Improving Heating Boiler Acoustics at Viessmann: OptiStruct for Bead Pattern Optimization

Altair OptiStruct can be used to generate and optimize bead patterns for the effective design of sheet metal components. By using OptiStruct’s topography and shape optimization methods, sheet thicknesses can be reduced significantly, leading to both reduced material and a lower overall cost.

All Customer Stories

The success story of Lundbergs Pressgjuteri

The success story of Lundbergs Pressgjuteri

Mattias Melin tool manager from AB Lundbergs Pressgjuteri uses NovaFlow&Solid to predict future challenges.

Customer Stories
BMW Motorrad

BMW Motorrad

By automating the crankshaft modeling process using Altair SimLab, BMW Motorrad, the motorcycle division of BMW was able to significantly reduce their model creation time, and enable accuracy in budgetary forecasting and planning. As a result of making it an inhouse resource, they were able to gain

Customer Stories
Guerrilla Gravity

Guerrilla Gravity

For pioneering a new material application and technology without a road map, Guerrilla Gravity used Altair OptiStruct in the early design design phase. The result was the development of lightweight, high-performance bikes, that are 300% more impact resistant than other frames on the market that use

Customer Stories
Energy Finite Element Analysis by MES used to Control Interior Automotive Noise

Energy Finite Element Analysis by MES used to Control Interior Automotive Noise

EFEA uses a library of elements for modeling any physical system.

Customer Stories
Energy Finite Element Analysis by MES used to Control Interior Aircraft Noise

Energy Finite Element Analysis by MES used to Control Interior Aircraft Noise

With EFEA fewer elements are required compared to FEA, alternative designs can be evaluated rapidly enough in order to influence the design.

Customer Stories
From Die Design to Defect-Free Castings: Shiva Tool Tech Achieves 80% Time Reduction with Altair Inspire Cast

From Die Design to Defect-Free Castings: Shiva Tool Tech Achieves 80% Time Reduction with Altair Inspire Cast

Shiva Tool Tech is an automotive manufacturing focused, industrial powerhouse based in Pune, India. With over 25 years of experience in designing and manufacturing of gravity die casting (GDC), low-pressure die casting (LPDC), high-pressure die casting (HPDC) Dies, the company supports customers fro

Customer Stories
MDGo

MDGo

Statistics on fatal vehicle accidents show that victims most often do not die during or right after a crash, but in the hours and days afterwards, with research indicating that up to 44 percent of people who died in car crashes could possibly have been saved if first responders and hospitals had re

Customer Stories
Aeroswift

Aeroswift

The South African aviation manufacturing solutions provider Aerosud and the South African Council for Scientific and Industrial Research (CSIR) teamed up to launch a challenging 3D printing project, Aeroswift. Aeroswift collaborated with Altair to develop a methodology for designing large additively

Customer Stories
Using Altair Feko™ to reduce heating during MRI for Deep Brain Stimulation

Using Altair Feko™ to reduce heating during MRI for Deep Brain Stimulation

See how Altair Feko helped reduce heat during MRI procedures in DBS implants.

Customer Stories
GE’s Flow Simulator Increases Lifespan of BHGE’s Gas Turbine

GE’s Flow Simulator Increases Lifespan of BHGE’s Gas Turbine

The BHGE Secondary Flow & Heat Transfer team is dedicated to a large variety of analyses in the gas turbine design process. The scope is the estimation of the secondary air requirements for the entire turbine, including rotor, casing, flow path cooled components, bearings, etc.

Customer Stories
CONCEPT and RomaxDESIGNER drive more focused, streamlined and low-cost development of innovative products

CONCEPT and RomaxDESIGNER drive more focused, streamlined and low-cost development of innovative products

Hyundai uses CONCEPT by Romax to explore geometry, speed, rating and load dependencies, and carry out dynamic analysis.

Customer Stories
Mahindra Rise

Mahindra Rise

Mahindra & Mahindra is a global pioneer in the transportation business, including automotive, aerospace and the agribusiness. All these systems are required to be interlinked for a properly functioning parent system. Altair created a web business intelligence platform in engineering layers of analyt

Customer Stories
Automated First-time-right Support Generation for Laser Beam Melting with Additive Works’ Amphyon

Automated First-time-right Support Generation for Laser Beam Melting with Additive Works’ Amphyon

Additive Works will replace these extensive iterations by the use of process simulation and optimization to create a support structure first-time-right.

