Resource Library

Fast and Reliable Software Interfaces to Speed up the Design of Electric Motors

Presentation by Luigi Rizzi, Technical Director at SPIN Applicazioni Magnetiche.

The car industry is undergoing an unprecedented shift, between electrification, car sharing and autonomous drive. Car makers are going to roll out several zero-emission models in the next few years and their

ATC Presentations, Videos

Transient Analysis of Switched-Reluctance Motor Drive by FE Model Co-Simulation

Presentation by Lino Di Leonardo, University of L'Aquila.

This presentation showcases an analysis technique of electric motor drive based on transient simulation tools and embedded finite element motor modeling (co-simulation). A couple of software tools, Altair Flux and Activate, are emp

ATC Presentations, Videos

Robotic Design of a Bushbot Chair

Presentation by Stephan Henrich, Robotikdesin und Architektur.

In this presentation, Stephan Henrich discusses several projects from different areas, including additive generative robotic fabrication and concept design.

ATC Presentations, Videos

Application of Altair HyperWorks and APA Products in Design of Gas-Turbine Engines

Presentation by Sergey Kutuev, Lyulka Design Bureau.

The presentation will demonstrate case studies performed by Lyulka Desigh Bureau enterprise with the application of Altair HyperWorks software products, such as HyperMesh and HyperView. Strength and optimization analysis carried out with

ATC Presentations, Videos

Virtual Tryout - Digitalization for an Efficient Commissioning of Forming Tools

Presentation by Dr. Lars Penter, Head of Machine Technology at University of Dresden.

The life cycle of a forming tool consists of five major phases. It starts with the process and tool design followed by its assembly, the ramp-up and serial as well as spare part production. Due to every

ATC Presentations, Videos

Efficient Multidisciplinary Modeling of a Washing Machine Motor Duty Cycle

Presentation by Dr. Martin Ortega, Principal Design Engineer at Mabe.

This work presents a systematic process of the electromagnetic and thermal analysis of a washing machine single-phase capacitor-run induction motor during a full wash cycle. By utilizing an electromagnetic solver and a

ATC Presentations, Videos

Form Follows Function - thyssenkrupp AG - Reinventing the Elevator Concept

Christian Kehrer presents on behalf of thyssenkrupp Elevator AG.

2017, thyssenkrupp Elevator AG has presented the MULTI concept, the world’s first rope-free elevator. The drive is ensured by a linear electromagnetic motor. To enable an economically feasible operation, it is necessary that

ATC Presentations, Videos

Thermal and Impact Analysis of a Nuclear Flask Design

Thomas Goulding, Senior Mechanical Engineer at Assystems presents at the UK ATC 2019. Nuclear transport flasks are used to store and transport nuclear waste material. When transported on public roads the flask must fulfil International Atomic Ener...

ATC Presentations

Simulation of a Gas Turbine and Generator System Under Steady State and Transient Conditions using Altair Activate

Presentation by Tomas Suguinoshita Quirino, GT2 Tecnologia.

This work presents the strategy created by GT2 Tecnologia to simulate the dynamics of a system comprised by a gas turbine coupled with an electrical generator, which is a typical schema for thermoelectrical powerplants. The mathe

ATC Presentations, Videos

Developing the Electric Drivetrain of Tomorrow - How Numerical Tools can Support Cooling and Lubrication System Development

Presentation by Johannes Winklinger, Energy & Fluid Expert at Magna Powertrain.

We are right at the beginning of the new mobility era with deep impact on the architecture of cars. Hybridization and electrification are the dominating topics in the automobile industry and consequently the power

ATC Presentations, Videos

The Central Place of an Image Rendering Tool in an Architectural Conception Process

Presentation by Jean Thiriet, Thea Render.

Within the course of an architectural project, the meeting of client objectives, site constraints and the architect's ideas gradually shapes the future building.

At the heart of this creative process, a virtual model is used to bring toget

ATC Presentations, Videos

Study Based on Flux3D FE Models on the Influence in Induction Motors

Presentation by Virgiliu Fireteanu, Professor at Politehnica University of Bucharest.

Study based on Flux3D FE models of the influence of stator short circuit, broken rotor bar, and rotor eccentricity on EM torque and rotor unbalanced force in induction motors

ATC Presentations, Videos

How to Feed Simulation Models with SmartWorks

Presentation by Oliver Breuer, Head of Software Engineering at FLUIDON.

There is a life for simulation models beyond the development process. Despite the large amount of data that can be collected from industrial facilities, the real benefit is behind colorful graphics and charts. To get

ATC Presentations, Videos

Modelization of a Remote Control for Miniature Circut Breaker using Activate/MotionSolve Co-simulation and Flux3D

Presentation by Remy Orban, Senior Mecatronic Designer at Schneider Electric.

A business opportunity required the adaptation of a Miniature Circuit Breaker remote control for a specific application. To comply with time to market requirement, multiphysics model was the best way to run a fe

ATC Presentations, Videos

Recent and Future Developments in Flux and FluxMotor

Presentation by Vincent Leconte, Senior Director of Global Business Development - EM Solution at Altair.

ATC Presentations, Videos

Truck Ride Comfort Analysis by Using Compose and MotionSolve

Ride comfort analysis modeling and ride comfort evaluation done in Altair Compose and Altair MotionSolve.

ATC Presentations

Optimization of Spacecraft Metallic Primary Structure with OptiStruct

Spacecraft primary structure is designed to react all the major loads imparted on a spacecraft. Inadequately designed or tested primary structure can result in structure failure during launch and endanger mission success. To maximize the useful pa...

