Resource Library

Automotive NVH Development - Past, Present, and Future Technology Challenges

Dr. Per-Olof Sturesson, Senior Director Driving Dynamics and Noise & Vibration Centre at Volvo Cars, keynote presentation at the 2018 Global ATC in Paris, France.

Over the last decades, the utilization of CAE has increased substantially in the vehicle NVH refinement process. Today CAE is a fully

ATC Presentations, Videos

Durability Testing / Loads, Fatigue Curces and Material Datasets

Presentation by Axel Werkhausen, Manager FEMFAT Support and Sales at Magna Powertrain ECS.

ATC Presentations, Videos

Using Altair Compose Calculations & Scripts to Improve and Accelerate CAE Processes

Learn how to use Compose for 0D modeling & simulation, as complementary to 1D and 3D CAE simulations – to perform useful numerical computations; to do parametric modeling; to create scripts; to automate commonly repeated product development proces...

ATC Presentations, Videos

Structural Optimization for Fatigue Performance

Presentation by Byung Soo Kang, Technical Specialist at Altair.

Design optimized for strength may not be the optimum design for Fatigue performance. This presentation goes over how structural optimization can be used to enhance fatigue performance.

ATC Presentations, Videos

Different Level of Fatigue Analysis 

Presentation by Professor Darrel Socie, Consultant and Hariprasad Gowda, OptiStruct Program Manager - Aerospace at Altair.

In this presentation, we will discuss why there so many fatigue tools on the market and which ones are best.

ATC Presentations, Videos

Overview of MDO & Methodologies for Meeting the Challenges for Efficient MDO Execution

Presentation by Dr. Royston Jones, Executive VP, European Operations & Global CTO at Altair.

As products increase in complexity, design becomes more multi-disciplinary and the requirement to efficiently deploy Multi-Disciplinary Optimization (MDO) becomes a significant design differentiator. Incr

ATC Presentations, Videos

Socomec IoT Implementation of Altair IoT Stack

Presentation by Vincent Brunetta, Chief Digital Officer at Socomec Holding.

In this presentation you will learn how Socomec has leveraged Altair’s full IoT stack and architecture to build an end to end IoT solution. You will also learn via use case how a broad eco-system of partners with

ATC Presentations, Videos

A Concept-to-Digital-Twin Product Development Demonstration

Presentation by Nic Minnaar, Application Engineer at Altair.

Simulation technology has been a powerful tool in the arsenal of product developers because the technology buffers designers from the consequences of the physical world. The designers have thus been enabled to virtually explore

ATC Presentations, Videos

Deep Learning Image Recognition in Engineering Data Analysis

Presentation by Ichiro Shibata, Director of Analytics Solutions at Altair.

Practical information that engineers who are not data scientists should know to utilize DL as a tool for engineering data analysis. Possibilities of deep learning as alternatives to engineers' eyes and innovative d

ATC Presentations, Videos

Application of Machine Learning for Engineering Problems

Presentation by Fatma Kocer, VP Business Development Design Exploration at Altair.

Engineering design and operational decisions depend largely on engineers understanding of applications. This includes assumptions made to simplify problems to solve them. However, these assumptions often in

ATC Presentations, Videos

Fast and Efficient Modeling and Post-processing for Composites in HyperWorks 2019x

Presentation by Michele Macchioni, Director, ModVis Program and Development Management at Altair.

ATC Presentations, Videos

Taking Morphing to the Next Level: How to Leverage the New HyperWorks 2019x Free and Shapes Morphing Technology

Presentation by Jose Maria Cueva De Leon, Senior Program Manager at Altair.

ATC Presentations, Videos

Automated Reporting Director for Structure Analysis at OHB System AG

Presentation by Mariana Mendes Leal, Structural Engineer at OHB Systems AG.

Even as engineers, a considerable amount of our time is spent producing reports. These can be FE-Model Descriptions, Sine Response Analysis or papers detailing investigations carried out internally.

For

ATC Presentations, Videos

Modelization of a Remote Control for Miniature Circut Breaker using Activate/MotionSolve Co-simulation and Flux3D

Presentation by Remy Orban, Senior Mecatronic Designer at Schneider Electric.

A business opportunity required the adaptation of a Miniature Circuit Breaker remote control for a specific application. To comply with time to market requirement, multiphysics model was the best way to run a fe

ATC Presentations, Videos

Application of Altair HyperWorks and APA Products in Design of Gas-Turbine Engines

Presentation by Sergey Kutuev, Lyulka Design Bureau.

The presentation will demonstrate case studies performed by Lyulka Desigh Bureau enterprise with the application of Altair HyperWorks software products, such as HyperMesh and HyperView. Strength and optimization analysis carried out with

ATC Presentations, Videos

Concept Modelling and Upfront Simulation

Design Review & Styling Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Robotic Design of a Bushbot Chair

Presentation by Stephan Henrich, Robotikdesin und Architektur.

In this presentation, Stephan Henrich discusses several projects from different areas, including additive generative robotic fabrication and concept design.

ATC Presentations, Videos

Fast and Reliable Software Interfaces to Speed up the Design of Electric Motors

Presentation by Luigi Rizzi, Technical Director at SPIN Applicazioni Magnetiche.

The car industry is undergoing an unprecedented shift, between electrification, car sharing and autonomous drive. Car makers are going to roll out several zero-emission models in the next few years and their en

ATC Presentations, Videos

Electromagnetic Design and Multiphysics Simulation for the Creation of Innovative Products

This technical session focuses on design in electrical engineering, and especially on low frequency electromagnetic simulation. Presentations can be viewed of the latest advances in the Altair simulation solutions - Flux and FluxMotor. Several com...

