Resource Library

Engineering Analytics to Support Product Development Control

Presentation by Rocco Cappiello, IOT Business Developer at Altair.

Altair Engineering Analytics empowers Engineers and Executives to make better decisions faster by managing reporting and analytics on the main engineering processes in one openly architected and highly configurable tool to

ATC Presentations, Videos

Test Twins - Digital Twins for the Product Development Process

Presentation by Alvaro Everlet, VP Business Development at Altair.

Digital Twins of test equipment help align physical simulation (lab testing) and virtual simulation (CAE). While typical CAE models make assumptions about the physical simulation initial conditions and the operational envi

ATC Presentations, Videos

Digital Twin, Predictive Maintenance and In-service Simulation

The Digital Twin and IoT seminar features the key ideas behind the concept of the Digital Twin, predictive maintenance, and its practical relevance especially for product engineering and simulation.

Presentations recorded at the Global ATC in Paris, France on October 16, 2018.

ATC Presentations, Videos

Automated Reporting Director for Structure Analysis at OHB System AG

Presentation by Mariana Mendes Leal, Structural Engineer at OHB Systems AG.

Even as engineers, a considerable amount of our time is spent producing reports. These can be FE-Model Descriptions, Sine Response Analysis or papers detailing investigations carried out internally.

For

ATC Presentations, Videos

Lead Time Reduction in Modeling and Visualization Playlist

Seminar held during 2018 Global ATC in Paris, France on October 16, 2018.

ATC Presentations, Videos

CAD and FEA Validation with Model Verification Director

Presentation by David Ravi, Director SWAT Team at Altair.

ATC Presentations, Videos

Taking Morphing to the Next Level: How to Leverage the New HyperWorks 2019x Free and Shapes Morphing Technology

Presentation by Jose Maria Cueva De Leon, Senior Program Manager at Altair.

ATC Presentations, Videos

Building and Managing Complex Assemblies with Ease in HyperWorks 2019

Presentation by Joe Kovacs, Director - Model Assembly at Altair.

ATC Presentations, Videos

Learn the New Geometry Manipulation, Meshing and Mid-mesh Extraction in HyperWorks 2019 and 2019x

Presentation by Michael Dambach, Vice President, HyperWorks Program Management at Altair.

ATC Presentations

The World is Built on Engineering

Dr. Uwe Schramm and James Dagg, CTOs at Altair, keynote presentation at the 2018 Global ATC in Paris, France.

This presentation will illustrate the power of Altair’s simulation technology through several practical examples applied to some of the most common product development challenges in aut

ATC Presentations, Videos

Technology as Key Enabler for Product Innovation

Sam Mahalingam, CTO at Altair, keynote presentation at the 2018 Global ATC in Paris, France.

As a technologist I have been following the technology trends and have identified three trends that can immensely change the product innovation landscape and they are: High Performance Cloud Computing, IO

ATC Presentations, Videos

Fast and Efficient Modeling and Post-processing for Composites in HyperWorks 2019x

Presentation by Michele Macchioni, Director, ModVis Program and Development Management at Altair.

ATC Presentations, Videos

Lead Time Reduction for Multiphysics Analyses in SimLab 2019

Presentation by Karthikeyan Sankarraj, Team Leader – Loads/BC Tools at Altair.

ATC Presentations, Videos

Form Follows Function - thyssenkrupp AG - Reinventing the Elevator Concept

Christian Kehrer presents on behalf of thyssenkrupp Elevator AG.

2017, thyssenkrupp Elevator AG has presented the MULTI concept, the world’s first rope-free elevator. The drive is ensured by a linear electromagnetic motor. To enable an economically feasible operation, it is necessary that

ATC Presentations, Videos

Recent and Future Developments in Flux and FluxMotor

Presentation by Vincent Leconte, Senior Director of Global Business Development - EM Solution at Altair.

ATC Presentations, Videos

Application of Altair HyperWorks and APA Products in Design of Gas-Turbine Engines

Presentation by Sergey Kutuev, Lyulka Design Bureau.

The presentation will demonstrate case studies performed by Lyulka Desigh Bureau enterprise with the application of Altair HyperWorks software products, such as HyperMesh and HyperView. Strength and optimization analysis carried out with

ATC Presentations, Videos

Efficient Multidisciplinary Modeling of a Washing Machine Motor Duty Cycle

Presentation by Dr. Martin Ortega, Principal Design Engineer at Mabe.

This work presents a systematic process of the electromagnetic and thermal analysis of a washing machine single-phase capacitor-run induction motor during a full wash cycle. By utilizing an electromagnetic solver and a

ATC Presentations, Videos

Saving Lives with Simulations: CEDREM Collaborates with DuPont on Ballistic Protection Solutions

Presentation by Edouard Ferry, CEDREM.

This study is a first step to study human body behavior during ballistic impacts and find injury thresholds. It combines many HyperWorks specificities such as composite modelling, hyper elastic material law, high speed impacts, equations of state, bi

ATC Presentations, Videos

Altair Inspire Studio Technology Preview

Presentation by Francesco Di Giuseppe, Evolve Application Specialist at Altair.

Franceso Di Giuseppe discusses the future of solidThinking Evolve and Altair Inspire Studio.

ATC Presentations, Videos

Model Validation of a Seat Using Building Block Approach

Presentation by Sébastien Dépierre, Simulation Manager at Zodiac Seats France.

ATC Presentations, Videos

Developing the Electric Drivetrain of Tomorrow - How Numerical Tools can Support Cooling and Lubrication System Development

Presentation by Johannes Winklinger, Energy & Fluid Expert at Magna Powertrain.

