Optimize Your Control Strategies With the Virtual Engineering Lab
Simulation-based digital twins produce accurate representations of the machine’s behavior and performance. Those digital twins - e.g. created with Altair® Activate® or DSHplus - can be used for validation of control code if they can be calculated and visualized in real-time. Fluidon’s virtual engineering lab (VEL) implements digital twins via functional mock-up interface, calculates and visualizes them in real-time and connects to any controller hardware used for control code development. By linking digital twins with the control code, the VEL contributes to a holistic system understanding. This webinar uses the example of an excavator to show how a simulation-based digital twin can be created and implemented in the VEL. Then in the next step the control algorithm for a bucket grading operation is developed and tested – all before the excavator goes into service.
Presenter: Dr. Torsten Verkoyen | Managing Partner, Fluidon
Featuring DSHplus by Fluidon, available through the Altair Partner Alliance.
Highly Specialized Solutions under Altair’s Partner Alliance for Academic Market
The Altair Partner Alliance for Academic Market
One Platform. One License. One Source. All Access
Reducing Noise Emissions in Piping Systems with DSHplus and HyperStudy
Solve pressure oscillation problems with rapid analysis of acoustic behavior of arbitrary pipe (and hose) networks through DSHplus & Altair HyperStudy.
Simulation of Cavitating Flows and Gas Bubble Transport with DSHplus
The occurrence of cavitation negatively affects the performance of hydraulic systems. The impairments range from increased noise levels to severe and life-limiting wear of machine parts. Cavitation in hydraulic systems can be prevented by early integration of one-dimensional fluid power simulation software into the design process.
In this webinar, FLUIDON’s piping expert “RohrLEx” explains how cavitating flows can be simulated with the updated component models of DSHplus. The improved models enable the user to analyze all relevant types of cavitation – vapor cavitation, gas cavitation and pseudo-cavitation – as well as the associated phenomenon of gas bubble transport.
To illustrate the workflow when simulating a cavitation-endangered and/or gas conveying system with DSHplus, two exemplary cases are presented and discussed.
Pressure Oscillation Analysis
Pressure and flow ripple in fluid power systems are frequent causes of problems and complaints. In this article, learn how DSHplus is used to simulate hydraulic pressure ripple problems and learn how to analyze and solve the problem.
Pressure oscillation analysis in low-pressure fuel piping systems
In this article, the cause-effect relationships in low-pressure fuel piping systems and the value of simulation are discussed in a practical use case.
From BIG DATA to Smart Data to Digital Twin
Blog article by Katja Juschka, Head of Marketing and Sales at Fluidon.
Articles, Product Collateral
Model-Based Development with Altair - Introduction and E-Mobility Use Cases Systems Simulation
Presentation by Andy Dyer, Senior Tech Specialist at Altair.
In this presentation, we'll take a look at a few examples of e-Mobility systems models built with Altair Activate and Compose and integrated with other tools like Flux, for electromagnetic simulation for electrical machines (motor/generators), for the purpose of simulating power electronics and motor thermal behavior. We'll also take a look at integrating system model via third-party software like CarSim via the use of the Functional Mock-up Interface, which opens the door to a multitude of tools for further system integration, including packages like MapleSim and DSHplus in the Altair Partner Alliance.
ATC Presentations, Videos
Optimization of Oil and Gas Piping Systems with DSHplus
In this webinar ‘RohrLEx’, FLUIDON piping expert, explains the relationship between pressure pulsations and pipeline problems and the advantages in using differently specialized software for this process of optimization. So, he presents both an automatic analysis of pressure pulsations in piping systems with DSHplus and HyperStudy as well as the integration of a control created in Activate.
How to Feed Simulation Models with SmartWorks
Presentation by Oliver Breuer, Head of Software Engineering at FLUIDON.
There is a life for simulation models beyond the development process. Despite the large amount of data that can be collected from industrial facilities, the real benefit is behind colorful graphics and charts. To get there, the data provided by the connected components of an IoT capable system has to be analysed and put into context. So, the question is not what can be done with all the collected data but how to generate useful information. Using a simulation model in automated analysis allows estimating the condition of a subsystem or component, even though it is not directly monitored by dedicated sensors. Models created with DSHplus by FLUIDON (APA) can be exported to run as processing modules within IoT Platforms such as SmartWorks by Altair. They can be conditioned with the collected data and put it into the context of system behavior in order to make concrete statements about the current state of the system and its components. These digital twins turn the previous service life of simulation models into a closed cycle that includes product development, commissioning and operation and starts again when revisions and new developments are made on the basis of the existing system.
ATC Presentations, Videos
Solutions for Optimizing Hydraulic Piping Systems
In this webinar, “RohrLEx“, FLUIDON piping expert, explains the relationship between pressure pulsations and pipeline problems and presents the automatic analysis of pressure pulsations in piping systems with DSHplus and HyperStudy.
Case Study: Simulation Ensures Operation of Hydraulic Bridges
Explore the technical challenges of bascule bridges and how modeling hydraulic systems with DSHplus can help ensure safe and efficient operation of these bridges.
Case Study: Simulation of a Moving Soccer Field with DSHplus
The Veltins-Arena in Gelsenkirchen, Germany is known for outstanding soccer games. Keeping the field in top condition is a major concern. Check out how FLUIDON's DSHplus and solidThinking Activate were used to simulate moving the field in and out of the stadium to keep it in tip top shape.
Case Study: Mobile Applications - Simulation of Counter Balance Valves with DSHplus
Counter balance values are a popular choice for securing cylinders or hydro-motors to keep them from moving due to their own weight or the weight of a load. Lifting devices such as cranes and platforms, hydraulic bridges and industrial machinery all make use of counter balance valves.
Top Use Cases: DSHplus
Presentation introducing a few of the top use cases for the systems simulation software, DSHplus.
DSHplus for Aircraft Hydraulic Systems
Informational brochure highlighting how the 1D systems simulation software can be applied in the aerospace industry.
Brochures, Customer Stories, Product Collateral
DSHplus Hydraulic and Pneumatic Actuator Models for Aerospace Applications
This webinar demonstrates how DSHplus is able to support the general engineering of aircraft hydraulic systems with simulation models at typical system level detail as well as with high-fidelity physical models, which allow a comprehensive performance analysis and which also support simulation driven optimization techniques, to improve the system's performance.
DSHplus Tip: Using a Formula Automatically Calculate a Mass Spring Damper System
This video explains how to apply formulas to automatically calculate a mass spring damper system.
Brochures, Tips & Tricks
Co-Simulation: DSHplus + MotionSolve
Presentation outlining the multiphysics workflow between DSHplus and MotionSolve.
DSHplus + APA Usage Scenarios
One slide representing different use cases of the systems simulation tool within the APA.
DSHplus to MotionSolve Interface
Overview of the interface between DSHplus and MotionSolve
FLUIDON Company Brochure
FLUIDON Company Brochure