Resource Library

Switched Reluctance Motor (SRM) Multiphysics Simulation

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations

Flux & Flux Motor: A Preview from the Inside

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations

Analysis of Static Eccentricity Faults in Double Stator Single Rotor Axial Flux Surface-mounted Permanent Magnet Motors

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations

Design the Future e-Mobility

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations

Using Workflow Automation Tools for the Multi-physics Optimization of Traction Motors

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations

Slotless-Halbach Lightweight Electric Machines and Unconventional Multi Layer Winding

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations

Vehicle Modeling in MotionView and MotionSolve 

This presentation was given at the 2019 ATCx Multibody & System Simulation conference at the Altair Headquarters in Troy, MI.

ATC Presentations

Altair Inspire Motion - An Overview 

This presentation was given at the 2019 ATCx Multibody & System Simulation conference at the Altair Headquarters in Troy, MI.

ATC Presentations

System Optimization with Altair MotionSolve 

This presentation was given at the 2019 ATCx Multibody & System Simulation conference at the Altair Headquarters in Troy, MI.

ATC Presentations

The Altair Motion Solution

This presentation was given at the 2019 ATCx Multibody & System Simulation conference at the Altair Headquarters in Troy, MI.

ATC Presentations

Major Antennas Constraints in Helicopters

Presentation by Hervé Dutruc, Antenna and Communication Expert at Airbus Helicopters.

This presentation will highlight challenges faced by Airbus Helicopters for the antenna installation definition, considering the increase of use of composite materials and the increase of frequency for c

ATC Presentations, Videos

EM Simulation for Wireless Systems and Antenna Integration on Motor Vehicles

Presentation by Dr. Ahmadreza Jafari, Radio Reception and Antenna Expert, & Phillippe Boutier, Référent RadioFréquence at Renault.

In this presentation, different examples of Renault RF simulations regarding antenna applications such as keyless entry and ignition, AM/FM/DAB radio, radar a

ATC Presentations, Videos

Simulation-Driven Development of Lightweight Brakes with Heavyweight Performance

Presentation by Martin Wollstad, Computational Engineer at Haldex Brake Products.

ATC Presentations, Videos

First-time-right Design of Matching Circuts for Complex Antenna dn RF Applications

Presentation by Jussi Rahola, CEO of Optenni.

The modern mobile phones and other wireless devices, matching circuits are commonly used to tune the antenna to operate at the desired frequencies and to broaden the operation frequency range of the antenna.

The goal of matching cir

ATC Presentations, Videos

Detailed Nonlinear Model for the Analysis of a Wind Turbine Pitch Bearing

Presentation by Aitor Fernandez, Mechanical Engineer at IK4-Tekniker.

The mechanical behavior and failure mechanisms of a wind turbine pitch bearing are very different from those of other bearings types designed for traditional applications. On the one hand, there is the effect of the low r

ATC Presentations, Videos

High Frequency Electromagnetic Simulation

In the session there are great presentations from high quality speakers from industry sectors including automotive, aviation, aerospace railway industry, as well research.
A wide variety of applications are covered, from antenna design and integration, to influences of radome structures on such sys

ATC Presentations, Videos

Multibody Modeling of Armored Car at Off-road Conditions using MotionView

Presentation by Dr. Vadim Favorsky, Senior R&D Engineer at Plasan Sasa.

In this presentation results of multibody modeling are compared to experimental results of a middleweight armored car. The car prototype which was built by Plasan Sasa, has a monocoque chassis construction to save wei

ATC Presentations, Videos

Airbus Global Migration to Altair HyperWorks for Modeling and Visualization

Presentation by Christophe Rigou, Linear & Non-Linear Solutions - ESCSAN at Airbus.

To support the next aircraft development and new derivative programs, AIRBUS Commercial Aircraft division has chosen HyperMesh and HyperView pre&post-processing software developed by Altair. The Patran t

ATC Presentations, Videos

Unveiling the Mysteries of the Early Universe with Modern Super Radio Telescopes

Presentation by Nicolas Fagnoni, Cavendish Laboratory, University of Cambridge.

The University of Cambridge and the Cavendish Laboratory are closely involved in the design and development of two new radio-telescopes: the ‘Square Kilometre Array’ (SKA) and the ‘Hydrogen Epoch of Reionizati

ATC Presentations, Videos

Assessment of the Electromagnetic Transparency of a Multilayer Radome at High Frequency

Presentation by Gilles Vogt, Inteliance Technologies.

When adding a radome to any network antenna, the transparency of the radome is a major concern, especially when the networks is tightly designed. A very large radome (6m long) has been modeled in Altair Feko (full wave MLFMM) in the GH

ATC Presentations, Videos

Automatic Generation of Thousands of Linear Loadcase Combinations for Efficient OptiStruct Static Simulations and Post-treatment with HyperView

Presentation by Samuel Ducarouge, Mechanical Engineer at Air Liquide.

During Cryogenics Pipes mechanical analysis (Liquid Oxygen, Hydrogen or Helium transport) automatic generation of load case combinations has been needed in order to avoid error from "hand made" combinations, to gear up

ATC Presentations, Videos

Recent and Future Developments in Altair Feko & WinProp

Presentation by Dr. Ulrich Jakobus, Senior VP - Electromagnetic Solutions at Altair.

The presentation introduces the latest features implemented in Altair’s high frequency electromagnetic solvers Altair Feko & WinProp. Application of these features to propagation modelling, antenna design

ATC Presentations, Videos

Structural Optimization Based Vibro-acoustic Simulations of a Cableway Gondola

Presentation by Thomas Livebardon, PhD and R&D Project Manager at CT Ingénierie.

