Resource Library

Motorcycle Crankshaft Modeling with SimLab at BMW Motorrad

Presentation by Roland Zettler, Development Engineer at BMW Motorrrad, Simulation and Predevelopment Power Train.

Motorcycle crankshaft simulation uses a detailed FE-mesh for structural and fatigue analysis. Due to long time durations for FE meshing, the idea was to establish a process fo

ATC Presentations, Videos

Lead Time Reduction in Modeling and Visualization

Seminar held during 2018 Global ATC in Paris, France on October 16, 2018.

ATC Presentations, Videos

Seamless integration of 0D-1D and 3D worlds

This webinar will introduce you to Altair Activate for control system design and the ease of solving real world problems with co-simulation between MotionSolve (multibody simulation suite) and Activate.

Training Videos, Videos, Webinar Recordings

System Simulation and Control: Improve the Overall Performance of your Mechatronic Systems using Altair Activate™

Discover a highly robust approach to simulate the performance of your entire product; assess the overall behavior of the multi-disciplinary system in the form of 0D, 1D and/or 3D models.

Webinar Recordings

Increasing Fidelity of Vehicle Dynamics Models

Activate models of a series-parallel hybrid electric vehicle powertrain coupled with CarSim via the Functional Mock-up Interface.

Training Videos

PMSM Simple Speed Control

Activate model of a permanent magnet synchronous motor (PMSM) with vector control for speed or torque.

Training Videos

Increasing Fidelity of Electric Engine Models

Comparison of 3 different engine models for an HEV vehicle: Park equations, full 3D Flux model, table method; later one generated by Flux2D.

Training Videos

Activate e-Mobility Series

This series discusses various aspects of system modeling for e-Mobility studies from overall performance simulations including fuel economy, to model refinements for electric engines and/or vehicle dynamics.

Training Videos

Fuel Economy Simulations

Activate model of a series-parallel hybrid electric vehicle powertrain to evaluate fuel economy and system performance.

Training Videos

Oracle Cloud: Altair ultraFluidX™ and Altair nanoFluidX™

Altair was founded in 1985 with a vision to use simulation to drive design and decision-making. Through the years simulation has evolved from the back end of the design process to the front — and today's cloud infrastructure opens up new possibili...

Videos

Use of Coupled Euler Lagrange Computational Method to Simulate Ditching Problems

Presentation by Bertrand Langrand, ONERA.

The communication concerns advanced numerical simulations of the transient fluid structure-interaction occurring during aircraft ditching. While the structural model used the Finite Element method, the Arbitrary Lagrangian-Eulerian approach was cons

ATC Presentations, Videos

Study Based on Flux3D FE Models on the Influence in Induction Motors

Presentation by Virgiliu Fireteanu, Professor at Politehnica University of Bucharest.

Study based on Flux3D FE models of the influence of stator short circuit, broken rotor bar, and rotor eccentricity on EM torque and rotor unbalanced force in induction motors

ATC Presentations, Videos

Multiscale Designer, A Multiscale Material Model Development Framework within HyperWorks

Presentation by Markku Palanterä, Director of Global Composites Business Development at Altair.

While many multiscale modeling frameworks exist, Multiscale Designer provides an unmatched combination of computational efficiency and predictive accuracy. Instead of implementing direct homoge

ATC Presentations, Videos

Vortex Bladeless: A New Way to Collect Energy from Wind

Presentation by Jose Viyeira, R&D Project Engineer at Vortex Bladeless.

Vortex Bladeless is developing a technology that extracts energy from the wind thank to Vortex Shedding and Vortex Induced Vibrations (VIV). Among others, the main fields of investigation we are working on are CFD, F

ATC Presentations, Videos

MOTH2

Presentation by Sylwester Szymanski, MOTH2.

Sylwester Symanski discusses the MOTH2 project, a 3-wheeled vehicle, and the use of Inspire and OptiStruct for topology optimization.

