-owned subsidiary of Altair Engineering
, Inc., today unveiled the world’s first series hydraulic hybrid transit bus. The LCO-140H (Low-Cost of Ownership-1st 40-foot Hybrid) was developed under the BUSolutions
program in partnership with Automation Alley
, in an effort to revitalize public bus transportation in America.
Compared to the database of buses tested at Altoona
, where the Federal Transit Administration
(FTA) certification program is conducted, the LCO-140H fuel economy results are 110 percent better than conventional diesel buses and 30 percent better than the leading diesel-electric hybrid buses available today. The LCO-140 achieved an industry high fuel economy of 6.9 mpg when tested using the downtown “stop-and-go” duty cycles and test protocol established by the FTA for transit bus certification testing.
BUSolutions is projected to lower the cost of ownership by $170,000 per bus as compared to a conventional diesel bus. With the average local transit authority operating approximately 300 buses, the savings could reduce a city’s cost of transit bus operation by approximately $50 million. When compared to an estimated $27 million increase in operational costs for a similar electric hybrid fleet, it is clear the LCO-140H could revolutionize the transit industry by providing reduced fuel consumption and emissions while improving the fiscal performance of a regional transit authority.
BUSolutions has been a collaborative effort between public and private entities to research, develop and commercialize advanced transit bus systems that are significantly more fuel efficient, have lower operating and maintenance costs, are competitively priced and can operate without updating the infrastructure of existing transit authorities.
In addition to investments by Altair and Automation Alley, BUSolutions has been funded by multiple federal and state programs including the FTA and the Michigan Economic Development Corporation
(MEDC). It also has received exceptional local support by southeast Michigan congressional members, transportation industry partners, and local transit authorities SMART
and the Detroit Department of Transportation
“This project has been a collaborative effort from start to finish throughout the development, design and test phases. We would not have exceeded the goals we had set for ourselves had we not applied our knowledge and unique technologies to produce this revolutionary bus,” said Mike Heskitt, chief operating officer at Altair ProductDesign. “BUSolutions demonstrates Altair’s expertise and capabilities as a concept-to-release, full vehicle development partner.”
“We are thrilled to have partnered in the BUSolutions program that is putting Michigan at the forefront of solving emerging public transit technology issues through innovation and collaboration,” said Ken Rogers, executive director at Automation Alley. “Goals were set when this program started to produce a transit bus that was more fuel efficient, more affordable and more cost effective to operate for city transit authorities, and this project has both met and exceeded those goals.”
Additionally, BUSolutions strategically partnered with regional and global high-tech manufacturers that assisted in incorporating state-of-the-art components and technologies from the transportation sector. Program sponsors include Parker
, which contributed significant driveline systems and knowledge. Various levels of support have been provided by PRAN
, Sika Corporation
, Meritor Wabco
, Alcoa Wheel Products
, Carrier Corporation
, LADD Industries
, Shaw Development
, USSC Group
, Cummins Bridgeway
, Multicolor Specialties
and Williams Controls
Altair has worked closely with local transit authorities, SMART and DDOT, to ensure the newly designed bus platform will meet regulatory requirements and address the needs of bus drivers and riders. Altair also established the BUSolutions Advisory Board to offer insight into broader community needs, as well as perspective on actual ridership issues and public-interface ergonomics. As a result, Altair ProductDesign successfully engineered the bus to incorporate design principles that will enhance the rider experience.
The LCO-140H Bus will also be demonstrated at the American Public Transportation Association (APTA) Expo
in New Orleans Oct. 3-5 at booth #2281. For more information, visit the Altair events website
Launched in 2005, the Altair BUSolutions program was established to develop and commercialize an advanced bus platform that lowers the total cost of ownership and environmental impact of commercial buses without updating the infrastructure of existing transit authorities. Leveraging the company’s deep domain knowledge in vehicle systems and cutting-edge, simulation-driven design practices to develop the design, Altair successfully partnered with Automation Alley, Michigan’s largest technology business association, to secure federal funding to build working technology demonstrators for future commercialization. For more information, visit www.altairbusolutions.com
About Altair ProductDesign
Altair ProductDesign is a global, multi-disciplinary product development consultancy of more than 500 designers, engineers, scientists, and creative thinkers. As a wholly owned subsidiary of Altair Engineering, Inc. (www.altair.com
), this organization is best known for its leadership in combining its engineering expertise with computer aided engineering (CAE) technology to deliver innovation and automate processes. Altair ProductDesign firmly advocates a user-centered, team-based design approach, and utilizes proprietary simulation and optimization technologies (i.e., Altair HyperWorks
) to help clients bring innovative, profitable products to market faster. To learn more, please visit www.altairproductdesign.com