Resource Library

Alternative Model Order Reduction in Elastic Multibody Systems

This was a 2013 European ATC presentation given by Dipl.-Ing. Philip Holzwarth from Institute of Engineering and Computational Mechanics University of Stuttgart. Reliable and fast simulations are of crucial nature in the modern development process...

Presentations

Structural Optimization and Laser Additive Manufacturing in lightweight design: barriers and chances

This was a 2013 European ATC presentation given by Dipl.-Ing. Jannis Kranz TUHH Technische Universität Hamburg-Harburg iLAS Institut für Laser- und Anlagensystemtechnik. With resource prices rising and becoming more and more volatile, lightweight ...

Presentations

Investigation of Electromagnetic and Thermal Behavior During Fast Dynamics in a PMSM Flux 2D/3D and Motor-CAD Simulation

2013 Flux Conference Presentation

Articles, Presentations

Transverse Flux Induction Heating of Magnetic Non Linear Sheets

FLUX Conference 2013 Presentation

Articles, Presentations

Flux API in Induction Heating Applications

2014 FLux Conference Presentation

Articles, Presentations

Verification of Fault Condition Behaviour of a Synchronous 2-Pole Generator Using Flux 2D Finite Element Analysis Software

Flux Conference 2012 presentation

Articles, Presentations

Enhancing Surface-breaking Flaw Detection by Induction Thermography Using Flux

2014 Flux Conference Presentation

Articles, Presentations

Design and Simulation of an Axial Gap Electromagnetic Brake with Flux 3D FEA Package

2014 Flux Conference Presentation

Articles, Presentations

High Efficiency Motor Design for Electric Vehicles

Flux Conference 2012 presentation

Articles, Presentations

Analysis of Hybrid Motor and Drive for Automotive Application

Flux Conference 2012 Presentation

Articles, Presentations

Reluctance Synchronous Motor Optimization

2014 Flux Conference Presentation

Articles, Presentations

JEC World 2019 Conference - Empowering Composites Innovation with Simulation

Altair hosted a conference at the JEC World composites expo in which leading innovators across multiple industries discussed how they leverage computer-aided engineering (CAE) simulation software to design, optimize, and validate their composite structures.

Videos

Keynote: Modern Architecture – Design Process, Tools and Technology

Neb Erakovic, Director Structural Design at CH2Mmace, was a keynote presenter at Converge 2016 in Essen, Germany.

ATC Presentations, Videos

Model-Based Development with Altair - Introduction and E-Mobility Use Cases Systems Simulation

Presentation by Andy Dyer, Senior Tech Specialist at Altair.

In this presentation, we'll take a look at a few examples of e-Mobility systems models built with Altair Activate and Compose and integrated with other tools like Flux, for electromagnetic simulation for electrical machines (mot

ATC Presentations, Videos

Optimization Driven Motor Design - Processes and Methodology

Presentation by Lars Fredriksson, Business VP - Simulation Driven Innovation at Altair.

This presentation offers insight how Altair has approached the challenge of improving the total design balance in E-motor development. The presented study has been executed with active support of Porsche AG.

ATC Presentations, Videos

Durability Testing / Loads, Fatigue Curces and Material Datasets

Presentation by Axel Werkhausen, Manager FEMFAT Support and Sales at Magna Powertrain ECS.

ATC Presentations, Videos

Electromagnetic and Mechanical Analysis of a Linear Actuator for House Appliance

Presented at the 2015 Flux Conference

Articles, Presentations

Using Flux and InCa3D for an Induction Heating Device: Evolutions Since 2010 Flux Conference

Presented at the 2013 Flux Conference

Articles, Presentations

Altair NVH Solutions - Americas ATC 2015 Workshop

This Workshop Presentation on NVH was conducted by Jianmin Guan at the Americas ATC on May 5, 2015. This workshop introduced Altair full frequency and multi-physics solutions for solving the most pressing problems in the NVH field. It provided an ...

ATC Presentations

Recent and Future Developments in Flux and FluxMotor

Presentation by Vincent Leconte, Senior Director of Global Business Development - EM Solution at Altair.

ATC Presentations, Videos

Designing Recurring AM Products for Ariane Launchers. Pushing Technology to Industrial Applications with New Design Tools and Processes

Presentation by Marta García-Cosío, CITD HO Engineering & Additive Manufacturing at CITD.