ATC Presentations, Videos

Efficient and Accurate Material Engineering

The focus of the seminar is in introducing Altair Multiscale Designer, a framework for efficient and accurate multiscale modeling and simulation of composite and other heterogeneous materials. The development and validation of multiscale material ...

ATC Presentations, Videos

How to Design Die-Casting Parts with Altair Inspire Cast

Presentation by El Abidi Ahmed, CAE Manager - Senior Expert at U-Shin Group.

ATC Presentations, Videos

Thermal and Impact Analysis of a Nuclear Flask Design

Presentation by Thomas Goulding, Mechanical Engineer at Assystem Energy and Infrastructure.

Nuclear transport flasks are used to store and transport nuclear waste material. When transported on public roads the flask must fulfill IAEA test requirements, which are designed to ensure that re

ATC Presentations, Videos

Modelization of a Remote Control for Miniature Circut Breaker using Activate/MotionSolve Co-simulation and Flux3D

Presentation by Remy Orban, Senior Mecatronic Designer at Schneider Electric.

A business opportunity required the adaptation of a Miniature Circuit Breaker remote control for a specific application. To comply with time to market requirement, multiphysics model was the best way to run a fe

ATC Presentations, Videos

Application of Altair HyperWorks and APA Products in Design of Gas-Turbine Engines

Presentation by Sergey Kutuev, Lyulka Design Bureau.

The presentation will demonstrate case studies performed by Lyulka Desigh Bureau enterprise with the application of Altair HyperWorks software products, such as HyperMesh and HyperView. Strength and optimization analysis carried out with

ATC Presentations, Videos

The Central Place of an Image Rendering Tool in an Architectural Conception Process

Presentation by Jean Thiriet, Thea Render.

Within the course of an architectural project, the meeting of client objectives, site constraints and the architect's ideas gradually shapes the future building.

At the heart of this creative process, a virtual model is used to bring toget

ATC Presentations, Videos

Model-Based Development with Altair

Presentation by Dr. Michael Hoffmann, Senior Vice President of Math & Systems at Altair.

Understand the motivation and vision for Altair’s Model-Based Development (MBD); the products involved; What’s New with the 2019 release of these products (including Basic Editions free for everyone!);

ATC Presentations, Videos

Recent and Future Developments in Flux and FluxMotor

Presentation by Vincent Leconte, Senior Director of Global Business Development - EM Solution at Altair.

ATC Presentations, Videos

Concept Design - Get it Right From the Start

Presentation by Orlando Sadaro, Managing Director at Design 8.

If you are a designer then this presentation is right up your alley. Design seems to be an iterative process by nature. But what if we don't accept this default? What if we could get it right, from the start...? It would lead

ATC Presentations, Videos

Defining Positioning System for Heavy Lift Barge with AcuSolve

Presentation by Pawel Sadowski, Technical Support Manager at DES ART.

Even during building roads your approach may be different from the standard one. The nature often forces engineers to use their creativity and go beyond typical projects. This leads to some unique, futuristic structures or

ATC Presentations, Videos

A CFD Approach for the Assessment of Fuel Tank Sloshing Noise

Presentation by Matthäus Jäger, CFD Simulation Engineer at Magna Steyr Fuel Tec.

Fuel tank sloshing noise is becoming increasingly noticable as engines, especially hybrid vehicles in electric mode, become quiter. The general requirement is to avoid all possible noise audiable for passengers

ATC Presentations, Videos

Robotic Design of a Bushbot Chair

Presentation by Stephan Henrich, Robotikdesin und Architektur.

In this presentation, Stephan Henrich discusses several projects from different areas, including additive generative robotic fabrication and concept design.

ATC Presentations, Videos

Concept Modelling and Upfront Simulation

Design Review & Styling Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Fast and Reliable Software Interfaces to Speed up the Design of Electric Motors

Presentation by Luigi Rizzi, Technical Director at SPIN Applicazioni Magnetiche.

