All eLearning
Learn more about
  • Training Materials







  • eLearning


OptiStruct for Linear Analysis 2019

The purpose of this self paced course is to cover basic analysis types available when using OptiStruct for Linear Analysis. The modules use the See It, Do It methodology to cover the setup, run, and post-processing of the different analysis types. See It allows you to watch a video demonstration of the exercise covered in the module. Do It provides a PDF of the exercise and a model so you to perform the exercise on your own.

eLearning

Inspire 2019 Introduction

In this course, you will have the opportunity to learn about the Inspire 2019 interface along with tools and workflows contained within Inspire. Modules contained within the course provide detailed descriptions of the tools and workflows within Inspire. You will also have the opportunity to watch and perform hands-on exercises within each module.

eLearning

SimSolid 2019.5 Introduction

In this course you will have the opportunity to learn about the capabilities contained within SimSolid. Modules contained within the course provide detailed descriptions of the tools and workflows within SimSolid. You will also have the opportunity to watch and perform hands on exercises throughout the modules.

eLearning

HyperMesh Quickstart v2019

The purpose of this self paced course is to introduce HyperMesh to new users of the software. Most sections will use the See It, Do It methodology to cover the concepts. See It allows you to watch a video demonstration of the exercise covered in the section. Do It consists of a written exercise and model that can be opened in HyperMesh which allows you to perform the exercise on your own. Some sections will also contain interactive guides to provide a detailed description of the different options contained within a panel or browser.

eLearning

HyperView & HyperGraph Introduction v2019

In this course you will have the opportunity to learn about HyperView and HyperGraph in V2019. Modules contained within the course provide detailed descriptions of the tools and workflows within HyperView and HyperGraph. You will also have the opportunity to watch demonstrations and perform hands on exercises throughout the modules.

eLearning

HyperWorks for Aerospace Applications v2019

In this course you will have the opportunity to learn about the tools available in HyperWorks for aerospace workflows. Modules contained within the course provide detailed descriptions of the tools and workflows for use in the aerospace industry. You will also have the opportunity to watch demonstrations and perform hands on exercises throughout the modules.

eLearning

SimSolid 2019.4 Introduction

In this course you will have the opportunity to learn about the capabilities contained within SimSolid. Modules contained within the course provide detailed descriptions of the tools and workflows within SimSolid. You will also have the opportunity to watch and perform hands on exercises throughout the modules.

eLearning

Inspire Studio Introduction

In this course you will have the opportunity to learn about Inspire Studio Modules contained within the course provide detailed descriptions of the tools and workflows within Inspire Studio. You will also have the opportunity to watch demonstrations and perform hands on exercises throughout the modules.

eLearning

HyperWorks X CFD

In this course you will have the opportunity to learn about HyperWorks X CFD. Modules contained within the course provide detailed descriptions of the tools and workflows within HyperWorks X CFD. You will also have the opportunity to watch demonstrations and perform hands on exercises throughout the modules. A login to Altair Connect is required to access this course.

eLearning

HyperWorks X

In this course you will have the opportunity to learn about HyperWorks X. Modules contained within the course provide detailed descriptions of the tools and workflows within HyperWorks X. You will also have the opportunity to watch demonstrations and perform hands on exercises throughout the modules. A login to Altair Connect is required to access this course.

eLearning

Inspire Motion 2019

In this course you will have the opportunity to learn about Inspire Motion. Modules contained within the course provide detailed descriptions of the tools and workflows within Inspire Motion. You will also have the opportunity to watch and perform hands on exercises.

eLearning

Inspire Cast 2019 Introduction

In this course, you will have the opportunity to learn about the Inspire Cast 2019 interface along with tools and workflows contained within Inspire Cast. Modules contained within the course provide detailed descriptions of the tools and workflows within Inspire Cast. You will also have the opportunity to watch and perform hands-on exercises within each module.

eLearning

Inspire Form 2019 Introduction

In this course, you will have the opportunity to learn about the Inspire Form 2019 interface along with tools and workflows contained within Inspire Form. Modules contained within the course provide detailed descriptions of the tools and workflows within Inspire Form. You will also have the opportunity to watch and perform hands-on exercises within each module.

eLearning

SimLab sT 2019 Introduction

The purpose of this self-paced course is to provide an introduction to SimLab. The course contains information on the tools available in SimLab and provides exercises to provide you with practice in using SimLab. Models can be downloaded from within the module to practice the exercises on your own.

eLearning

Introduction to OptiStruct for Linear Analysis v2017

The purpose of this self paced course is to cover the basic topics for OptiStruct Linear Analysis. The Setup sections will use the See It, Do It methodology to cover the concepts. See It allows you to watch a video demonstration of the exercise covered in the section. Do It provides a PDF and a model that allows you to perform the exercise on your own.

