Resource Library

Developing the Electric Drivetrain of Tomorrow - How Numerical Tools can Support Cooling and Lubrication System Development

Presentation by Johannes Winklinger, Energy & Fluid Expert at Magna Powertrain.

We are right at the beginning of the new mobility era with deep impact on the architecture of cars. Hybridization and electrification are the dominating topics in the automobile industry and consequently the power

ATC Presentations, Videos

Efficient and Accurate Material Engineering

The focus of the seminar is in introducing Altair Multiscale Designer, a framework for efficient and accurate multiscale modeling and simulation of composite and other heterogeneous materials. The development and validation of multiscale material ...

ATC Presentations, Videos

Concept Design - Get it Right From the Start

Presentation by Orlando Sadaro, Managing Director at Design 8.

If you are a designer then this presentation is right up your alley. Design seems to be an iterative process by nature. But what if we don't accept this default? What if we could get it right, from the start...? It would lead

ATC Presentations, Videos

Transient Analysis of Switched-Reluctance Motor Drive by FE Model Co-Simulation

Presentation by Lino Di Leonardo, University of L'Aquila.

This presentation showcases an analysis technique of electric motor drive based on transient simulation tools and embedded finite element motor modeling (co-simulation). A couple of software tools, Altair Flux and Activate, are emp

ATC Presentations, Videos

Multi-disciplinary System Simulation for Model-Based Development

Customers share their success stories illustrating how Altair Model-Based Development technology, and especially Altair Activate™, help them design better products faster. These customers give special attention to simulating multi-disciplinary pe...

ATC Presentations, Videos

Recent and Future Developments in Flux and FluxMotor

Presentation by Vincent Leconte, Senior Director of Global Business Development - EM Solution at Altair.

ATC Presentations, Videos

The Central Place of an Image Rendering Tool in an Architectural Conception Process

Presentation by Jean Thiriet, Thea Render.

Within the course of an architectural project, the meeting of client objectives, site constraints and the architect's ideas gradually shapes the future building.

At the heart of this creative process, a virtual model is used to bring toget

ATC Presentations, Videos

Model-Based Development with Altair

Presentation by Dr. Michael Hoffmann, Senior Vice President of Math & Systems at Altair.

Understand the motivation and vision for Altair’s Model-Based Development (MBD); the products involved; What’s New with the 2019 release of these products (including Basic Editions free for everyone!);

ATC Presentations, Videos

Modelization of a Remote Control for Miniature Circut Breaker using Activate/MotionSolve Co-simulation and Flux3D

Presentation by Remy Orban, Senior Mecatronic Designer at Schneider Electric.

A business opportunity required the adaptation of a Miniature Circuit Breaker remote control for a specific application. To comply with time to market requirement, multiphysics model was the best way to run a fe

ATC Presentations, Videos

MOTH2

Presentation by Sylwester Szymanski, MOTH2.

Sylwester Symanski discusses the MOTH2 project, a 3-wheeled vehicle, and the use of Inspire and OptiStruct for topology optimization.

ATC Presentations, Videos

Electromagnetic Design and Multiphysics Simulation for the Creation of Innovative Products

This technical session focuses on design in electrical engineering, and especially on low frequency electromagnetic simulation. Presentations can be viewed of the latest advances in the Altair simulation solutions - Flux and FluxMotor. Several com...

ATC Presentations, Videos

Simulation of a Gas Turbine and Generator System Under Steady State and Transient Conditions using Altair Activate

Presentation by Tomas Suguinoshita Quirino, GT2 Tecnologia.

This work presents the strategy created by GT2 Tecnologia to simulate the dynamics of a system comprised by a gas turbine coupled with an electrical generator, which is a typical schema for thermoelectrical powerplants. The mathe

ATC Presentations, Videos

Robotic Design of a Bushbot Chair

Presentation by Stephan Henrich, Robotikdesin und Architektur.

In this presentation, Stephan Henrich discusses several projects from different areas, including additive generative robotic fabrication and concept design.

ATC Presentations, Videos

New MIPSE Solver for Sensor Dimensioning

Presentation by Loic Rondot, Sensor Modeling Expert at Schneider Electric.

