Resource Library

Integrated Design and Engineering Solutions

Melbourne-based Integrated Design and Engineering Solutions (IDES) provides full “systems-life-cycle” tailored engineering solutions to fulfill demanding defence requirements. For the LAND 121 Phase 3A project involving the procurement of Mercedes...

Customer Story

Fallbrook Technologies

Traction-based, patented NuVinci® transmission, is a continuously variable planetary (CVP) technology enabling performance and efficiency improvements for machines that use an engine, pump, motor, or geared transmission systems. Fallbrook Technolo...

Customer Story

A Motivating, Inspirational Forum for Learning: Thoughts from Attendees at the 2018 Global ATC

Thoughts from attendees express the energy and passion emanating through the exchange of knowledge, information, ideas and stories by technology leaders and industry executives at the 2018 Global Altair Technology Conference.

Video Testimonials

Developing Miniature Circuit Breakers with a Multi-Disciplinary System Design Approach

An Altair customer for many years, Schneider Electric at first used only Altair Flux; now the company has extended their usage to several more software products in the Altair HyperWorks suite, including solutions such as Activate, MotionSolve, Opt...

Customer Story

Simulating the Powertrain Development Process with AVL

A brief introduction to AVL, their three products available through the APA, and how they are applied to the powertrain development process.

Video Testimonials, Videos

Designing Optimized Aluminum Castings with Fatigue Life Considerations

Andras Tanos, R&D Engineer at FemAlk ZRT, talks about how they have used Altair solutions for topology optimization of an engine part.

Video Testimonials, Videos

Originating a safe Fun Utility Vehicle (FUV)

The challenge in the development of Arcimoto’s SRK Generation 8; an all-electric, multi-purpose/utility commuter vehicle, included creation of an optimized platform that offers
3-wheeled stability, a space frame enclosure for protection, and a rear swing arm that handles the load requirements and

Customer Story

Israeli Aerospace Industries and SpaceIL

IAI and SpaceIL utilized topology optimization with 3D modeling and rendering to design a 3D Printed thruster bracket to be used on its Google Lunar XPRIZE craft for its trip to the moon.

Customer Story

Smart City with Pozuelo de Alarcon

The citizens of Pozuelo de Alarcón in Spain wanted a cleaner and more efficient city. The goals were to protect the environment, decrease energy consumption, reduce CO2 emissions, and control expenses.The city council used SmartCore platform to re...

Customer Story

Better Indoor Climate thanks to Simulation and Optimization

Kampmann GmbH is an internationally leading specialist for heating, cooling, air-conditioning and integrated building automation. Within their virtual development process they are using the Altair HyperWorks® software suite, in particular AcuSolve...

Customer Story

Daimler

During the development of a new vehicle variant, Daimler wanted to explore the potential of utilizing a multi-disciplinary approach to optimization (MDO), whereby several attribute performance targets are considered in a single optimization study,...

Customer Story

More Efficient and Economic Injection Mold Tools thanks to Topology Optimization, CFD Simulation and 3D Printing

Toolmaking is usually characterized by cost-intensive, custom made, single-unit production. To create innovative tools, the industry increasingly relies on new manufacturing methods such as 3D printing. To meet market demand, PROTIQ GmbH, a spinof...

Customer Story

U-Shin

U-Shin is currently employing Altair Click2Cast to perform testing and optimization to create sound, redesigned automotive parts.U-Shin has seen significant time and cost savings by utilizing Altair Click2Cast.

Customer Story

Characterizing the Murchison Widefield Array Beam Pattern

A precursor to the SKA, the Murchison Widefield Array (MWA) radio telescope was constructed in the Murchison Radio-astronomy Observatory in Western Australia. In order to correctly calibrate and image the data collected by the radio telescope, it ...

Customer Story

ICAT Achieves Robust Structural Integrity of their Automotive Components using Altair HyperWorks®

The International Centre for Automotive Technology (ICAT) is an automotive testing and R&D centre. In their pursuit to carve a niche as a one-stop solution for the automotive industry’s needs in the areas of product design, testing and validation,...

