Resource Library

Calculation Management with Maple

Maple is a software tool that can handle all your mathematical needs, from performing simple calculations to advanced computations, visualizations, data analysis, and algorithm development. In this video, you’ll see how Maple also helps you maximi...

Videos

Simulation-Driven Development of Lightweight Brakes with Heavyweight Performance

Presentation by Martin Wollstad, Computational Engineer at Haldex Brake Products.

ATC Presentations, Videos

First-time-right Design of Matching Circuts for Complex Antenna dn RF Applications

Presentation by Jussi Rahola, CEO of Optenni.

The modern mobile phones and other wireless devices, matching circuits are commonly used to tune the antenna to operate at the desired frequencies and to broaden the operation frequency range of the antenna.

The goal of matching cir

ATC Presentations, Videos

Vehicle NVH Design and Development at Jaguar Land Rover using NVH Director

Presentation by Dr. Andrew Burke, Jaguar Land Rover.

Jaguar Land Rover is integrating Altair’s NVH Director into their Vehicle NVH development process. This will enable the formalization of model requirements and processes, ensuring that vehicle models are built to consistent standards an

ATC Presentations, Videos

Model-Based Development with Altair - Introduction and E-Mobility Use Cases Systems Simulation

Presentation by Andy Dyer, Senior Tech Specialist at Altair.

In this presentation, we'll take a look at a few examples of e-Mobility systems models built with Altair Activate and Compose and integrated with other tools like Flux, for electromagnetic simulation for electrical machines (mot

ATC Presentations, Videos

Simulation-based Design of a Traction Battery Cooling Plate

Presentation by Frank Cord Lohmann, Project Manager at Altair.

The steady shift from conventional (combustion) powertrains to hybrid or full electric powertrains goes hand in hand with a steady increase in traction battery size, power and capacity. While passive cooling (air cooling) migh

ATC Presentations, Videos

Quoting & Tooling: How to Improve Quoting through Casting Simulation

Presentation by Rainer Böke, CEO at Böke-IE GmbH & Co.

At the beginning of a project there is often the wish to calculate components even though there is no order yet. It is shown how a component can be calculated to identify specific problem areas without much effort and without high cos

ATC Presentations, Videos

Design of an Inverted Pendulum

Presentation by Nic Minnaar, Application Engineer at Altair.

ATC Presentations, Videos

Use of Simple and Complex Tools for Real World Applications 

Presentation by Professor Darrel Socie, Consultant.

Two case studies are presented to show the level of Analysis needed to solve the Fatigue problem. In the first case, the analysis could be carried out with a simple spreadsheet. The second case study involves a high value, large structure th

ATC Presentations, Videos

Using a Registered OML Function in HyperMesh to Ensure Reserve Factor is Met for Aircraft Fasteners

Presentation by Michele Macchioni, Director, ModVis Program and Development Management at Altair.

Using a realistic example of performing standard handbook-type calculations for aircraft structural components (in this case, calculating reserve factors for aircraft fasteners), learn how func

ATC Presentations, Videos

Altair's New Fatigue Platform, Altair HyperLife

Presentation by Hariprasad Gowda, OptiStruct Program Manager - Aerospace and Byung Soo Kang, Technical Specialist at Altair.

Even for complex computationally intensive problems, the UI must be simple and easy to use. Here we introduce the all easy to use, easy to learn fatigue analysis platfo

ATC Presentations, Videos

Digital Twin, Predictive Maintenance and In-service Simulation

The Digital Twin and IoT seminar features the key ideas behind the concept of the Digital Twin, predictive maintenance, and its practical relevance especially for product engineering and simulation.

Presentations recorded at the Global ATC in Paris, France on October 16, 2018.

ATC Presentations, Videos

Technology Showcase for Predictive Maintenance

Presentation by Ichiro Shibata, Director of Analytics Solutions at Altair.

New design concept for predictive maintenance using IoT, CAE and AI. Through the development process of an apparatus demonstration, you will learn how to utilize topology optimization and 3D-printing to improve the

ATC Presentations, Videos

CAD and FEA Validation with Model Verification Director

Presentation by David Ravi, Director SWAT Team at Altair.

ATC Presentations, Videos

Building and Managing Complex Assemblies with Ease in HyperWorks 2019

Presentation by Joe Kovacs, Director - Model Assembly at Altair.

ATC Presentations, Videos

Learn the New Geometry Manipulation, Meshing and Mid-mesh Extraction in HyperWorks 2019 and 2019x

Presentation by Michael Dambach, Vice President, HyperWorks Program Management at Altair.

ATC Presentations, Videos

The Central Place of an Image Rendering Tool in an Architectural Conception Process

Presentation by Jean Thiriet, Thea Render.

Within the course of an architectural project, the meeting of client objectives, site constraints and the architect's ideas gradually shapes the future building.

At the heart of this creative process, a virtual model is used to bring toget

ATC Presentations, Videos

How to Feed Simulation Models with SmartWorks

Presentation by Oliver Breuer, Head of Software Engineering at FLUIDON.

