All Training Materials
Learn more about
  • Training Materials







  • Type


Using the MLFMM for Electrically Large Models

Consider the resource saving advantage of using the MLFMM for electrically large models.

Getting Started, Training Materials

RCS and Near Field of a Dielectric Sphere

Calculate the radar cross section and the near field inside and outside of a dielectric sphere using the surface equivalence principle (SEP).

Getting Started, Training Materials

RCS of a Thin Dielectric Sheet

Calculate the bistatic radar cross section of an electrically thin dielectric sheet. The sheet is modelled using the thin dielectric sheet approximation and is illuminated by an incident plane wave.

Getting Started, Training Materials

Calculating Field Coupling into a Shielded Cable

Calculate the coupling between a monopole antenna and a nearby shielded cable that follows an arbitrary path above a ground plane.

Getting Started, Training Materials

Antenna Radiation Hazard (RADHAZ) Safety Zones

Calculate the safety zones around a Yagi-Uda antenna based on radiation INIRC88 and NRPB89 standards. View the safety zone ISO surfaces.

Getting Started, Training Materials

Exposure of Muscle Tissue Using the MoMFEM Hybrid

Calculate the exposure for a sphere of muscle tissue illuminated by a dipole antenna.

Getting Started, Training Materials

Using a Non-radiating Network to Match a Dipole Antenna

Match a short dipole for resonance at 1.4 GHz with an LC matching section. The matched network is modeled using a Spice circuit and S-parameters.

Getting Started, Training Materials

Subdividing a Model Using Non-Radiating Networks

Calculate the input impedance of a circularly polarised patch antenna fed through a microstrip branch coupler. Replace the branch coupler with a non-radiating network and compare with a full solution.

Getting Started, Training Materials

Effect of Incident Plane Wave on an Obstacle Using Time Analysis

Observe the effect of an obstacle on a plane wave. Obtain frequency domain results using a wideband simulation using the method of moments (MoM). Perform post-processing of the frequency domain data to obtain a time response.

Getting Started, Training Materials

Waveguide Splitter with FEKO

See a demonstration of creating ana analysis of a waveguide splitter.

Getting Started, Training Materials

Optimization with FEKO

See a demonstration of the optimzation capabilities within FEKO on a bent dipole.

Getting Started, Training Materials

Pattern Optimisation of a Yagi-Uda Antenna

Optimise a Yagi-Uda antenna design to achieve a specific radiation pattern and gain at 1 GHz. The Yagi-Uda antenna consists of a dipole, reflector and two directors.

Getting Started, Training Materials

Implement Effective Manufacturing Process Analytics

By extracting real value from their data, manufacturers can make accurate predictions about component life, replacement requirements, energy efficiency, utilization, and other factors that have direct impacts on production capacity, throughput, quality, sales, customer acceptance, and overall efficiency.

eBooks

PollEx Unified Part Library Editor (UPE)

In this tutorial we will review the PollEx unified Part Library Editor for creating integrated part libraries.

Getting Started, Training Materials, Tutorials

PollEx PCB Thermal for Board Level Analysis

In this tutorial we will look at using PollEx to run a PCB Thermal Simulation for Board Level Analysis.

Getting Started, Training Materials, Tutorials

PollEx PCB Signal Integrity for Board Level Analysis

In this tutorial we will look at using PollEx to run PCB Signal Integrity for Board Level Analysis.

Getting Started, Training Materials, Tutorials

PollEx PCB Power Integrity for Board Level Analysis

In this tutorial we will look at using PollEx to run a PCB Power Integrity for Board Level Analysis.

Getting Started, Training Materials, Tutorials

PollEx PCB Redmark Plus for PCB Design Mark-up

In this tutorial we will look at the PollEx Redmark Plus capabilities for PCB design mark-up.