The current sensors modeling is a real numerical challenge for electromagnetic modeling software. Physics is well mastered, but the accuracy expected for the crosstalk computation is generally crippling to use a comm

ATC Presentations, Videos

Model Validation of a Seat Using Building Block Approach

Presentation by Sébastien Dépierre, Simulation Manager at Zodiac Seats France.

ATC Presentations, Videos

Multiscale Designer, A Multiscale Material Model Development Framework within HyperWorks

Presentation by Markku Palanterä, Director of Global Composites Business Development at Altair.

While many multiscale modeling frameworks exist, Multiscale Designer provides an unmatched combination of computational efficiency and predictive accuracy. Instead of implementing direct homoge

ATC Presentations, Videos

A CFD Approach for the Assessment of Fuel Tank Sloshing Noise

Presentation by Matthäus Jäger, CFD Simulation Engineer at Magna Steyr Fuel Tec.

Fuel tank sloshing noise is becoming increasingly noticable as engines, especially hybrid vehicles in electric mode, become quiter. The general requirement is to avoid all possible noise audiable for passengers

ATC Presentations, Videos

Fast and Reliable Software Interfaces to Speed up the Design of Electric Motors

Presentation by Luigi Rizzi, Technical Director at SPIN Applicazioni Magnetiche.

The car industry is undergoing an unprecedented shift, between electrification, car sharing and autonomous drive. Car makers are going to roll out several zero-emission models in the next few years and their

ATC Presentations, Videos

How to Design Die-Casting Parts with Altair Inspire Cast

Presentation by El Abidi Ahmed, CAE Manager - Senior Expert at U-Shin Group.

ATC Presentations, Videos

Impact Simulation, Safety Analysis and Occupant Protection Strategies in CAE

Crash & Safety Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

EV Thermal Analysis: 1D and 3D Model Integration for Cockpit and Batteries

Presentation by Massimiliana Carello, from Beond & Politecnico di Torino.

Nowadays automotive climate control systems are evolving at a rapid pace to meet the overall vehicle requirements. System evaluation is one of the major requests currently faced by the automotive manufacturers and t

ATC Presentations, Videos

Thermal and Impact Analysis of a Nuclear Flask Design

Presentation by Thomas Goulding, Mechanical Engineer at Assystem Energy and Infrastructure.

Nuclear transport flasks are used to store and transport nuclear waste material. When transported on public roads the flask must fulfill IAEA test requirements, which are designed to ensure that re

ATC Presentations, Videos

Use of Coupled Euler Lagrange Computational Method to Simulate Ditching Problems

Presentation by Bertrand Langrand, ONERA.

The communication concerns advanced numerical simulations of the transient fluid structure-interaction occurring during aircraft ditching. While the structural model used the Finite Element method, the Arbitrary Lagrangian-Eulerian approach was cons

ATC Presentations, Videos

Concept Design with Altair Inspire

Concept Design with Altair Inspire seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Vortex Bladeless: A New Way to Collect Energy from Wind

Presentation by Jose Viyeira, R&D Project Engineer at Vortex Bladeless.

Vortex Bladeless is developing a technology that extracts energy from the wind thank to Vortex Shedding and Vortex Induced Vibrations (VIV). Among others, the main fields of investigation we are working on are CFD, F

ATC Presentations, Videos

Form Follows Function - thyssenkrupp AG - Reinventing the Elevator Concept

Christian Kehrer presents on behalf of thyssenkrupp Elevator AG.

2017, thyssenkrupp Elevator AG has presented the MULTI concept, the world’s first rope-free elevator. The drive is ensured by a linear electromagnetic motor. To enable an economically feasible operation, it is necessary that

ATC Presentations, Videos

Development of Super Lightweight Pedal Brackets for Mazda Motor Corporation

Presentation by Hideyuki Inaba, Asahi Kasei.

Asahi Kasei fuses topology optimization technology and resin design technology, and developed superlight weight pedal bracket for Mazda Motor Corporation. Although the metal brake bracket for the current MX-5 is lightweight, we could propose a

ATC Presentations, Videos

Study Based on Flux3D FE Models on the Influence in Induction Motors

Presentation by Virgiliu Fireteanu, Professor at Politehnica University of Bucharest.