There is a life for simulation models beyond the development process. Despite the large amount of data that can be collected from industrial facilities, the real benefit is behind colorful graphics and charts. To get

ATC Presentations, Videos

Bridging the Gap Between Requirements and Analysis using ModelCenter with Altair Activate

Presentation by Ilya Tolchinsky, Phoenix Integration.

Phoenix Integration is a recently added member of the Altair Partner Alliance. Its product ModelCenter can create complex, fully automated simulation workflows and link these against Model Based Systems Engineering (MBSE) models. These

ATC Presentations, Videos

New MIPSE Solver for Sensor Dimensioning

Presentation by Loic Rondot, Sensor Modeling Expert at Schneider Electric.

The current sensors modeling is a real numerical challenge for electromagnetic modeling software. Physics is well mastered, but the accuracy expected for the crosstalk computation is generally crippling to use a comm

ATC Presentations, Videos

Recent and Future Developments in Flux and FluxMotor

Presentation by Vincent Leconte, Senior Director of Global Business Development - EM Solution at Altair.

ATC Presentations, Videos

Altair Inspire Studio Technology Preview

Presentation by Francesco Di Giuseppe, Evolve Application Specialist at Altair.

Franceso Di Giuseppe discusses the future of solidThinking Evolve and Altair Inspire Studio.

ATC Presentations, Videos

Industry 4.0 – How Digitalization Makes Weight & Balance Process More Agile and Connected

Kai Thräne, Manager Weight & Balance Research & Development at Airbus Helicopter presents at the 2017 European ATC.

In the context of Industry 4.0, most enterprise processes must become more digitized. A key element will be the evolution of the traditional product development toward a connected a

ATC Presentations, Videos

Showcase Video: RAMDO

Introductory Video to RAMDO from RAMDO Solutions. RAMDO is an uncertainty quantification, reliability analysis, and design optimization software platform.

Videos

Design Lightweight and Efficient Stamping Dies with Topology Optmization

Ford Otosan in Turkey designs big stamping dies with the help of topology optimization using OptiStruct. Weight savings of 20% were possible on their first attempt to try optimization on a new stamping part.

Video Testimonials

Design for High Performance Recreational Products

Pankaj Dubey, Country Head and Managing Director at Polaris India, presents at Converge 2016 in Bangalore, India.

ATC Presentations, Videos

Mega Data, Mega Structure, Mega City

Michael Peng, Technical Director and Senior Associate at Gensler, presents at Converge 2017 in Los Angeles, California.

ATC Presentations, Videos

Taming Smart Materials to Behave

Doris Sung, Founder of DOSU Studio Architecture, presents at Converge 2017 in Los Angeles, California.

ATC Presentations, Videos

Master Class: How to Design for Additive Manufacturing

This Master Class held at Converge 2017 in Essen Germany, presents the making of the 3iPRINT Project, which was a joint effort from csi entwicklungstechnik, APWORKS and EOS.

ATC Presentations, Videos

HyperWorks and OptiStruct in Composite Yacht Design

Reichel-Pugh Yacht Design is a leader in design and engineering of a wide variety of sailing yachts, from 14ft club racing dinghies to 100ft maxi superyachts that hold numerous race records in the world’s most prestigious yachting events. In addit...

ATC Presentations, Videos

Holistic System Performance Improvement

Raising efficiency by changing design paradigms for electric machines. This presentation was made at the CWIEME 2017 exhibition in Berlin, Germany, during June 2017

Videos

Space 4.0 or the Next Paradigm for the Space Industry

Franck Mouriax, General Manager of Structures at RUAG Space, presents at Converge 2016 in Essen, Germany.

ATC Presentations, Videos

We Have the Tools, But Let’s Not Lose Sight of the Knowledge

Rafa Corell, CEO at Indigraf, presents at Converge 2016 in Essen, Germany.

ATC Presentations, Videos

Sujan CooperStandard Achieves Lighweighting & Performance Targets with Altair

Sujan CooperStandard uses solidThinking Inspire, OptiStruct and HyperMesh to design a torsional vibration damper that meets NVH criteria, optimize bracket and various mount designs.

Videos

Cal Poly Pomona Uses HyperWorks to Design a Winning Formula SAE Racecar

Cal Poly Pomona applies HyperWorks to optimize the design of a new wheel shell and analyze laminates for a SAE Formula student racecar.

Video Testimonials

Showcase Video: Total Materia

Introductory video to Total Materia from Key to Metals.

Videos

An Interview with Ben Farmer of Robot Bike Co. Discussing the Development of their R160 Bike with Altair

Robot Bike Company (RBC) is a new startup established in the UK by aerospace engineers and mountain biking enthusiasts who identified the potential of combining additive manufacturing technologies with carbon fiber to, in their own words, “create ...

Videos

University of Tsukuba

Dr. Taisuke Boku, Deputy Director of University of Tsukuba, discusses how PBS Professional has helped manage the university's supercomputer business.

Video Testimonials

Introduction to HyperView

Altair HyperView is a complete post-processing and visualization environment for finite element analysis, multi-body system simulation, digital video, and engineering data. HyperView combines advanced animation and XY plotting features with window...

Videos

Kirchhoff Automotive

Hear how Kirchhoff Automotive improves resource utilization with the PBS Works suite of HPC solutions.

Video Testimonials
262 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!