eLearning

HyperView & HyperGraph Introduction v2017

In this course you will have the opportunity to learn about HyperView and HyperGraph in V2017. Modules contained within the course provide detailed descriptions of the tools and workflows within HyperView and HyperGraph. You will also have the opportunity to watch demonstrations and perform hands on exercises throughout the modules.

eLearning

Inspire 2018 Introduction

In this course you will have the opportunity to learn about the Inspire 2018 interface along with tools and workflows contained within Inspire. Modules contained within the course provide detailed descriptions of the tools and workflows within Inspire. You will also have the opportunity to watch and perform hands on exercises within each module.

eLearning

HyperWorks for Aerospace Applications v2017

The HyperWorks for Aerospace self-paced course covers the critical processes used in the creation of FEA models in the Aerospace industry. This course contains 12 modules covering aspects from model setup to post processing. Each module contains background information on the tools used and practical exercises with recorded demonstrations to help you get familiar with the tools and processes. Note: This course requires a login to Connect to view.

eLearning

HyperMesh Quickstart v2017

The purpose of this self paced course is to introduce HyperMesh to new users of the software. Most sections will use the See It, Try It, Do It methodology to cover the concepts. See It allows you to watch a video demonstration of the exercise covered in the section. Try It allows you to go through an interactive video which will guide you through performing the exercise. Do It consists of a written exercise and model that can be opened in HyperMesh which allows you to perform the exercise on your own. Some sections will also contain interactive guides to provide a detailed description of the different options contained within a panel or browser.

eLearning

OptiStruct for Structural Optimization

The purpose of this self paced course is to cover the basics of OptiStruct Optimization. The course contains modules introducing the basic optimization types and giving an over of each. Many exercises are available in the modules that use the See It, Try It methodology. See It allows you to watch a video demonstration of the exercise covered in the section, while Try It gives you a pdf and model to try it in the software on your own. Note: This course requires a login to Connect to view.

eLearning

OptiStruct for Linear Analysis

The purpose of this self paced course is to cover the basic topics for OptiStruct Linear Analysis. The Setup sections will use the See It, Try It, Do It methodology to cover the concepts. See It allows you to watch a video demonstration of the exercise covered in the section. Note: This course requires a login to Connect to view.

eLearning

Evolve Introduction v2016

This course contains a set of modules to help familiarize you with basics of using Evolve. We will cover an overview of the Evolve interface and working environment, creation of curves, creation of surfaces, transforming and editing surfaces, creating and editing PolyNURBS, and an overview of rendering models. Note: This course requires a Connect login to view.

eLearning

Inspire 2017 Introduction

In this course you will get an overview of the tools available within Inspire 2017, including the new Motion Analysis tools. We will cover all aspects from Optimization to Finite Element Analysis right through geometry tools to help redesign and simplify parts. Note: This course requires a Connect login to view.

eLearning

SimLab Basic Training V14

The purpose of this self paced course is to provide an introduction to SimLab. The course contains information on the tools available in SimLab and provides exercises to provide you with practice in using SimLab. Models can be downloaded from within the module to practice the exercises on your own. The menu in the course (on the left) can be used to jump to a specific module. Note: This course requires a Connect login to view.

eLearning

HyperWorks for Aerospace Applications v13

The HyperWorks for Aerospace self paced course covers the critical processes used in the creation of FEA models in the Aerospace industry. This course contains 12 modules covering aspects from model setup to post processing. Each module contains background information on the tools used and practical exercises with recorded demonstrations to help you get familiar with the tools and processes. Note: This course requires a Connect login to view.

eLearning

Evolve Introduction v2015

This course contains a set of modules to help familiarize you with basics of using Evolve. We will cover an overview of the Evolve interface and working environment, creation of curves, creation of surfaces, transforming and editing surfaces, creating and editing PolyNURBS, and an overview of rendering models. Note: This course requires a Connect login to view.

eLearning

Inspire 2018 Self Paced Training

The purpose of this self paced course is to introduce running optimizations with the Inspire environment.

eLearning

Evolve Self Paced Training

This course contains a set of modules to help familiarize you with basics of using Evolve.

eLearning

Introduction to HyperWorks Desktop for Aerospace Applications

This course is meant for HyperWorks Desktop users in the Aerospace environment. The course contains a tailored approach to using variuos tools within HyperMesh and HyperView for Aerospace users. Most Chapters will also contain demonstration videos based on Aerospace components.

eLearning
Have a Question? If you need assistance beyond what is provided above, please contact us.
Loading...