This presentation outlines a novel design approach that gives the opportunity of reducing the number of parts comparing with the traditional design while keeping the same functionality, achieving mas

ATC Presentations, Videos

UK ATC 2015: Optimisation Driven Design and Additive Manufacturing Applied for ESA Sentinel-1 Antenna

Presentation by Alejandro Cervantes Herrera, Altair

ATC Presentations

Simulation-Driven Design and Associated Altair Solutions

Presentation by Dr. Lars Fredriksson, Business VP, Simulation-Driven Innovation at Altair.

Dr. Fredriksson introduces Altair's MDO Director and MDO as a concept that leads to Simulation-Driven Design. Early concept development using C123 will also be discussed.

ATC Presentations, Videos

Airbus Global Migration to Altair HyperWorks for Modeling and Visualization

Presentation by Christophe Rigou, Linear & Non-Linear Solutions - ESCSAN at Airbus.

To support the next aircraft development and new derivative programs, AIRBUS Commercial Aircraft division has chosen HyperMesh and HyperView pre&post-processing software developed by Altair. The Patran t

ATC Presentations, Videos

Structural Optimization for Fatigue Performance

Presentation by Byung Soo Kang, Technical Specialist at Altair.

Design optimized for strength may not be the optimum design for Fatigue performance. This presentation goes over how structural optimization can be used to enhance fatigue performance.

ATC Presentations, Videos

Altair's New Fatigue Platform, Altair HyperLife

Presentation by Hariprasad Gowda, OptiStruct Program Manager - Aerospace and Byung Soo Kang, Technical Specialist at Altair.

Even for complex computationally intensive problems, the UI must be simple and easy to use. Here we introduce the all easy to use, easy to learn fatigue analysis platfo

ATC Presentations, Videos

Lightweight Design (Composites) - Americas ATC 2015 Workshop

This Workshop Presentation on Lightweight Design was conducted by Jeff Wollschlager and Sridhar Ravikoti at the Americas ATC on May 5, 2015.

Attendees to this workshop learned how to utilize the HyperWorks and Altair Partner Alliance suite of tools to design lightweight composite parts. The

ATC Presentations

How to Feed Simulation Models with SmartWorks

Presentation by Oliver Breuer, Head of Software Engineering at FLUIDON.

There is a life for simulation models beyond the development process. Despite the large amount of data that can be collected from industrial facilities, the real benefit is behind colorful graphics and charts. To get

ATC Presentations, Videos

Development of Carbon Fibre Floor Structure for the NIO Electric SUV

NIO are a global automotive startup producing electric vehicles for the China market. Our second vehicle, the ES6, was unveiled in December 2018 in Shanghai. It features a lightweight carbon fibre rear floor body structure, which will become the f...

ATC Presentations, Presentations

Durability Workshop

On September 27th, OptiStruct users presented the latest capabilities and advancements in simulation-driven design methods for noise and vibration, durability and fatigue solutions. In addition, Altair experts showcased the unique OptiStruct devel...

ATC Presentations

Altair SimSolid Technology Overview

An overview of the theoretical foundation of SimSolid, including mathematical background, computer implementation, and positioning among numerical methods.

Technical Papers

Different Level of Fatigue Analysis 

Presentation by Professor Darrel Socie, Consultant and Hariprasad Gowda, OptiStruct Program Manager - Aerospace at Altair.

In this presentation, we will discuss why there so many fatigue tools on the market and which ones are best.

ATC Presentations, Videos

Shielding Benchmark: Static Shielding and Eddy Current Shielding

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations

Using Workflow Automation Tools for the Multi-physics Optimization of Traction Motors

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations

Switched Reluctance Motor (SRM) Multiphysics Simulation

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations

Flux & Flux Motor: A Preview from the Inside

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations

Bridging the Gap Between Requirements and Analysis using ModelCenter with Altair Activate

Presentation by Ilya Tolchinsky, Phoenix Integration.

Phoenix Integration is a recently added member of the Altair Partner Alliance. Its product ModelCenter can create complex, fully automated simulation workflows and link these against Model Based Systems Engineering (MBSE) models. These

ATC Presentations, Videos

Application of Altair HyperWorks and APA Products in Design of Gas-Turbine Engines

Presentation by Sergey Kutuev, Lyulka Design Bureau.

The presentation will demonstrate case studies performed by Lyulka Desigh Bureau enterprise with the application of Altair HyperWorks software products, such as HyperMesh and HyperView. Strength and optimization analysis carried out with

ATC Presentations, Videos

Slotless-Halbach Lightweight Electric Machines and Unconventional Multi Layer Winding

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations

Analysis of Static Eccentricity Faults in Double Stator Single Rotor Axial Flux Surface-mounted Permanent Magnet Motors

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations
1767 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!