ATC Presentations, Videos

Redesign and Topological Optimization of Transtibial Prosthesis by Reverse Engineering

Presentation by Eduardo Bajo, FEA Engineer at IDAERO.

Presentation of a project consisting of redesign with topology optimization of a transtibial leg prosthesis. It is a project in which the reverse engineering workflow has been followed, starting with 3D digitization of an amputated limb

ATC Presentations, Videos

Virtual Tryout - Digitalization for an Efficient Commissioning of Forming Tools

Presentation by Dr. Lars Penter, Head of Machine Technology at University of Dresden.

The life cycle of a forming tool consists of five major phases. It starts with the process and tool design followed by its assembly, the ramp-up and serial as well as spare part production. Due to every

ATC Presentations, Videos

Numerical Simulation of Distortions Induced During the SLM Process with Radioss 

Presentation by Laurent Van Belle, R&D Project Manager at IPC.

In order to analyse and control the dimensional quality created by SLM processes, an explicit numerical method has been developed by Altair to predict internal stresses and distortions. This numerical tool allows to study the

ATC Presentations, Videos

The Secret Lives of Models

Gael Salles, Director of Computer Aided Product Engineering Technology at Schneider Electric presents at the 2017 European ATC.

After a brief introduction of the changes in the Energy Landscape, an analysis of the life of models will be presented from the viewpoint of system engineering. Along wi

ATC Presentations, Videos

Multiscale Designer Product Video

Multiscale Designer can help achieving more accurate and cost saving results by looking into the individual constituent of composite materials. The tool is well suited for woven, short and long chopped fiber composites and integrates with Altair's...

Videos

Innovative Use of Composites for Organic Architecture

In this interview recorded at JEC World 2018, Atanas Zhelev, Chief Architect and co-founder at Digital Architects Ltd., talks about the innovative use of composites for organic architecture.

Composites offer designers the ability to create a material and engineer its properties to resist particul

Video Testimonials, Videos

Modeling the Induction Heating of Carbon Fiber Reinforced Thermoplastic

Altair’s low-frequency electromagnetic and thermal software, Flux™, offers a complete range of modeling tools able to take into account model specifications and streamline the design process.

Capitalizing on 36 years of innovation in the global context of design optimization and time-to-market r

ATC Presentations, Videos

Use of Composites Materials in Architecture

Atanas Zhelev and Mariya Korolova (Digital Architects - Vienna, Austria) and Daisuke Hirose (Archicomplex - Tokyo, Japan) made a design proposal for the Architecture competition for a bid at the Varna Library in Bulgaria. Their proposal features a...

Videos

The Digitalization of Biomimicry Design from the Ocean

Sebastian Möller, Projektleiter at ELiSE Alfred Wegener Institut, presents at Converge 2017 in Essen, Germany.

ATC Presentations, Videos

Towards Real-time Topology Optimization

Hod Lipson, Professor of Engineering and Data Science at Columbia University, presents at Converge 2017 in Los Angeles, California.

ATC Presentations, Videos

Efficient Injection Molding Tools through Optimization, CFD Simulation and 3D Printing

The company PROTIQ (www.protiq.com) worked with Altair and created a highly efficient molding tool. Optimization with OptiStruct was used to find the optimal design to guarantee the maximum tolerances of the generated products. The cooling process...

Videos

Wayne State University

Wayne State University discusses their use of PBS Professional.

Video Testimonials

Renishaw presents the first 3D printed metal bike based on solidThinking Inspire results

Renishaw's Product Marketing Engineer David Ewing is talking about the use of solidThinking Inspire for the first bike ever built with additive manufacturing and how optimization technology is essential to additive manufacturing.

Videos

S1 AM Bracket - Rupture Test Time Lapse

Additive manufacturing (AM) technologies have progressed rapidly in the last years. Supported by the recent developments of design optimisation tools and manufacturing capabilities, components and parts produced using AM are emerging more and more into the focus of space industry.
The aim of this p

Videos

Pure Michigan. We run on Brainpower

A presentation on Michigan’s automotive industry. An overview of the automotive strategy that was developed by the Michigan Economic Development Corporations automotive office and the continued work in the area of talent development including the...

Videos

Imperial College London

Watch this interview to see how Imperial College London benefits from using PBS Professional for cluster workload management.

Video Testimonials

Dr Royston Jones Presents at the 2014 WEAF Annual Conference

Dr Royston Jones give insight into the potential use of intelligent design technologies in creating innovative design concepts for the aerospace industry.

Videos

Aerodynamic Development of a Road Cycling Helmet with AcuSolve - LX Sim

LX Sim uses HyperWorks Suite and select Partner Alliance programs from Altair to help build an aerodynamic cycling helmet.

Videos

Introduction to HyperGraph

Altair HyperGraph is a powerful data analysis and plotting tool with interfaces to many popular file formats. Its sophisticated math engine is capable of processing even the most complex mathematical expressions. HyperGraph combines these features...

Videos

HyperWorks On-Demand at HYDAC

HyperWorks On-Demand helps HYDAC with optimization of fluid analysis.

Videos

Introduction to SimLab

SimLab is a process oriented, feature based finite
element modeling software that allows you to
quickly and accurately simulate engineering behavior of complex assemblies.

Videos
262 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!