Study based on Flux3D FE models of the influence of stator short circuit, broken rotor bar, and rotor eccentricity on EM torque and rotor unbalanced force in induction motors

ATC Presentations, Videos

How to Feed Simulation Models with SmartWorks

Presentation by Oliver Breuer, Head of Software Engineering at FLUIDON.

There is a life for simulation models beyond the development process. Despite the large amount of data that can be collected from industrial facilities, the real benefit is behind colorful graphics and charts. To get

ATC Presentations, Videos

Aspects of Heterogeneous System Models in Industrial Applications

Presentation by Robert Höpler, Founder of SysOpt GmbH.

Heterogeneity can be present on various stages in system modelling and simulation. A system model is often called ‘multi-domain’, when different technical domains are present, such as hydraulics, mechanics, and control. When it comes

ATC Presentations, Videos

Applied Fluid Dynamics, Thermal Management and e-Drive Oiling

Learn how industry leaders are using Altair's CFD solutions to drive innovation in their products and to cope with complex projects.

In the first part thermal management of electric drivetrains is addressed with a multiphysics approach to combine high-fidelity fluid flow and thermal analys

ATC Presentations, Videos

Defining Positioning System for Heavy Lift Barge with AcuSolve

Presentation by Pawel Sadowski, Technical Support Manager at DES ART.

Even during building roads your approach may be different from the standard one. The nature often forces engineers to use their creativity and go beyond typical projects. This leads to some unique, futuristic structures or

ATC Presentations, Videos

Bridging the Gap Between Requirements and Analysis using ModelCenter with Altair Activate

Presentation by Ilya Tolchinsky, Phoenix Integration.

Phoenix Integration is a recently added member of the Altair Partner Alliance. Its product ModelCenter can create complex, fully automated simulation workflows and link these against Model Based Systems Engineering (MBSE) models. These

ATC Presentations, Videos

Saving Lives with Simulations: CEDREM Collaborates with DuPont on Ballistic Protection Solutions

Presentation by Edouard Ferry, CEDREM.

This study is a first step to study human body behavior during ballistic impacts and find injury thresholds. It combines many HyperWorks specificities such as composite modelling, hyper elastic material law, high speed impacts, equations of state, bi

ATC Presentations, Videos

Concept Modelling and Upfront Simulation

Design Review & Styling Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Altair Inspire Studio Technology Preview

Presentation by Francesco Di Giuseppe, Evolve Application Specialist at Altair.

Franceso Di Giuseppe discusses the future of solidThinking Evolve and Altair Inspire Studio.

ATC Presentations, Videos

Efficient Multidisciplinary Modeling of a Washing Machine Motor Duty Cycle

Presentation by Dr. Martin Ortega, Principal Design Engineer at Mabe.

This work presents a systematic process of the electromagnetic and thermal analysis of a washing machine single-phase capacitor-run induction motor during a full wash cycle. By utilizing an electromagnetic solver and a

ATC Presentations, Videos

Redesign and Topological Optimization of Transtibial Prosthesis by Reverse Engineering

Presentation by Eduardo Bajo, FEA Engineer at IDAERO.

Presentation of a project consisting of redesign with topology optimization of a transtibial leg prosthesis. It is a project in which the reverse engineering workflow has been followed, starting with 3D digitization of an amputated limb

ATC Presentations, Videos

Virtual Tryout - Digitalization for an Efficient Commissioning of Forming Tools

Presentation by Dr. Lars Penter, Head of Machine Technology at University of Dresden.

The life cycle of a forming tool consists of five major phases. It starts with the process and tool design followed by its assembly, the ramp-up and serial as well as spare part production. Due to every

ATC Presentations, Videos

Crash Simulation at Group PSA : Main Stakes and Perspectives

Presentation by Laurent Di Valentin, CAE Master Expert at PSA Group.

The constant improvements of the CAE process (from subsystem levels to the full car itself) and the development of optimization tools to reduce the mass and increase the performances led us to use the simulation as one v

ATC Presentations, Videos
274 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!