We are right at the beginning of the new mobility era with deep impact on the architecture of cars. Hybridization and electrification are the dominating topics in the automobile industry and consequently the power

ATC Presentations, Videos

Fast and Reliable Software Interfaces to Speed up the Design of Electric Motors

Presentation by Luigi Rizzi, Technical Director at SPIN Applicazioni Magnetiche.

The car industry is undergoing an unprecedented shift, between electrification, car sharing and autonomous drive. Car makers are going to roll out several zero-emission models in the next few years and their

ATC Presentations, Videos

Crash Simulation at Group PSA : Main Stakes and Perspectives

Presentation by Laurent Di Valentin, CAE Master Expert at PSA Group.

The constant improvements of the CAE process (from subsystem levels to the full car itself) and the development of optimization tools to reduce the mass and increase the performances led us to use the simulation as one v

ATC Presentations, Videos

Numerical Simulation of Distortions Induced During the SLM Process with Radioss 

Presentation by Laurent Van Belle, R&D Project Manager at IPC.

In order to analyse and control the dimensional quality created by SLM processes, an explicit numerical method has been developed by Altair to predict internal stresses and distortions. This numerical tool allows to study the

ATC Presentations, Videos

Electromagnetic Design and Multiphysics Simulation for the Creation of Innovative Products

This technical session focuses on design in electrical engineering, and especially on low frequency electromagnetic simulation. Presentations can be viewed of the latest advances in the Altair simulation solutions - Flux and FluxMotor. Several com...

ATC Presentations, Videos

How to Feed Simulation Models with SmartWorks

Presentation by Oliver Breuer, Head of Software Engineering at FLUIDON.

There is a life for simulation models beyond the development process. Despite the large amount of data that can be collected from industrial facilities, the real benefit is behind colorful graphics and charts. To get

ATC Presentations, Videos

Impact Simulation, Safety Analysis and Occupant Protection Strategies in CAE

Crash & Safety Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Multiscale Designer, A Multiscale Material Model Development Framework within HyperWorks

Presentation by Markku Palanterä, Director of Global Composites Business Development at Altair.

While many multiscale modeling frameworks exist, Multiscale Designer provides an unmatched combination of computational efficiency and predictive accuracy. Instead of implementing direct homoge

ATC Presentations, Videos

Concept Design - Get it Right From the Start

Presentation by Orlando Sadaro, Managing Director at Design 8.

If you are a designer then this presentation is right up your alley. Design seems to be an iterative process by nature. But what if we don't accept this default? What if we could get it right, from the start...? It would lead

ATC Presentations, Videos

Aspects of Heterogeneous System Models in Industrial Applications

Presentation by Robert Höpler, Founder of SysOpt GmbH.

Heterogeneity can be present on various stages in system modelling and simulation. A system model is often called ‘multi-domain’, when different technical domains are present, such as hydraulics, mechanics, and control. When it comes

ATC Presentations, Videos

Vortex Bladeless: A New Way to Collect Energy from Wind

Presentation by Jose Viyeira, R&D Project Engineer at Vortex Bladeless.

Vortex Bladeless is developing a technology that extracts energy from the wind thank to Vortex Shedding and Vortex Induced Vibrations (VIV). Among others, the main fields of investigation we are working on are CFD, F

ATC Presentations, Videos

Concept Modelling and Upfront Simulation

Design Review & Styling Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Concept Design with Altair Inspire

Concept Design with Altair Inspire seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Efficient and Accurate Material Engineering

The focus of the seminar is in introducing Altair Multiscale Designer, a framework for efficient and accurate multiscale modeling and simulation of composite and other heterogeneous materials. The development and validation of multiscale material ...

ATC Presentations, Videos

Study Based on Flux3D FE Models on the Influence in Induction Motors

Presentation by Virgiliu Fireteanu, Professor at Politehnica University of Bucharest.

Study based on Flux3D FE models of the influence of stator short circuit, broken rotor bar, and rotor eccentricity on EM torque and rotor unbalanced force in induction motors

ATC Presentations, Videos

Modelization of a Remote Control for Miniature Circut Breaker using Activate/MotionSolve Co-simulation and Flux3D

Presentation by Remy Orban, Senior Mecatronic Designer at Schneider Electric.

A business opportunity required the adaptation of a Miniature Circuit Breaker remote control for a specific application. To comply with time to market requirement, multiphysics model was the best way to run a fe

ATC Presentations, Videos

Model-Based Development with Altair

Presentation by Dr. Michael Hoffmann, Senior Vice President of Math & Systems at Altair.

Understand the motivation and vision for Altair’s Model-Based Development (MBD); the products involved; What’s New with the 2019 release of these products (including Basic Editions free for everyone!);

ATC Presentations, Videos

New MIPSE Solver for Sensor Dimensioning

Presentation by Loic Rondot, Sensor Modeling Expert at Schneider Electric.

The current sensors modeling is a real numerical challenge for electromagnetic modeling software. Physics is well mastered, but the accuracy expected for the crosstalk computation is generally crippling to use a comm

ATC Presentations, Videos

Simulation of a Gas Turbine and Generator System Under Steady State and Transient Conditions using Altair Activate

Presentation by Tomas Suguinoshita Quirino, GT2 Tecnologia.

This work presents the strategy created by GT2 Tecnologia to simulate the dynamics of a system comprised by a gas turbine coupled with an electrical generator, which is a typical schema for thermoelectrical powerplants. The mathe

ATC Presentations, Videos

Use of Coupled Euler Lagrange Computational Method to Simulate Ditching Problems

Presentation by Bertrand Langrand, ONERA.

The communication concerns advanced numerical simulations of the transient fluid structure-interaction occurring during aircraft ditching. While the structural model used the Finite Element method, the Arbitrary Lagrangian-Eulerian approach was cons

ATC Presentations, Videos
321 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!