Getting Started, Training Materials, Tutorials

Activate for Hydraulic Simulation

In this course you will find 4 modules to help you learn how to use Altair Activate for Hydraulic Simulation.

eLearning

OptiStruct Optimization 2020

The purpose of this self paced course is to cover the basics of OptiStruct Optimization. The course contains modules introducing the basic optimization types and giving an over of each. Many exercises are available in the modules that use the See It, Try It methodology. See It allows you to watch a video demonstration of the exercise covered in the section, while Try It gives you a pdf and model to try it in the software on your own.

eLearning

Inspire Introduction 2020

In this course, you will have the opportunity to learn about the Inspire 2020 interface along with tools and workflows contained within Inspire. Modules contained within the course provide detailed descriptions of the tools and workflows within Inspire. You will also have the opportunity to watch and perform hands-on exercises within each module.

eLearning

Workflow for commercial antenna patterns

Altair Feko provides the necessary workflow for commercial antenna patterns.

Getting Started, Training Materials

Guide to Using Data Analytics to Prevent Financial Fraud

Financial fraud takes countless forms and involves many different aspects of business including; insurance and government benefit claims, retail returns, credit card purchases, under and misreporting of tax information, and mortgage and consumer loan applications.

eBooks

Altair SimSolid - ERP with Constant Loading Tutorial

Learn how to perform a dynamic frequency response analysis and evaluate the equivalent radiated power (ERP) with Constant Loading in Altair SimSolid.

Tutorials

Altair SimSolid - Hydrostatic Pressure Tutorial

Learn how to simulate an hydrostatic pressure in Altair SimSolid.

Tutorials

Altair SimSolid - Random Response Analysis Tutorial

Learn how to perform a random response analysis in Altair SimSolid.

Tutorials

Altair SimSolid - Thermo-structural Coupling Tutorial

Learn how to perform thermo-structural coupling analyses in Altair SimSolid.

Tutorials

Altair Inspire Studio - Manufacturing Drawings

The latest release of Altair Inspire Studio introduces a powerful set of capabilities to create detailed 2D drawings of complex 3D models and assemblies from multiple perspectives. Functionalities include one-click view creation, section and detail views, linear, angular, radial, and ordinate dimensions, as well as annotations. Once completed, drawings can be easily exported and printed.

Tutorials

Altair Inspire Studio - Design Tables

The latest release of Altair Inspire Studio introduces a new, quick, and easy way to explore design variations. Create design iterations on the fly using a design table. Quickly modify and set thresholds for the various parameters of a model, without having to dig through construction history. The entire model, including the design variables, can be exported to Altair HyperStudy to explore and evaluate different design alternatives.

Tutorials

Compose NVH

In this course you will find 6 modules to help you learn how to use Altair Compose for NVH.

eLearning

Basic Data Prep Using Monarch

Basic Data Prep will cover the simplest changes that can be made after the data has been extracted from Report Design. Once data is brought into the prepare window, it can be manipulated further while creating a repeatable and effective process. Mastering Basic Data Prep will allow the user to refine the information that they want to focus on.

Presentations, Training Materials

Introduction to Predictive Analytics and Machine Learning Using Altair Knowledge Studio

This session will be a general overview of just exactly what machine learning is and how it can add value to your business. Definitions of terms and an overview of what kinds of predictive analytics there are, and what is needed from a business perspective to take advantage of these predictive techniques. Attendees will be given examples of models and an introduction on how to take historical data, build models and create a reusable workflow.

Presentations, Training Materials

Advanced Analytics Using Altair Knowledge Studio

Building on the introduction class, this session will take the attendees on a journey into specific modeling examples, example on how to validate those models and finally analysis and test those models.

Presentations, Training Materials

Introduction to Visual Analytics with Altair Panopticon

Introduction to converting data into useful visual displays that show useful, actionable information.

Presentations, Training Materials

Advanced Data Prep Using Monarch

Taking you beyond simple column operations and transformations, the Advanced Data Prep module will explore how to recreate complex manual tasks in a repeatable fashion. Being familiar with these skills will allow user to address complex data transformation challenges and establish the relationship between column level operations and tabular level transformations.

Presentations, Training Materials

Advanced Real-Time Visual Analytics with Altair Panopticon

Advanced real-time display on data and how to use Panopticon to visually display quickly changing data when needed.

