Resource Library

Use of Coupled Euler Lagrange Computational Method to Simulate Ditching Problems

Presentation by Bertrand Langrand, ONERA.

The communication concerns advanced numerical simulations of the transient fluid structure-interaction occurring during aircraft ditching. While the structural model used the Finite Element method, the Arbitrary Lagrangian-Eulerian approach wa

ATC Presentations, Videos

Developing the Electric Drivetrain of Tomorrow - How Numerical Tools can Support Cooling and Lubrication System Development

Presentation by Johannes Winklinger, Energy & Fluid Expert at Magna Powertrain.

We are right at the beginning of the new mobility era with deep impact on the architecture of cars. Hybridization and electrification are the dominating topics in the automobile industry and consequently the

ATC Presentations, Videos

Study Based on Flux3D FE Models on the Influence in Induction Motors

Presentation by Virgiliu Fireteanu, Professor at Politehnica University of Bucharest.

Study based on Flux3D FE models of the influence of stator short circuit, broken rotor bar, and rotor eccentricity on EM torque and rotor unbalanced force in induction motors

ATC Presentations, Videos

Numerical Simulation of Distortions Induced During the SLM Process with Radioss 

Presentation by Laurent Van Belle, R&D Project Manager at IPC.

In order to analyse and control the dimensional quality created by SLM processes, an explicit numerical method has been developed by Altair to predict internal stresses and distortions. This numerical tool allows to stud

ATC Presentations, Videos

Efficient and Accurate Material Engineering

The focus of the seminar is in introducing Altair Multiscale Designer, a framework for efficient and accurate multiscale modeling and simulation of composite and other heterogeneous materials. The development and validation of multiscale material ...

ATC Presentations, Videos

Recent and Future Developments in Flux and FluxMotor

Presentation by Vincent Leconte, Senior Director of Global Business Development - EM Solution at Altair.

ATC Presentations, Videos

A CFD Approach for the Assessment of Fuel Tank Sloshing Noise

Presentation by Matthäus Jäger, CFD Simulation Engineer at Magna Steyr Fuel Tec.

Fuel tank sloshing noise is becoming increasingly noticable as engines, especially hybrid vehicles in electric mode, become quiter. The general requirement is to avoid all possible noise audiable for pass

ATC Presentations, Videos

Saving Lives with Simulations: CEDREM Collaborates with DuPont on Ballistic Protection Solutions

Presentation by Edouard Ferry, CEDREM.

This study is a first step to study human body behavior during ballistic impacts and find injury thresholds. It combines many HyperWorks specificities such as composite modelling, hyper elastic material law, high speed impacts, equations of sta

ATC Presentations, Videos

Vortex Bladeless: A New Way to Collect Energy from Wind

Presentation by Jose Viyeira, R&D Project Engineer at Vortex Bladeless.
>
Vortex Bladeless is developing a technology that extracts energy from the wind thank to Vortex Shedding and Vortex Induced Vibrations (VIV). Among others, the main fields of investigation we are working on are

ATC Presentations, Videos

Efficient Multidisciplinary Modeling of a Washing Machine Motor Duty Cycle

Presentation by Dr. Martin Ortega, Principal Design Engineer at Mabe.

This work presents a systematic process of the electromagnetic and thermal analysis of a washing machine single-phase capacitor-run induction motor during a full wash cycle. By utilizing an electromagnetic solver

ATC Presentations, Videos

Modelization of a Remote Control for Miniature Circut Breaker using Activate/MotionSolve Co-simulation and Flux3D

Presentation by Remy Orban, Senior Mecatronic Designer at Schneider Electric.

A business opportunity required the adaptation of a Miniature Circuit Breaker remote control for a specific application. To comply with time to market requirement, multiphysics model was the best way to ru

ATC Presentations, Videos

Applied Fluid Dynamics, Thermal Management and e-Drive Oiling

Learn how industry leaders are using Altair's CFD solutions to drive innovation in their products and to cope with complex projects.