Customer Stories
Component level simulation of selective laser melting process − VTT Pipe

Component level simulation of selective laser melting process − VTT Pipe

VTT has been testing AM process simulation tools for inclusion in their design for AM workflow. Through these tests, Additive Works’ Amphyon software was found to predict component level geometric distortion values that corresponded well with measurements, give an indication of potential print failu

Customer Stories
Duratec

Duratec

Czech company Duratec Ltd. develops handmade bike frames using both aluminium and composite materials. For a recent project at Duratec presenting the latest approach in development of carbon fiber optimization of the bike frame, Altair HyperWorks was used for model creation in Altair HyperMesh, opti

Customer Stories
Top Use Case Lambda

Top Use Case Lambda

Optical and Illumination Design Software by Lambda Research Corporation

Customer Stories
Te Ahi Tupa - Hemo Gorge Sculpture

Te Ahi Tupa - Hemo Gorge Sculpture

Employing simulation-driven solutions to develop an iconic sculpture

Customer Stories
Marsden Cross Roof

Marsden Cross Roof

Overcoming “impossible” with advanced composite analysis and cost-driven optimization

Customer Stories
Griiip

Griiip

Israeli motorsport company Griiip has designed a new, fast and professional race car that combines efficiency in racing with a competitive purchase price and low running costs, to make it more affordable. By harnessing the power of data, Griiip has created the first smart connected race car – the G1

Customer Stories
Safran Seats

Safran Seats

Zodiac Seats (now Safran Seats) designs, certifies and assembles innovative, customizable and high-added-value products. For optimizing seat ergonomics to reduce passenger discomfort, Zodiac Seats France (ZSFR) employ Altair HyperWorks to develop biomechanical models which help with optimization of

Customer Stories
Serapid

Serapid

Serapid, the developer and manufacturer of the original Rigid Chain, designs and manufactures telescopic mechanical actuators for the horizontal and vertical movement of heavy loads. See how they use Altair SimSolid™ to aid in gravity loads of complete structure simulation.

Customer Stories
Serapid

Serapid

Serapid, the developer and manufacturer of the original Rigid Chain, designs and manufactures telescopic mechanical actuators for the horizontal and vertical movement of heavy loads. See how they use Altair SimSolid to aid in gravity loads of complete structure simulation.

Customer Stories
Roth McFarlane Hand and Upper Limb Centre

Roth McFarlane Hand and Upper Limb Centre

See how McFarlane Hand and Upper Limb Centre in London, Ontario is uses Altair SimSolid™ to evaluate the biomechanics of bone stresses.

Customer Stories
Roth McFarlane Hand and Upper Limb Centre

Roth McFarlane Hand and Upper Limb Centre

See how McFarlane Hand and Upper Limb Centre in London, Ontario is uses Altair SimSolid to evaluate the biomechanics of bone stresses.

Customer Stories
INTECH DMLS Achieves 27% Weight Reduction in 3D Printed Satellite Component using Altair Inspire™ and OptiStruct™

INTECH DMLS Achieves 27% Weight Reduction in 3D Printed Satellite Component using Altair Inspire™ and OptiStruct™

INTECH DMLS is playing the visionary role in the field of metal-based DMLS 3D printing in India since its inception in 2012. The company with this rich expertise in metallurgy and machining, established themselves rapidly as the leader of the Metal Additive Manufacturing industry in India. Sinteneer

Customer Stories
Pranav Vikas Achieves 17% Material Savings with Light Weight and Optimised Product Designs using Altair HyperWorks™ Solutions

Pranav Vikas Achieves 17% Material Savings with Light Weight and Optimised Product Designs using Altair HyperWorks™ Solutions

With over 2 decades of experience in manufacturing Aluminum Heat-exchangers such as Condensers, Evaporators, Heaters, Radiators, Oil Coolers, IHX and Roof AC units, Pranav Vikas (India) Private Limited (PVL) today is one of the largest and most diversified Heat-exchanger manufacturers in India. The

Customer Stories
Sharda Motors – Usage of Altair CAE Solution for Durability Analysis

Sharda Motors – Usage of Altair CAE Solution for Durability Analysis

Sharda Motor Industries Limited (SMIL) is the market leader in the country in the manufacturing of exhaust systems, catalytic converters, independent suspension systems, seat frames, seat covers (two and four wheelers), soft top canopies, and stamped part for white goods products. Their state-of-the

Customer Stories
Altair Inspire Form Helps Pragati Engineering Address Sheet Metal Formability and Inconsistent Thinning Issues While Reducing Physical Try-out Time by 50%

Altair Inspire Form Helps Pragati Engineering Address Sheet Metal Formability and Inconsistent Thinning Issues While Reducing Physical Try-out Time by 50%