Presentations, Training Materials

Applications of EDEM for Construction and Mining Equipment Design

This eBook discusses the challenges linked to designing equipment intended to handle rocks, soils, ores and gravel. It introduces EDEM -bulk material simulation software- and explains how it can be used for the design, performance testing, and optimization of construction and mining equipment. The following topics are covered: - Challenges of designing heavy equipment handling bulk materials - What is EDEM simulation technology - CAE integration - Benefits of using EDEM simulation as part of the design process - Applications examples: dump trucks, excavators, dozers, loaders, grab buckets, and more - Case study: Increasing the operational performance of a truck load body at VR Steel

eBooks

What is the Discrete Element Method (DEM)?

This eBook describes the theoretical background behind the Discrete Element Method (DEM) - a particle-scale numerical method for modeling the bulk behavior of granular materials and many geomaterials such as coal, ores, soil, rocks, aggregates, pellets, tablets and powders. The following topics are covered: - Modeling Approaches - DEM Background - Particle Motion Calculations - Time Steps - Interaction Models - Contact Detection - Particle Shapes - Material Calibration - Geometries in DEM - Coupling DEM with other CAE tools

eBooks

Applications of EDEM in the Steelmaking Process

This eBook discusses how EDEM bulk material simulation can be used to optimize a range of operations and processes as part of the steelmaking process. - Raw material handling: transfer chutes, coal wagons, bucket elevators & screw augers - Processes: breakage, crushing, mixing, drying, vibration - Blast furnace loading and cohesive zone Learn how EDEM can help improve steel quality, energy efficiency and blast furnace performance.

eBooks

HyperWorks 2020

In this course you will have the opportunity to learn about HyperWorks. Modules contained within the course provide detailed descriptions of the tools and workflows within HyperWorks. You will also have the opportunity to watch demonstrations and perform hands on exercises throughout the modules. A login to Altair One is required to access this course.

eLearning

HyperWorks CFD v2020

In this course you will have the opportunity to learn about HyperWorks CFD. Modules contained within the course provide detailed descriptions of the tools and workflows within HyperWorks CFD. You will also have the opportunity to watch demonstrations and perform hands on exercises throughout the modules. A login to Altair One is required to access this course.

eLearning

Compose Signal Processing

In this course you will find 12 modules to help you learn how to use Altair Compose for Signal Processing.

eLearning

Applications of EDEM for Pharmaceutical Manufacturing Processes

This eBook provides an overview of common challenges involving particulates such as poor mixing, uneven coating, and pill breakage. It introduces EDEM - Discrete Element Method (DEM) software - and goes through examples of applications including mixing, agglomeration, comminution, die filling, tablet compaction, tablet coating and more.
Download this eBook to learn how EDEM can provide key insights otherwise difficult or sometimes impossible to measure - leading to optimized processes, better product quality, less physical prototyping, and cost savings.

eBooks

Applications of EDEM for Agricultural Machinery Design

This eBook discusses the challenges linked to working with crops, grains and soils. It introduces EDEM -granular material simulation software- and goes through examples of applications including combine harvesters, tillage tools, seeder equipment, and grain handling systems.

eBooks

SimLab sT - CFD-Thermal Analysis Of Complex Systems

This is an introductory session on SimLab for CFD and multi-physics simulation using Acusolve. A combination of lectures and exercises explain the modelling and physics setup of for complex assemblies. Leveraging on Altair Structural (OptiStruct) and CFD (AcuSolve) solvers , SimLab offers a streamlined workflow for CFD as well as Multiphysics simulation. The webinar also covers on extraction of Fluid volumes , boundary layers and physics setup and postprocessing in SimLab.

Training Materials, Webinars

Altair SimSolid - Adhesives Tutorial

Learn how to creates adhesives in Altair SimSold.

Tutorials

Altair SimSolid - Apply Bolt Pretension

Learn how to perform static analysis by applying bolt pretension in Altair SimSolid.

Tutorials

Altair SimSolid - Bushings Tutorial

Learn how to create bushings in Altair SimSolid.

Tutorials
Prev 1 2 3 4 5 6 7 8 9 Next
Have a Question? If you need assistance beyond what is provided above, please contact us.
Loading...