In the first part thermal management of electric drivetrains is addressed with a multiphysics approach to combine high-fidelity fluid flow and thermal

ATC Presentations, Videos

Multiscale Designer, A Multiscale Material Model Development Framework within HyperWorks

Presentation by Markku Palanterä, Director of Global Composites Business Development at Altair.

While many multiscale modeling frameworks exist, Multiscale Designer provides an unmatched combination of computational efficiency and predictive accuracy. Instead of implementing direct

ATC Presentations, Videos

Development of Super Lightweight Pedal Brackets for Mazda Motor Corporation

Presentation by Hideyuki Inaba, Asahi Kasei.

Asahi Kasei fuses topology optimization technology and resin design technology, and developed superlight weight pedal bracket for Mazda Motor Corporation. Although the metal brake bracket for the current MX-5 is lightweight, we could prop

ATC Presentations, Videos

Thermal and Impact Analysis of a Nuclear Flask Design

Presentation by Thomas Goulding, Mechanical Engineer at Assystem Energy and Infrastructure.

Nuclear transport flasks are used to store and transport nuclear waste material. When transported on public roads the flask must fulfill IAEA test requirements, which are designed to ensure t

ATC Presentations, Videos

Impact Simulation, Safety Analysis and Occupant Protection Strategies in CAE

Crash & Safety Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Defining Positioning System for Heavy Lift Barge with AcuSolve

Presentation by Pawel Sadowski, Technical Support Manager at DES ART.

Even during building roads your approach may be different from the standard one. The nature often forces engineers to use their creativity and go beyond typical projects. This leads to some unique, futuristic structur

ATC Presentations, Videos

New MIPSE Solver for Sensor Dimensioning

Presentation by Loic Rondot, Sensor Modeling Expert at Schneider Electric.

The current sensors modeling is a real numerical challenge for electromagnetic modeling software. Physics is well mastered, but the accuracy expected for the crosstalk computation is generally crippling to use

ATC Presentations, Videos

Model-Based Development with Altair

Presentation by Dr. Michael Hoffmann, Senior Vice President of Math & Systems at Altair.

ATC Presentations, Videos

System Simulation, Math Programming and Embedded Logic Design

Model-Based Development seminar held during 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Aspects of Heterogeneous System Models in Industrial Applications

Presentation by Robert Höpler, Founder of SysOpt GmbH.

Heterogeneity can be present on various stages in system modelling and simulation. A system model is often called ‘multi-domain’, when different technical domains are present, such as hydraulics, mechanics, and control. When it

ATC Presentations, Videos

Model Validation of a Seat Using Building Block Approach

Presentation by Sébastien Dépierre, Simulation Manager at Zodiac Seats France.

ATC Presentations, Videos

Simulation of a Gas Turbine and Generator System Under Steady State and Transient Conditions using Altair Activate

Presentation by Tomas Suguinoshita Quirino, GT2 Tecnologia.

This work presents the strategy created by GT2 Tecnologia to simulate the dynamics of a system comprised by a gas turbine coupled with an electrical generator, which is a typical schema for thermoelectrical powerplants. The

ATC Presentations, Videos

Form Follows Function - thyssenkrupp AG - Reinventing the Elevator Concept

Christian Kehrer presents on behalf of thyssenkrupp Elevator AG.

2017, thyssenkrupp Elevator AG has presented the MULTI concept, the world’s first rope-free elevator. The drive is ensured by a linear electromagnetic motor. To enable an economically feasible operation, it is necessar

ATC Presentations, Videos

Crash Simulation at Group PSA : Main Stakes and Perspectives

Presentation by Laurent Di Valentin, CAE Master Expert at PSA Group.

The constant improvements of the CAE process (from subsystem levels to the full car itself) and the development of optimization tools to reduce the mass and increase the performances led us to use the simulation as

ATC Presentations, Videos

Electromagnetic and Multiphysic Simulation

Electro-Mechanical Simulation Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Virtual Tryout - Digitalization for an Efficient Commissioning of Forming Tools

Presentation by Dr. Lars Penter, Head of Machine Technology at University of Dresden.