The car industry is undergoing an unprecedented shift, between electrification, car sharing and autonomous drive. Car makers are going to roll out several zero-emission models in the next few years and their en

ATC Presentations, Videos

Redesign and Topological Optimization of Transtibial Prosthesis by Reverse Engineering

Presentation by Eduardo Bajo, FEA Engineer at IDAERO.

Presentation of a project consisting of redesign with topology optimization of a transtibial leg prosthesis. It is a project in which the reverse engineering workflow has been followed, starting with 3D digitization of an amputated limb

ATC Presentations, Videos

Electromagnetic Design and Multiphysics Simulation for the Creation of Innovative Products

This technical session focuses on design in electrical engineering, and especially on low frequency electromagnetic simulation. Presentations can be viewed of the latest advances in the Altair simulation solutions - Flux and FluxMotor. Several com...

ATC Presentations, Videos

Altair Inspire Studio Technology Preview

Presentation by Francesco Di Giuseppe, Evolve Application Specialist at Altair.

Franceso Di Giuseppe discusses the future of solidThinking Evolve and Altair Inspire Studio.

ATC Presentations, Videos

Crash Simulation at Group PSA : Main Stakes and Perspectives

Presentation by Laurent Di Valentin, CAE Master Expert at PSA Group.

The constant improvements of the CAE process (from subsystem levels to the full car itself) and the development of optimization tools to reduce the mass and increase the performances led us to use the simulation as one v

ATC Presentations, Videos

Efficient Multidisciplinary Modeling of a Washing Machine Motor Duty Cycle

Presentation by Dr. Martin Ortega, Principal Design Engineer at Mabe.

This work presents a systematic process of the electromagnetic and thermal analysis of a washing machine single-phase capacitor-run induction motor during a full wash cycle. By utilizing an electromagnetic solver and a

ATC Presentations, Videos

New MIPSE Solver for Sensor Dimensioning

Presentation by Loic Rondot, Sensor Modeling Expert at Schneider Electric.

The current sensors modeling is a real numerical challenge for electromagnetic modeling software. Physics is well mastered, but the accuracy expected for the crosstalk computation is generally crippling to use a comm

ATC Presentations, Videos

How to Feed Simulation Models with SmartWorks

Presentation by Oliver Breuer, Head of Software Engineering at FLUIDON.

There is a life for simulation models beyond the development process. Despite the large amount of data that can be collected from industrial facilities, the real benefit is behind colorful graphics and charts. To get

ATC Presentations, Videos

Bridging the Gap Between Requirements and Analysis using ModelCenter with Altair Activate

Presentation by Ilya Tolchinsky, Phoenix Integration.

Phoenix Integration is a recently added member of the Altair Partner Alliance. Its product ModelCenter can create complex, fully automated simulation workflows and link these against Model Based Systems Engineering (MBSE) models. These

ATC Presentations, Videos

Virtual Tryout - Digitalization for an Efficient Commissioning of Forming Tools

Presentation by Dr. Lars Penter, Head of Machine Technology at University of Dresden.

The life cycle of a forming tool consists of five major phases. It starts with the process and tool design followed by its assembly, the ramp-up and serial as well as spare part production. Due to every

ATC Presentations, Videos

Numerical Simulation of Distortions Induced During the SLM Process with Radioss 

Presentation by Laurent Van Belle, R&D Project Manager at IPC.

In order to analyse and control the dimensional quality created by SLM processes, an explicit numerical method has been developed by Altair to predict internal stresses and distortions. This numerical tool allows to study the

ATC Presentations, Videos

Form Follows Function - thyssenkrupp AG - Reinventing the Elevator Concept

Christian Kehrer presents on behalf of thyssenkrupp Elevator AG.

2017, thyssenkrupp Elevator AG has presented the MULTI concept, the world’s first rope-free elevator. The drive is ensured by a linear electromagnetic motor. To enable an economically feasible operation, it is necessary that

ATC Presentations, Videos
1446 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!