Pragati Engineering, established in 2004, is one of the leading press tool design and manufacturing companies in India. The company has a national reach and successfully carries out projects riding on the robust shoulders of qualified and dynamic engineers from their Design department and Tool Room

Customer Stories
Imperial Auto has Successfully Validated the Contact Pressure for O-Ring by Contact Analysis using Altair OptiStruct™ Solution

Imperial Auto has Successfully Validated the Contact Pressure for O-Ring by Contact Analysis using Altair OptiStruct™ Solution

Established in the year 1969, Imperial Auto is one of the biggest integrated manufacturers of ‘Fluid Transmission Products (FTPs) in the world. The company has eight dedicated manufacturing and assembly plants in India. The grand vision of the company’s top management can be easily gauged from the s

Customer Stories
Morpheus Hotel

Morpheus Hotel

Morpheus is a newly built, contemporary style hotel in the City of Dreams in Cotai, Macau, that was commissioned to be built by world-renown architectural firm Zaha Hadid Architects in 2012.

Customer Stories
Lushan Primary School

Lushan Primary School

Tucked away in a remote location in the mountains, designed by ZHA, the Lushan primary school, when complete, will be an educational institute located 160 kilometers North-West of Nanchang, the capital of China’s Jiangxi province.

Customer Stories
Museo de Arte de Lima

Museo de Arte de Lima

In 2016, international architectural design firm Zaha Hadid Architects (ZHA) participated in a design competition launched by the internationally renowned Lima Art Museum (MALI) for the addition of a new building as a contemporary art wing of the museum.

Customer Stories
Andron Handling

Andron Handling

Andron Handling needed to assess the strength of the welded fabrication and vertical clamping arms for both lifting and clamping loads. In previous analysis of this type in Altair SimSolid™, they would have removed the wheels from the model and applied reaction forces at the bottom of each of the cl

Customer Stories
F.tech R&D North America

F.tech R&D North America

F.tech is a Tier-1 automotive systems supplier, headquartered in Japan. To help the CAE team at F.tech R&D North America overcome tedious challenges related to model build and geometry preparation for weld creation, Altair developed a customized solution. Developed using Altair’s Model Mesher Direct

Customer Stories
Integrated Design and Engineering Solutions

Integrated Design and Engineering Solutions

Melbourne-based Integrated Design and Engineering Solutions (IDES) provides full “systems-life-cycle” tailored engineering solutions to fulfill demanding defence requirements. For the LAND 121 Phase 3A project involving the procurement of Mercedes-Benz G-Wagon light trucks for the Australian Army, t

Customer Stories
Infinity BI powered by Altair SmartSight

Infinity BI powered by Altair SmartSight

Infinity.BI is a powerful business analytics module developed by Altair in partnership with Advanced Utility Systems for CIS Infinity® customers. Through a direct integration of Altair’s business intelligence software with the Infinity database schema, this business analytics module provides a r

Customer Stories
Fallbrook Technologies

Fallbrook Technologies

Traction-based, patented NuVinci® transmission is a continuously variable planetary (CVP) technology enabling performance and efficiency improvements for machines that use an engine, pump, motor, or geared transmission systems. Fallbrook Technologies has been working on improving oil flow inside the

Customer Stories
Case Study: Reliability-Based Stochastic Mobility Maps

Case Study: Reliability-Based Stochastic Mobility Maps

This case study shows how RAMDO software, when used in conjunction with computer simulations, provides improved mobility mapping. For efficient mission planning of troop movement, the Department of Defense needs reliable mobility maps. These maps are important for decision makers to plan routes

Customer Stories
Composites Driving Innovation: Development of a Sit-Ski as an Advanced Technology Demonstrator

Composites Driving Innovation: Development of a Sit-Ski as an Advanced Technology Demonstrator

The National Composites Centre (NCC), in collaboration with the Manufacturing Technology Centre (MTC), Advanced Manufacturing Research Centre (AMRC) and University of Warwick (WMG) worked on a collaborative project to develop a Cross-Catapult technology demonstrator; the Mono-Ski or Sit-ski, a devic

Customer Stories
Hussmann India Achieves Greater Simulation Accuracy with Altair AcuSolve™

Hussmann India Achieves Greater Simulation Accuracy with Altair AcuSolve™

Hussmann provides tailored food safety solutions designed to improve food quality and integrity. As the manufacturer of refrigerated display cases and systems, they have to maintain the highest performance and quality standards of the products they develop. Using Altair solutions helped them reduce

Customer Stories
Have a Question? If you need assistance beyond what is provided above, please contact us.

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!