All Tutorials
Learn more about
  • Training Materials







  • Tutorials


  • Filter by






PMSM - Open Loop Current Control Simulation

Short introduction to the theory of open loop current control of a PMSM

Training Materials, Tutorials

Altair Embed - PMSM - Open Loop Current Control HIL

Hardware Used: TI LaunchXL-F28069M, BoostXL-DRV8301, Teknic M2310

Training Materials, Tutorials

Altair Embed - PMSM - Field Oriented Control Simulation

Short introduction to the theory of closed loop field oriented control of a PMSM

Training Materials, Tutorials

Altair Embed - PMSM - Field Oriented Control HIL

Hardware Used: TI LaunchXL-F28069M, BoostXL-DRV8301, Teknic M2310

Training Materials, Tutorials

Altair Embed - PMSM - Sensorless Field Oriented Control HIL

Employing TI's FAST (Flux, Angle, Speed, and Torque) observer

Training Materials, Tutorials

Altair Embed - PMSM - Motor Identification for InstaSPIN FOC

InstaSPIN: Motor Control solution from Texas Instruments.

Training Materials, Tutorials

Altair Embed - Digital Power - Simulation Blockset overview

Brief overview of the simulation blockset of the Digital Power Designer. In this video we look into and analyze a selection of bocks used for simulation (Compensators, PWM simulation, Voltage Mode Control simulation, Buck Converter).

Training Materials, Tutorials

Altair Embed - Digital Power - Coefficient Conversion

Select/tune the coefficients of a PID compensator. Users can calculate the digital coefficients from the analog component values or can tune the coefficients on the fly.

Training Materials, Tutorials

Altair Embed - Digital Power - Model Based Frequency Response Analysis

Details of the new block of the Digital Power Designer which lets user do a frequency response analysis.

Training Materials, Tutorials

Altair Embed - Digital Power - Code Generable

Simulate blocks of the Digital Power Designer which can be later used for code generation to download to a microcontroller. These blocks can be both simulated and used for code generation without any alterations.

Training Materials, Tutorials

Altair Embed Arduino - Dimming an LED in less than one minute

Introduction to pulse width modulation (PWM) and its use for dimming an LED

Training Materials, Tutorials

Altair Embed Arduino - Dimming an LED

Introduction to PWM and its use for dimming an LED

Training Materials, Tutorials

Altair Embed Arduino - Push Button Control

Introduction to State Charts

Training Materials, Tutorials

Altair Embed Arduino - Control the color of an LED using Potentiometers

Hardware used: 3x 10kΩ Potentiometers 4x 220Ω Resistors 1x RGB LED 1x Arduino 1x Breadboard

Training Materials, Tutorials

Altair Embed Arduino - Algorithm Validation using the Serial UART

Validating the algorithm for controlling the color of an LED

Training Materials, Tutorials

Altair Embed DC Motor Current Control

Prof. Duco Pulle introduces current control of a DC Motor using a Linear Actuator

Training Materials, Tutorials

Altair Embed Drone Control - Theory

Prof. Duco Pulle takes us through the theory of controlling a drone DC motor

Training Materials, Tutorials

Altair Embed Drone Control - HIL Setup

Prof. Duco Pulle explains and sets up the diagram for Hardware in the Loop control of a drone DC motor

Training Materials, Tutorials

Altair Embed - Drone Control - HIL Run

Prof. Duco Pulle controls a drone DC motor in an HIL diagram

Training Materials, Tutorials

Altair Embed - Salient PM Motor - Theory

Prof. Duco Pulle takes us through the theory of controlling a salient PM motor

Training Materials, Tutorials

Altair Embed - Salient PM Motor - Code Generation & HIL

Prof. Duco Pulle shows code generation and Hardware in the Loop control of a salient PM motor

Training Materials, Tutorials

Altair Activate DC-Motor

A DC motor comprised of mechanical and electrical subsystems

Training Materials, Tutorials

Altair Activate Double DC-Motor with belt

Two DC motors used to drive a belt

Training Materials, Tutorials

Altair Activate Two DC motors applied to clutch

Two DC motors applied to a clutch plate

Training Materials, Tutorials

Altair Activate Notch filter

Notch filter used to remove unwanted frequencies (noise) from a signal

Training Materials, Tutorials

Altair Activate Swingup Pendulum

Inverted pendulum by coupling multibody dynamics with controls (through co-simulation of MotionSolve and Activate)

