Solving Electromagnetic Interference Issues without Testing
Safe and compliant electronic system design is important across all industries. Conforming to EMC regulations while reducing development costs and time requires the implementation of simulation throughout the product design lifecycle. With increased adoption organizations reduce design iterations and costly laboratory testing while meeting targets. Learn how Altair PollEx and Feko are used to simulate EMI/EMC at the board, subsystem, and system level.
Accelerating Electronic Systems Development from Design to Manufacturing - Altair PollEx
Delivering electronics that delight consumers requires more than just linking the ECAD and MCAD worlds. It requires physics-based analysis at the speed of design and collaboration across disciplines throughout development. PollEx brings Altair’s simulation-driven design philosophy to the electronics industry, inspiring innovation while ensuring timing, performance, reliability, and compliance targets are met.
Product Overview Videos
Designing Double-Data Rate (DDRx) Memory Interfaces Right the First Time
More and more smart connected devices need high-speed DDRx memory interfaces. The design of memory circuits has always required care, but PCB layouts for DDR memory are more demanding and traditional rules-based approaches are no longer sufficient, especially for the latest DDRx memory interface standards. Learn how Altair PollEx enables the optimization of DDRx timing, transmission lines, topology, and terminations ensuring signal integrity.
Altair PollEx Advanced Capabilities
Altair PollEx is the most comprehensive and integrated set of PCB design review and verification tools in the market for electrical, electronics and manufacturing engineers. PollEx Advanced Tools includes PollEx PCB Verification (DFM, DFA, DFE, DFE+ and Logic DFE), Solver (SI, PI and Thermal), MFGs (Mounting Emulator, Metal Mask Manager, Soldering Amount Calculator and etc.) and PollEx PCB UPE (Unified Part Editor).
Product Overview Videos
Altair PollEx Basic Capabilities
Altair PollEx is the most comprehensive and integrated set of PCB design review and verification tools in the market for electrical, electronics and manufacturing engineers. PollEx Basic includes PollEx Modeler (PCB, CAM, BOM, Logic, CP).
Product Overview Videos
Optimizing Printed Circuit Board Manufacturing Webinar Recording
Learn how Altair PollEx can make a new product introduction (NPI) profitable faster by identifying potential issues earlier and increasing PCB manufacturing efficiency. The comprehensive DFM/DFA analysis includes fabrication, assembly, test, flex/rigid-flex, substrate and panel features. See how PollEx exports manufacturing and validation data to production line machinery for fabrication, assembly, and end-of-line testing.
How to Ensure Electronic System Reliability
Designing a reliable electronic system with minimum iterations is essential. Learn how to use Altair PollEx to review and improve PCB layouts earlier and drive robust designs with fast simulation tools for signal integrity, power integrity, thermal, EMI vulnerability and ESD protection, and more without relying on “rules of thumb”. Discover how PollEx fits into existing tool chains with unsurpassed connectivity to all the major ECAD systems.
PollEx PCB Verification for Design for Electrical Engineering Plus
In this tutorial we will look at using PollEx PCB verification for electrical engineering plus.
PollEx Mounting Data Extractor for Extracting SMT Library Format
In this tutorial we will look at using PollEx to extract the SMT library format using the Mounting Data Extractor.
PollEx Logic for Schematic Design Review
In this tutorial we will look at using PollEx for schematic design review.
PollEx PCB Worksheet Planner for PCB Design Working Planner
In this tutorial we will look at using PollEx to create the PCB design working planner.
PollEx Underfill for Generating BGA Underfill Location
In this tutorial we will look at using PollEx to find the BGA Underfill location using the Underfill option.
PollEx Block JIG Generator for Extracting Block JIG Files from PCB Layout
In this tutorial we will look at using PollEx Block JIG Generator to extract block JIG files from the PCB layout.
PollEx Solder Quantity Calculator for Estimating Solder Amount
In this tutorial we will look at using PollEx to estimate the quantity of solder on a model.
PollEx CAM for Gerber Review
In this tutorial we will look at using PollEx CAM to review Gerber data.
PollEx Metal Mask Manager for Generating and Managing Metal Mask
In this tutorial we will look at using PollEx to generate and manage the metal mask using the Metal Mask Manager.
PollEx Test Point Location Generator for Extracting Test Point Location
In this tutorial we will look at using PollEx to extract the test point location using the test point location generator.
PollEx Gerber to PCB for Converting Gerber to Intelligent PCB Design Format
In this tutorial we will look at using PollEx to convert gerber files to intelligent PCB design format.
PollEx Router Machine JIG Generator for Extracting Router JIG Data
In this tutorial we will look at using PollEx to extract router JIG data.
PollEx Mounting Emulator for Verifying the Component Location and Angle
In this tutorial we will look at using PollEx to verify the component location and angle using the Mounting Emulator.