Cableways have been recently deployed in a large number of cities, as it offers many benefits such as low investment, low ecological footprint, ease of construction and high reliability. However, its integratio

ATC Presentations, Videos

Non-linear Simulation and Optimization

Mechanical Simulation Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Prediction of Magnetic Field Emitted by Train Motor Cables

Presentation by Vincent Ardon, EMC Engineer at ALSTON Tarbes.

Due to the environment, more and more compact with signaling systems functioning from a few dozen of Hz to GHz close to train motors or traction cases, the prediction of magnetic field emitted by motor cables could help train d

ATC Presentations, Videos

Project Invincible - Advanced Chest Protection

Presentation by James Helliwell, Design Engineer at McLaren Applied Technologies.

In this presentation McLaren Applied Technologies, the advanced technology, innovation, and design company will discuss the background, design process and results of a project to develop a highly bespoke pro

ATC Presentations, Videos

Simulation, 3D Printing, and Casting the Perfect Symbiosis for Large Aerospace Structures

Presentation by Mathieu Deloubes, Innovation Project Manager at SOGECLAIR.

Manufacturing capabilities are still restrained by the size of 3D printing machines, which makes today the technology unsuitable for larger components. Investment Casting and pattern 3D printing is an answer, with th

ATC Presentations, Videos

Designing Recurring AM Products for Ariane Launchers. Pushing Technology to Industrial Applications with New Design Tools and Processes

Presentation by Marta García-Cosío, CITD HO Engineering & Additive Manufacturing at CITD.

This presentation outlines a novel design approach that gives the opportunity of reducing the number of parts comparing with the traditional design while keeping the same functionality, achieving mas

ATC Presentations, Videos

Optimal AM Part Design Combines Advanced Design Tools and DfAM Thinking

Presentation by Marc Saunders, Director of Global Solutions Centres at Renishaw.

Most design for additive manufacturing (DfAM) is not really worthy of the name - 'adapt to AM' would be a better description. Parts are often designed for function rather than manufacturability, requiring a f

ATC Presentations, Videos

New Developments in Technology and Process for Design for Additive Manufacturing

The focus of these presentations address in particular, how to create economic applications by combining new manufacturing technologies and a simulation driven design process.

Leading industry representatives present successful applications of additive manufacturing in combination with ne

ATC Presentations, Videos

Increasing the Productivity of Tooling Applications with 3D Printing and Multiphysics Simulation

Presentation by Stefan de Groot, Head of Development and Engineering at PROTIQ.

Injection molding tools and high conductive copper inductors are two prominent examples where the symbiosis of Simulation driven Design and Additive Manufacturing provides dramatic potential to increase the pr

ATC Presentations, Videos

Simulation-based Design of a Traction Battery Cooling Plate

Presentation by Frank Cord Lohmann, Project Manager at Altair.

The steady shift from conventional (combustion) powertrains to hybrid or full electric powertrains goes hand in hand with a steady increase in traction battery size, power and capacity. While passive cooling (air cooling) migh

ATC Presentations, Videos

Design for the Future of e-Mobility

The global automotive industry is on the verge of disruption with electrification being one of the major trends. In this session we will discuss the challenges and opportunities engineers are facing in the design of the future e-Mobility, includin...

ATC Presentations, Videos

Optimization Driven Motor Design - Processes and Methodology

Presentation by Lars Fredriksson, Business VP - Simulation Driven Innovation at Altair.

This presentation offers insight how Altair has approached the challenge of improving the total design balance in E-motor development. The presented study has been executed with active support of Porsche AG.

ATC Presentations, Videos

Highly Optimized Passive Lubrication System for an EV Transmission

Presentation by Dr. Milos Stanic, nanoFluidX Product Manager at Altair.

Optimising the rotational losses of an EV transmission is essential to improve range. Whilst bearing and gear losses are well understood, the interaction between rotating components and transmission fluid rarely explo

ATC Presentations, Videos

The Role of EMC Simulation and Virtual Drive Testing in the Development of Electric and Hybrid Vehicles

Presentation by Jordi Soler, VP of Global Business Development, Electromagnetic Solutions at Altair.

Electrified, connected, autonomous and shared are four converging mobility megatrends having game-changing effects on the automotive and transportation market. These trends are like to dri

ATC Presentations, Videos

Model-Based Development with Altair - Introduction and E-Mobility Use Cases Systems Simulation

Presentation by Andy Dyer, Senior Tech Specialist at Altair.

In this presentation, we'll take a look at a few examples of e-Mobility systems models built with Altair Activate and Compose and integrated with other tools like Flux, for electromagnetic simulation for electrical machines (mot

ATC Presentations, Videos

Simulation-driven Design and Manufacturing

Design for Manufacturing seminar held during 2018 Global ATC in Paris, France on October 16, 2018.

ATC Presentations, Videos

The Digitalization Trends and Structural Design in Maritime Industry

Dr. Toshiro Arima, Corporate Officer, Director of Rule Development and ICT Division at ClassNK, keynote presentation at the 2018 Global ATC in Paris, France.

In this presentation, the current state of digitalization of maritime industry, structural rules and evaluation software used for hull st

ATC Presentations, Videos

Introduction to Manufacturing Simulation-Driven Design

Presentation by Martin Solina, Project Manager, and Ulrich Bruder, Vice President Global Partner Sales, at Altair.

ATC Presentations, Videos
320 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!