By performing structural analyses on fully featured CAD assemblies within minutes, SimSolid is the game-changing simulation technology for designers, engineers, and analysts. It eliminates geometry preparation and meshing: the two most time-consuming, expertise-extensive, and error-prone tasks performed in a conventional structural simulation. Early-stage assessment of complex assemblies can be particularly challenging for CAD-based simulation tools and FEA alike, but SimSolid is tolerant of imprecise geometry, meaning no simplification of complex geometries is needed before analyzing designs. Multiple design scenarios can be simulated quickly under real-life conditions, providing the simulation power to help accelerate engineering decisions, aid development of quality products, and beat competitors to market. Tony Jones, Chief Engineer at Andron Handling, demonstrates the use of SimSolid in the design development of its bespoke mechanical equipment. Seeking to assess the strength of the welded fabrication and vertical clamping arms for both lifting and clamping loads, Andron Handling utilized SimSolid to model the entire assembly of their bespoke handler design. They were able to include details such as sliding connections, clamping force on the pistons, and matching reactions on the cylinder bodies to ensure accuracy, and complete their simulation run in less than a minute, allowing multiple design iterations to be explored.