The life cycle of a forming tool consists of five major phases. It starts with the process and tool design followed by its assembly, the ramp-up and serial as well as spare part production. Due to

ATC Presentations, Videos

Fast and Reliable Software Interfaces to Speed up the Design of Electric Motors

Presentation by Luigi Rizzi, Technical Director at SPIN Applicazioni Magnetiche.

The car industry is undergoing an unprecedented shift, between electrification, car sharing and autonomous drive. Car makers are going to roll out several zero-emission models in the next few years and

ATC Presentations, Videos

Bridging the Gap Between Requirements and Analysis using ModelCenter with Altair Activate

Presentation by Ilya Tolchinsky, Phoenix Integration.

ATC Presentations, Videos

HyperWorks Brochure

Altair HyperWorks is the most comprehensive, open architecture CAE simulation platform in the industry, offering the best technologies to design and optimize high performance, weight efficient and innovative products.

Brochures

Composites Driving Innovation: Development of a Sit-Ski as an Advanced Technology Demonstrator

The National Composites Centre (NCC), in collaboration with the Manufacturing Technology Centre (MTC), Advanced Manufacturing Research Centre (AMRC) and University of Warwick (WMG) worked on a collaborative project to develop a Cross-Catapult tech...

Customer Story

Fast and Accurate Design of Electromagnetic Devices with Flux and FluxMotor

Altair Flux is a leading finite element simulation software for electromagnetic modeling. Used for more than 35 years in industry worldwide, and based on the most advanced numerical techniques, Flux has become a reference for the high accuracy it delivers.

Altair also recently introduced Altair F

Webinar Recordings

Taking Control of the Wind and Waves with DSA

A brief introduction to DSA, their two products available through the APA, and how they are applied to the oceanographic engineering process.

Video Testimonials

Altair Multiscale Designer Webinar: Taking Material Modeling to the Next Level

Multiscale modeling of composite materials has become a viable solution to reduce the amount of physical testing needed for accurately material characterization and to better assess the nonlinear material behavior and failure mechanisms in structural analysis.

Whether you are working with high-pe

Webinar Recordings

Hussmann India Achieves Greater Simulation Accuracy with Altair AcuSolve™

Hussmann provides tailored food safety solutions designed to improve food quality and integrity. As the manufacturer of refrigerated display cases and systems, they have to maintain the highest performance and quality standards of the products the...

Customer Story

ElectroFlo Brochure

Altair ElectroFlo™ is a fully featured and efficient thermal analysis software that combines the power of coupled thermal/electrical analysis with the ease-of-use of an object oriented GUI to provide solutions to challenging problems facing today'...

Brochures

Webinar: How to Instantly Assess Oceanographic Mooring Designs

This webinar presents a different way of solving a static mooring line profile and the effects on calculation speed, mooring profile design, and limitations for dynamic analysis. This webinar will include a brief overview of our dynamic analysis s...

Videos, Webinar Recordings

Webinar: First-Time-Right Design of Matching Circuits for Complex Antenna and RF Applications

In the webinar, the sources of the discrepancy between measurements and simulation will be identified. We will demonstrate a first-time-right design flow of matching circuit using the FEKO electromagnetic solver and the Optenni Lab RF Design Autom...

Videos, Webinar Recordings

Artemis Racing’s use of Simulation Driven Design Technology in Pursuit of the 2017 America’s Cup

Peter Bentley, Design Team Member at Artemis Racing presents at the 2017 European ATC.

The increase in velocity enabled by advanced structural composites and on-board control systems has been a true game changer, and the future of sailing will be increasing dependent on simulation driven design.

ATC Presentations, Videos

The Secret Lives of Models

Gael Salles, Director of Computer Aided Product Engineering Technology at Schneider Electric presents at the 2017 European ATC.

After a brief introduction of the changes in the Energy Landscape, an analysis of the life of models will be presented from the viewpoint of system engineering. Along wi

ATC Presentations, Videos
1350 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!