Resource Library

ThyssenKrupp Elevator

ThyssenKrupp Elevator wanted to explore ways to ensure that an innovative, ropeless elevator system design was as lightweight as possible in order to maximize the loading capacity of the cabins. Altair ProductDesign was selected to explore methods...

Customer Story

EDAG: Developing Commercial Vehicles Inspired by Nature

As Germany's largest independent engineering
partner to the worldwide automotive industry,
EDAG is continuously seeking for new technology and for innovative processes to streamline vehicle development.

Customer Story

Climbing the Winner’s Podium with HyperWorks

HyperWorks allows for the option to increase the stiffness of the wheel shell through the use of OptiStruct. By applying HyperWorks to
their composite design and development process the team was able to increase the stiffness of the chosen components by 10 percent while learning how to do a structu

Customer Story

Top Use Cases: ProteusDS

Presentation introducing a few of the top use cases for the dynamics analysis software, ProteusDS.

Customer Story

Toyota Motorsport GmbH uses Altair‘s SAO System to better control software costs in its commercial Software tools

License monitoring delivering information about the actual scope of software usage with Altair’s SAO solution, improving decisions on software renewal and acquisition.

Customer Story

F.tech R&D North America

F.tech R&D North America utilizes HyperView to investigate test results, using the data to inform decisions on methods to improve designs. This data will often be used to create reports and presentations during the development process, using image...

Customer Story

Investigating Aeroelastic Performance of Multi-MegaWatt Wind Turbine Rotors Using CFD

Recent trends in wind power technology are focusing on increasing power output through an increase in rotor diameter. As the rotor diameter
increases, aeroelastic effects become increasingly important in the design of an efficient blade. A detailed understanding of the fluid elastic
coupling can l

Customer Story

Toyota Motorsport


TMG chose Altair’s Software Asset Optimization (SAO) system to address this problem. SAO (Software Asset Optimization) enables the user easy and efficient access of the actual software usage of

Customer Story

Taking Control of the Wind and Waves with DSA

A brief introduction to DSA, their two products available through the APA, and how they are applied to the oceanographic engineering process.

Video Testimonials

MAHLE

Analysis of MAHLE's automotive components and systems creates a huge amount of simulation data which is used to generate project reports. This reporting process can be a slow, manual process that ties up a great deal of the engineering team’s time...

Customer Story

FIAT Customer Story

FIAT chose Altair ProductDesign as a partner to perform a pilot project to investigate squeak and rattle. The project focused on studying issues on the FIAT UNO, a vehicle made exclusively for the South American market. Altair ProductDesign sugges...

Customer Story

Reducing Weight and Maximising Fuel Efficiency of a Formula Student Car with OptiStruct

Durham University Electric Motorsport (DUEM), are a UK-based team of students who design, build and race electric vehicles. In this project, DUEM wanted to demonstrate how they have applied the latest weight saving technology to achieve a faster, ...

Customer Story

Ford Battery Group Adopts RADIOSS Cut Methodology

In order to improve the simulation and accuracy of a high fidelity battery CAE model. Ford has turned to the cut methodology available in RADIOSS.

Customer Story

Gator Motorsports

Gator Motorsports utilized Inspire to redesign its brake pedal, as well as suspension bell cranks. This resulted in increased stiffness and a reduction of weight.

Customer Story

APEL Extrusions

APEL Extrusions employs die extrusion simulation software to test die extrusion performance. This allows APEL to greatly speed up the design process and test multiple simulations per week.

Customer Story

HyperMesh and Custom Export Template Streamline CFD Analysis in Research Projects at Arizona State University

Integrative Simulations & Computational Fluids Lab researchers from SEMTE (School for Engineering of Matter Transport and Energy) at the Arizona State University (ASU) wanted to use the commercial code HyperMesh as a general preprocessor to mesh c...

Customer Story

Composite Rotor Blade Analysis using Altair HyperWorks

As part of a senior design project – the design and analysis of a coaxial rotor craft –
Christopher Van Damme, at the time of the project senior undergraduate student within the
department of Engineering Mechanics at the University of Wisconsin-Madison, had to analyze
a composite made helicopter

Customer Story

Simulation: The Connection between Speed and Safety in Racing

Chassis manufacturer relies on simulation and optimization to develop the fastest – and safest – race cars on today’s circuits.

By Luca Pignacca

Customer Story

Topology optimization and new manufacturing methods enable lightweight design in agricultural engineering

Amazone develops and produces innovative agricultural technology, enabling and supporting modern and economical arable farming methods. For the re-design of an originally welded suspension component as a casting part, solidThinking Inspire was use...

Customer Story

Inspire for the Oil & Gas Industry

Inspire for the Oil & Gas Industry presentation given by Blaise Cole at ATCx Energy.

Customer Story

HyperWorks, especially OptiStruct is one of the central tools supporting the CAE efforts of BASF Engineering Plastics

Mathematical optimisation methods can provide significant support in virtual CAE part development. In the early phases of the project topology optimisation affords valuable clues to the design of the geometry of the part.