Training Materials, Tutorials

Altair Activate Integrating CarSim via FMI

The Functional Mock-Up Interface is used to interface Activate with CarSim

Training Materials, Tutorials

Altair Activate RLC-circuit with different modeling approaches

Math, signal, and physical based modeling

Training Materials, Tutorials

Altair Activate Requirements Management

Activate Integration with the Systems Engineering Tool XLDyn

Training Materials, Tutorials

Altair Activate Rotational system

A rotational-translational system including damping due to friction

Training Materials, Tutorials

Altair Activate Clutch

A dry-plate clutch used to transmit power from engine to driven wheels

Training Materials, Tutorials

Altair Activate Accelerometer modeling

A mechanical accelerometer using transfer functions

Training Materials, Tutorials

Altair Activate Hoistway Modeling

A highrise building roped hoistway elevator system

Training Materials, Tutorials

Altair Flux - Electric Motor Design Analysis Tutorial

Video shows how to set up a simulation of a brushless permanent magnet motor to do a cogging torque analysis using Altair Flux™. Model is created using Flux dedicated Motor Overlay.

Tutorials

Altair Flux Actuator Design Tutorial

Complete set up, analysis, and post-processing of an electromagnetic actuator in Altair Flux™ 3D.

Tutorials

Altair Flux User Environment and Workflow

This brief video explains the general philosophy of how to use Altair Flux™. The video also shows how commands for geometry, mesh generation and general model setup can be accessed.

Tutorials

Catapult Tutorial 1: Ground, Rigid Groups, Joints and Contacts and Results

Using Inspire Motion, learn how to set up a motion simulation of a medieval catapult. This video covers the setup of ground, rigid groups, joints and contacts, and results

Tutorials

Catapult Tutorial 2: Actuators, Motors and Springs

Using Inspire Motion, learn how to set up a motion simulation of a catapult. This video covers the setup of actuators, motors and springs

Tutorials

SimLab Tutorials - Solver Setup for Thermal Steady State Analysis

Create material and apply properties; create user-defined contacts; apply thermal loads and define loadcases; define lines static loadcases with the temperature leadcase included; create proper solver settings for each loadcase; export and solve for multi-physics analysis

Tutorials

SimLab Tutorials - Setting up a CFD Steady State Analysis - Manifold

Define boundary and initial conditions; create material and apply properties; edit the solver settings to run the analysis

Tutorials

SimLab Tutorials - Conjugate Heat Transfer

Create a tetra mesh with CFD boundary layer; work with turbulence and temperature equations; define CFD boundary conditions based on inflow average velocities and convective heat flux; define symmetry plane; create material and define properties; run and post-process a CFD steady state analysis

Tutorials

SimLab Tutorials - Steady Flow in a Centrifugal Blower

Create a tetra mesh with CFD boundary layer; work with moving reference frame; define CFD boundary conditions based on turbulence viscosity ratio; edit the solver settings; run and post-process the analysis

Tutorials

SimLab Tutorials - Turbulent Flow in a Mixing Elbow

Import custom ribbon; create a tetra mesh with CFD boundary layer; apply CFD boundary conditions; run a steady state turbulent flow analysis; visualize results as contour or as vector

Tutorials

SimLab Tutorials - SPH Analysis with nFX - Drivetrain

Define nFX material and properties; apply simulation conditions; create nFX particles; export solver deck

Tutorials

SimLab Tutorials - Modal Frequency Response Analysis of a Crank Shaft

Create a modal frenquency response analysis in the solution browser; define an excitation load based on applied loads; create a table with modal damping values; define the solution settings and output requests; compute solution and review results; plot and X Y graph for the displacements versus frequency

Tutorials

SimLab Tutorials - Modal Frequency Response Analysis of a Sphere

Create isotropic and fluid material and define the properties accordingly; define acoustic behavior to a shell entity; apply enforced displacement to be used for an excitation load; create solver settings and output requests; compute the solution and review the results; plot an XY graph for the pressure versus frequency

Tutorials

SimLab Tutorials - Pre-Tensioned Bolt Analysis of Connecting Rod

Import material database, create washer surface and define property; create solid bolts with pretension; define loads, constraints and contacts; define loadcase and solver settings; compute and review the results

Tutorials

SimLab Tutorials - Linear Static Analysis of ConRod

Create linear static solution; define constraints and loads; define contacts; create material and apply properties; run the analysis and review the results

Tutorials
Prev 1 2 3 4 5 6 Next
Have a Question? If you need assistance beyond what is provided above, please contact us.
Loading...