novaflow-solid

The Future of a More Responsible Foundry Industry

Håkan Fransson from NovaCast Systems AB, an APA partner, discusses the future of a more responsible foundry industry.

Video Testimonials

Highly Specialized Solutions under Altair’s Partner Alliance for Academic Market

The Altair Partner Alliance for Academic Market One Platform. One License. One Source. All Access

ATC Presentations

Saving Time and Money with NovaFlow&Solid

Learn how Automotive Components Floby (AC Floby) saves time and money using NovaFlow&Solid.

Customer Stories

The Benefits and Hurdles of Using Shot Sleeve Simulation: A Case Study of a BMW Clutch Housing

The casting process simulation, as a tool to detect and eliminate problems in the die casting process and possible defects in the cast parts at an early stage, can be further improved by considering the processes in the shot sleeve. This will be illustrated in this webinar using an aluminium die cast part, a BMW clutch housing, with results from various shot sleeve simulations. Different procedures for dosing and the sequence of the first filling phase are compared. Important basics and influencing factors are described. Advantages and disadvantages in the casting process and consequences for the cast part quality are presented.

Webinars

NovaCast Systems Showcase Video

A short video by Hakan Fransson who highlights the casting simulation process with software application NovaFlow&Solid

Video Testimonials

Parameter and Casting Optimization

This webinar will demonstrate the possibilities and procedures to optimize a casting design by the help of casting process simulation. In combination with the simulation, we'll show how one can use what we call parameter and geometry optimization. By statistical methods and advanced analysis, one can go into the depth of the simulations to understand how you can improve the casting quality.

Webinars

The Success Story of Lundbergs Pressgjuteri

Mattias Melin tool manager from AB Lundbergs Pressgjuteri uses NovaFlow&Solid to predict future challenges.

Customer Stories

Using NovaFlow&Solid to Simulate Filters

Simulate pressed filters, foam filters, and a combination of foam and extruded filters with NovaFlow&Solid.

Technical Papers

NovaStress Brochure

NovaStress is an add on program to NovaFlow&Solid that calculates the stresses which occur in the casting during solidification and cooling down of the material.

Brochures

Why Use Casting Simulation?

Examples of how and when casting simulation can improve designs.

Customer Stories

Quick User Guide: Low Pressure Casting with NovaFlow&Solid CV

Quick start guide for simulating low pressure casting with NovaFlow&Solid CV.

Brochures

NovaFlow&Solid Brochure

Brochure showcasing gravity casting and high pressure die casting simulation software NovaFlow&Solid.

Brochures

NovaFlow&Solid Gravity Casting Technical Specifications

This document provides an overview of the of the necessary requirements to successfully run NovaFlow&Solid for gravity casting.

Brochures, Technical Papers

NovaFlow&Solid High Pressure Die Casting Technical Specifications

This document provides an overview of the of the necessary requirements to successfully run NovaFlow&Solid for high pressure die casting.

Technical Papers

NovaFlow&Solid Lost Wax Casting Technical Specifications

This document provides an overview of the of the necessary requirements to successfully run NovaFlow&Solid for lost wax casting.

Brochures, Technical Papers

Simulation-Driven Casting Design

The webinar will present the basic rules of designing castings and how casting process simulation can help you design correct castings. The webinar will show examples on how to improve a casting design, what road map to follow and which parameters are most important. The traditional way of designing is to take the casting process simulation into account at the end just before the production should start, however, this webinar will show why you should do it at the very start of the designing process.

Webinars

What's New - NovaFlow&Solid 6.3

Highlights and new features in the latest release of NovaFlow&Solid from NovaCast Systems.

Technical Papers

Case Study: Using Parameter Optimization

Performing parameter optimization in NovaFlow&Solid.

Customer Stories

NovaCast - Utilizing the Full Capability of the 6.0 Version

The webinar will provide information about the functionality and potentials using NovaFlow & Solid CV 6.0 and the new functionality in that version. It will be showing both the potential for designers of castings as well as foundry engineers.

Webinars

Altair Offers Flexibility and Enhancement for Casting Process Design and Optimization

The goal of the project outlined in this paper is to get the optimal gating system (size and position of ingate) to help avoid porosity and other common defects in the produced parts, achieving the final design to begin casting the component.

Brochures, Customer Stories

Top Use Cases: NovaFlow&Solid

Presentation introducing a few of the top use cases for the casting simulation software, NovaFlow&Solid.

Customer Stories

NovaFlow&Solid Tip: Dual Mesh Function

The advantage of using dual-mesh is that the detail can be filled with a slightly smaller mesh solution and then solidify with a higher solution, to ensure as high accuracy as possible using minimum time. Learn how to apply it with this document.

Tips & Tricks

NovaFlow&Solid CV Use Case: Heavy Machinery

NovaFlow&Solid CV (NFS), from NovaCast, is a casting process simulation system that can simulate virtually any type of casting. NFS simulates casting components used in the heavy machinery industry, regardless of if they are small or big, simple or complex.

Customer Stories, Product Collateral

Introduction to NovaFlow&Solid - Casting Process Simulation

The webinar is intended that the attendees will learn more about the functionality and potentials using NovaFlow&Solid for Heavy Industry manufacturing and development of the castings. NovaFlow&Solid is a casting process simulation program that we believe is FASTER, EASIER and MORE accurate than the competing softwares.

Webinars

NovaFlow&Solid Product Overview Video

Short introductory video to casting simulation software by NovaCast.

Product Overview Videos

NovaFlow&Solid Foundry Center Demo

Guided tutorial video of the Foundry Center in NovaFlow&Solid.

Videos

NovaFlow&Solid Tutorial Video: HPD

General guide video for using NovaFlow&Solid HPD.

Videos

NovaFlow&Solid CV Tutorial Video: Advanced Import

Advanced tutorial demonstrating proper file import.

Videos

NovaFlow&Solid Tutorial Video: Piston Movement Function

Tutorial video specific to using the piston movement function in NovaFlow&Solid.

Videos

NovaFlow&Solid Tutorial Video: HPD Cycling

Tutorial video illustrating NovaFlow&Solid HPD Cycling.

Videos

Advanced NovaFlow&Solid Training Presentation

Presentation explaining, in detail, how to apply NovaFlow&Solid for casting simulation.

Brochures

NovaFlow&Solid HPD Step by Step Guide

Introductory guide for use of NovaFlow&Solid CV HPD.

Brochures

Level 1 - Basic NovaFlow&Solid Training

Introductory training for NovaFlow&Solid by NovaCast.

Webinars

Level 2 - Improve your casting design using NovaFlow&Solid

Mid-level training using NovaFlow&Solid to improve your casting designs.

Webinars

Use Casting Simulation to Optimize Product Design, Quality and Material Strength in the Production of Castings

Hakan Fransson, from NovaCast Systems expands upon how casting simulation can help optimize designs for production.

Brochures

Partner Spotlight: Hakan Fransson from NovaCast

Discussion with Hakan Fransson, CEO of NovaCast, about benefits and uses for casting simulation software NovaFlow&Solid.

Brochures