Customer Story

Innovative Drone Propulsion Design using Model-Based Development

To assist Kappa Electronics’ customer with controlling the motor for a new drone design, Altair’s solidThinking Embed was used for high speed simulation of motor electronics and control dynamics to develop a novel method of sensorless field-orient...

Customer Story

Lighter Helicopter Design

During the lifetime of a helicopter, every superfluous pound of weight costs the owner thousands
of Euros. These costs arise due to the additional fuel needed to move the extra mass thus limiting
the amount of cargo the helicopter can transport. To build lighter helicopters, Eurocopter, Europe’s

Customer Story

Dimensions Furniture

Dimensions Furniture incorporates industrial design and modeling software to design and render furniture products for presentation to buyers and direct handoff to manufacturing teams.

Customer Story

Developing an Injury Threshold for Human Brain Concussion

Directed by Dr. King Yang, Professor of Bioengineering, the Department’s Bioengineering Center is a leading laboratory focused on research into impact trauma, low back pain, and sports injury biomechanics. For the development of complete understa...

Customer Story

Designing Optimized Aluminum Castings with Fatigue Life Considerations

Andras Tanos, R&D Engineer at FemAlk ZRT, talks about how they have used Altair solutions for topology optimization of an engine part.

Video Testimonials, Videos

Optimization of Photovoltaic (PV) Mounting Structures – Savings on Material and Cost

Photovoltaic specialist Thesan, a subsidiary of global manufacturer Savio S.p.A, manufactures, and distributes mounting structures, consisting of a so-called Purlin, a Rafter, and a Pole (and Hat), designed to withstand potentially occurring loads...

Customer Story

Subros Leverages Altair HyperWorks® to Build Optimized Product Designs While Reducing 60% Simulation Time and 40% Prototyping Costs

Subros is the leading manufacturer of thermal products for automotive applications in India and operates in technical collaboration with Denso. Being a major supplier of AC units to the predominant automotive segments and all classes of vehicles p...

Customer Story

Evenflo

Evenflo employs topology optimization and generative design simulation for “sustaining engineering” where fast turnaround is essential for functional improvements of  infant car seats design.

Customer Story

PBS Professional at Chrysler: Managing 250,000 Simulations a Year

The people who design cars and trucks at Chrysler have been using computer simulation tools since the 1980s. Since those early beginnings, the use of computer-aided engineering and finite element analysis has expanded to become the powerhouse enab...

Customer Story

NASA


Using Altair’s own HyperWorks virtual simulation suite, Altair ProductDesign built an accurate finite element model of the module from CAD data supplied by NASA, as well as a section of water and air which matched the condition

Customer Story

Improving Rudder Shock Loading Following a Nearby Blast Event Using RADIOSS

Engineers in the Marine, Shipbuilding,
and Offshore industries face many
design challenges including physical
space constraints, extreme weather
conditions, deep water and remote
locations. These constraints create an
extreme environment for the engineer
to develop a sound, reliable and safe

Customer Story

Harita Seating Standardizes on Altair Suite of HyperWorks for all CAE Applications

HYperWorks used by leading Indian manufacturer of seating systems Harita, for homologation testing, regulations and crash analysis for all commercial vehicle seats, bus passenger seats and tractor & off-road seats

Customer Story

Opportunities in Packaging: Innovation & Savings

Technology allows companies to efficiently develop cost-effective, high-performance packaging systems.

Customer Story

Mando Softtech India Achieves Greater Simulation Accuracy with Altair HyperWorks®

As Manufacturers of Automotive Components such as Chassis and Brakes, Mando Softtech India has to ensure that they maintain highest performance and quality standards of the products they develop. Implementation of Altair HyperWorks solutions has h...

Customer Story

Auburn University applies HyperWorks to Optimize the Design of Composite Suspension Components and Monocoque for a SAE Formula Student Racecar

To optimize the car performance, the Auburn University SAE Racing Team focused on selected components that were most promising in terms of mass reduction with equal or increased stiffness. HyperWorks enabled them to reduce component mass-to-stiffn...

Customer Story

HyperWorks Improves Development Processes at Automotive Consultancy

csi entwicklungstechnik GmbH, a leading engineering service provider for the automotive industry has enhanced its simulation power with Altair‘s HyperWorks Suite. The company consolidated its CAE tools and now uses the large scale of HyperWorks, w...

Customer Story

HyperWorks in the Development of Aeronautic Sensors

Esterline Advanced Sensors offers its customers a broad range of high precision solutions for aeronautics (cockpit, airframe and engine) and derivative products for marine, defense and the industrial sector. Read the Case Study to see how HyperMe...

Customer Story

Monash Motorsport takes advantage of optimization and additive manufacturing technologies and wins again!

Since their first Australian SAE Student Racing competition in 2000, the Monash Motorsport team has steadily improved the performance of their race car. Recently the students discovered the benefits of combining Altair‘s OptiStruct optimization te...

Customer Story

Validation Ensures Trains Are on Track to Meet European Safety Standards

Numerical simulation aids in the design of passive safety systems to minimize passenger injury during railway
accidents.

Customer Story
342 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!