Customer Story

Wilson Golf

Wilson has a strong relationship with Altair, having worked alongside Altair ProductDesign on a number of successful projects in the past and valuing the broad range of simulation and design technologies available in the HyperWorks and solidThinking software
suites. Altair’s technical and industria

Customer Story

Efficient Electromagnetic Actuator Prototype Design with Flux

Bitron is an automotive company producing mechatronic devices, such as actuators, sensors and switches. Siska Verhamme and Pablo Avarez, both Engineers at Bitron, describe their challenges and how Flux can help them, to accelerate the design proce...

Video Testimonials

Samsung Research Institute – Bangalore Adopts Altair Optistruct® for Optimizing Housing Design of a Smartphone

The mobile devices industry is fiercely competitive and companies are continuously being challenged to push the boundaries of their hardware design. With shorter design cycles and narrowing cost margins there has been greater emphasis on virtual t...

Customer Story

Case Study: Analysis of Elastic Moorings

Development of advanced Seaflex mooring system simulation capability in ProteusDS.

Customer Story

Mubea Relies on HyperWorks Unlimited™ for Automotive Component Design and Production

In performing lightweighting projects for large OEMs, Mubea is the only provider worldwide who delivers innovations of tailor-rolled blanks (TRB) which are ideal for not only vehicle body structural but also for suspension components that encounte...

Customer Story

Politecnico di Milano University

The Politecnico di Milano University implemented generative design software to quickly and easily identify the ideal shapes and materials for three architectural design concepts.

Customer Story

Application of HyperWorks to Develop Human Body Models to Assess Injury Potential for Vulnerable Populations in Vehicle Crashes

The effects of obesity on occupant responses
in frontal collisions were investigated using
the UMTRI whole-body human finite element
models. A modeling approach was developed
and applied that allowed for rapid change of a
baseline human body model into geometries
representing adults with diffe

Customer Story

Scania

Scania uses a simulation-driven design process including topology optimization and finite element analysis. This speeds up their design and development process and produces lighter, more efficient components.

Customer Story

Increasing Robustness and Reliability of a Race Car Engine with AcuSolve

This study is part of Prodrive’s implementation of AcuSolve to enhance its CFD capability after many years of outsourcing these simulations.

Customer Story

Dana Adopts Altair’s SimLab to Automate Meshing of Powertrain Models with Dramatic Time Savings

Dana Holding Corporation is a world
leader in driveline, sealing, and thermalmanagement
technologies that improve
fuel efficiency, reduce emissions and
lower the cost of ownership in passenger,
commercial and off-highway vehicles.
Dana's 25,000 employees operate in
27 countries within a netwo

Customer Story

HyperWorks in the Development of Aeronautic Sensors

Esterline Advanced Sensors offers its customers a broad range of high precision solutions for aeronautics (cockpit, airframe and engine) and derivative products for marine, defense and the industrial sector. Read the Case Study to see how HyperMe...

Customer Story

Medtronic

Reducing Medical Stent Stress by 71%

Medtronic designs and manufacturers medical devices used the world over. Traditionally, computer aided engineering (CAE) and virtual simulation were not fully utilized within the industry as the verification process for often microscopic compone

Customer Story

Structural Optimization Helps Launch Space Payloads

Aerospace company employs simulation software to reduce weight in the Launch Abort Manifold for the Orion Multi-Purpose Crew Vehicle.

By Blaine E. Phipps, Michael H. Young and Nathan G. Christensen
Concept To Reality Summer/Fall 2011

Customer Story

SmartCore optimizes fleet management at Boyaca

Boyacá has been handling the daily delivery of newspapers and magazines in Spain for more than 35 years. Fulfillment of time schedules is essential for customer satisfaction and late deliveries can result in additional costs. Boyacá needed to have...

Customer Story

Altair® HyperWorks® and Product Design Consultation at Force Protection

At Force Protection Inc. Altair HyperWorks and Product Design work together to increase CAE throughput and improve survivability prediction in a new class of military vehicles built for unconventional warfare.

Customer Story
350 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!