PollEx Logic Verification for Logic Design for Electrical Engineering Logic DFE
In this tutorial we will look at using PollEx to to verify the DFE logic design for electrical engineering.
PollEx BOM for Reviewing a Bill of Materials
In this tutorial we will look at using PollEx BOM to review the bill of materials.
PollEx PCB Golden Sample for PCB Design Golden Sample Generator
In this tutorial we will look at using PollEx to generate a PCB golden sample.
PollEx GDSII Compare for Comparing and Extracting GDSII Format
In this tutorial we will look at using PollEx to compare and extract GDSII format using the GDSII Compare tool.
PollEx PCB Power Integrity for Board Level Analysis
In this tutorial we will look at using PollEx to run a PCB Power Integrity for Board Level Analysis.
PollEx PCB Redmark Plus for PCB Design Mark-up
In this tutorial we will look at the PollEx Redmark Plus capabilities for PCB design mark-up.
PollEx PCB Signal Integrity for Board Level Analysis
In this tutorial we will look at using PollEx to run PCB Signal Integrity for Board Level Analysis.
PollEx PCB Thermal for Board Level Analysis
In this tutorial we will look at using PollEx to run a PCB Thermal Simulation for Board Level Analysis.
PollEx Unified Part Library Editor (UPE)
In this tutorial we will review the PollEx unified Part Library Editor for creating integrated part libraries.
Design PCBs Right the First Time
Altair PollEx with its comprehensive and integrated set of PCB design viewing, analysis and verification tools helps organizations to:
Improve communication among multiple discipline engineers by overcoming difficulties due to usage of different data (structure) and application (toolsets).
Incorporate practical solutions and customizing features vetted by global electronic leaders.
Significantly reduce the number of design reviews and thereby achieve better time to market and cost
Reduce PCB Design Reviews From Design to Manufacturing Using Altair EDA Solution
Printed Circuit Boards (PCBs) are integral part of the electronic devices. Though the complexity of the PCBs has evolved tremendously over the years, the design life cycle hasn’t changed and remains sequential with separate databases and component libraries for each stage.
This webinar presents Altair’s unified solution for PCB design considerations, including DFM, DFA, DFE, Signal Integrity and Thermal Analysis.
PollEx PCB Verification for Design for Assembly (DFA)
Get started with PollEx Verification for DFA, where PollEx’s rule-based DFA checking tool covers the manufacturing assembly areas of collision, lead, soldering, placement, component height, component and board, stability.
PollEx PCB Modeler for PCB Design Review
Get started with PCB Modeler, easy-to-use and collaborative application, central application of PollEx with unsurpassed connectivity to major ECAD systems, to quickly visualize and review PCB designs without losing any ECAD design data.
PollEx CP for PCB Design Comparison
Get started with PollEx CP, part of PollEx Suite, to easily and automatically compare different PCB designs and revisions, including schematics, layouts and BOM and with the possibility to export comparative reports with the results
PollEx PCB Verification for Design for Electrical Engineering (DFE)
Get started with PollEx Verification for DFE, where PollEx’s rule-based DFE checking tool covers the electrical areas related to SI, PI, EMI and ESD including high speed signals, differential pairs, common nets, power filters, stub, antenna ground, return path, shielding for net or component, routed copper area, components and boards.
PollEx PCB Verification for Design for Manufacturing (DFM)
Get started with PollEx Verification for DFM, where PollEx’s rule-based DFM checking tool covers the manufacturing areas of board, component, drill, FPCB, package, pad, presence and size of masks for manufacturing equipment, pattern, optimization of via annular ring, placement and tooling and PCB space.
Reduce PCB Design Reviews From Design to Manufacturing
In this webinar we showcase Altair Pollex - a comprehensive EDA software solution that is based on an easy-to-use collaborative application, with unsurpassed connectivity to all the major ECAD solutions. Pollex is already the trusted go-to solution for many key global players such as Samsung, LG and Qualcomm - enabling them to quickly visualize and review PCB designs, and ultimately go to market faster. Pollex also provides a powerful and reliable solution to detect design faults in the early development stages that could cause electrical failures or occur during the manufacturing and assembly of PCBs.
Introduction to Altair PollEx
This webinar introduces the benefits of PollEx for fast PCB design viewing and exploration, analysis (including signal integrity and thermal), verification (considering electrical, assembly, and manufacturing constraints), and how these solutions work within the unified PollEx electronics part data management software.
Altair Acquires Polliwog Co. Ltd, Growing Software Toolset for Electronic Design Automation (EDA)
Design and engineering require a system-level view of products and systems. The integrated design of mechanical behavior and electronics is a trademark of today’s product development. Based on a strong foundation of mechanical simulation software, Altair has expanded into areas of systems simulation and electromagnetics. Altair’s Pollex PCB solvers and verification tools extend these capabilities into a new domain, allowing Altair to provide software for system-level design decisions.
Product Overview Videos