ATC Presentations

Durability Workshop

On September 27th, OptiStruct users presented the latest capabilities and advancements in simulation-driven design methods for noise and vibration, durability and fatigue solutions. In addition, Altair experts showcased the unique OptiStruct devel...

ATC Presentations

To the Moon with Additive Manufacturing - Optimization, Space and Everything in Between

Yoram Malka, Head of Mechanical Engineering Department at Israel Aerospace Industry presents at the 2017 European ATC.

Increasing the performance of a system is a constant challenge engineers in all application areas face. This challenge specifically important in the aerospace world where weight

ATC Presentations, Videos

The Secret Lives of Models

Gael Salles, Director of Computer Aided Product Engineering Technology at Schneider Electric presents at the 2017 European ATC.

After a brief introduction of the changes in the Energy Landscape, an analysis of the life of models will be presented from the viewpoint of system engineering. Along wi

ATC Presentations, Videos

Airbus: When Simulation Turns into Reality

Dominique Moreau, Head of Airframe Technical Authority, Airbus presents at the 2017 European ATC.

This presentation will present the today’s state-of-the-art numerical simulation and the very latest progress Airbus did on the topic. The presentation will go through what remains to develop in the

ATC Presentations, Videos

Vehicle Concept and Structure of the New Opel Ampera-e

Dr. Hennig Holzmann and Dr. Boris Künkler of Adam Opel present at the 2017 European ATC.

The new Opel Ampera-e offers the customer a great car with the optimum balance regarding performance, package, mass and cost.

ATC Presentations, Videos

NEVS Uses Simulation Driven Innovation in Car Body Design

Dr. Lars Fredriksson, Business VP – Simulation Driven Innovation at Altair presenting on behalf of NEVS at the 2017 European ATC.

The automotive industry is experiencing ever increasing requirements on new vehicles from all directions. Still, development cycles must be shortened and development c

ATC Presentations, Video Testimonials

Artemis Racing’s use of Simulation Driven Design Technology in Pursuit of the 2017 America’s Cup

Peter Bentley, Design Team Member at Artemis Racing presents at the 2017 European ATC.

The increase in velocity enabled by advanced structural composites and on-board control systems has been a true game changer, and the future of sailing will be increasing dependent on simulation driven design.

ATC Presentations, Customer Stories, Videos

Industry 4.0 – How Digitalization Makes Weight & Balance Process More Agile and Connected

Kai Thräne, Manager Weight & Balance Research & Development at Airbus Helicopter presents at the 2017 European ATC.

In the context of Industry 4.0, most enterprise processes must become more digitized. A key element will be the evolution of the traditional product development toward a connected a

ATC Presentations, Videos

Design for High Performance Recreational Products

Pankaj Dubey, Country Head and Managing Director at Polaris India, presents at Converge 2016 in Bangalore, India.

ATC Presentations, Videos

Sunshine School Bus Design Story - Industrial Design for Automotive

Sathiya Seeland, Head of Styling for Product Design at Ashok Leyland, presents at Converge 2016 in Bangalore, India.

ATC Presentations, Videos

Design of an Axial Flux Machine: Simulation and Challenges

Altair’s low-frequency electromagnetic and thermal software, Flux™, offers a complete range of modeling tools able to take into account model specifications and streamline the design process.

Capitalizing on 36 years of innovation in the global context of design optimization and time-to-market r

ATC Presentations

Coupling Flux with OptiStruct for Acoustic Analysis

Altair’s low-frequency electromagnetic and thermal software, Flux™, offers a complete range of modeling tools able to take into account model specifications and streamline the design process.

Capitalizing on 36 years of innovation in the global context of design optimization and time-to-market r

ATC Presentations

Modeling the Induction Heating of Carbon Fiber Reinforced Thermoplastic

Altair’s low-frequency electromagnetic and thermal software, Flux™, offers a complete range of modeling tools able to take into account model specifications and streamline the design process.

Capitalizing on 36 years of innovation in the global context of design optimization and time-to-market r

ATC Presentations, Videos

Design of Interior Permanent Magnet Machines for Traction Application using Flux Modules

Altair’s low-frequency electromagnetic and thermal software, Flux™, offers a complete range of modeling tools able to take into account model specifications and streamline the design process.

Capitalizing on 36 years of innovation in the global context of design optimization and time-to-market r

ATC Presentations

Bend-It – Rethinking Customized Orthopaedic Devices Using Additive Manufacturing

Dustin Ahrendt and Felix Schmitt from Technische Universitat Dresden present at Converge 2017 in Essen, Germany.

ATC Presentations, Videos

A Tooling Revolution for Plastic Injection Molding

Stefan de Groot, Technologist Additive Manufacturing at PROTIQ, presents at Converge 2017 in Essen, Germany

ATC Presentations, Videos

Taming Smart Materials to Behave

Doris Sung, Founder of DOSU Studio Architecture, presents at Converge 2017 in Los Angeles, California.

ATC Presentations, Videos

Design for the Future: 5 Trends You Need to Know

Christine Outram, Chief Product Officer at Veritas Prep, presents at Converge 2017 in Los Angeles, California.

ATC Presentations, Videos

Master Class: How to Design for Additive Manufacturing

This Master Class held at Converge 2017 in Essen Germany, presents the making of the 3iPRINT Project, which was a joint effort from csi entwicklungstechnik, APWORKS and EOS.

ATC Presentations, Videos

Design Research Experiences at ZH CoDe

Filippo Nasetti, Senior Associate at Zaha Hadid, presents at Converge 2017 in Essen, Germany.

ATC Presentations, Videos

Additive Manufacturing Design

Jason Lopes, Production Development Engineer at Carbon, presents at Converge 2017 in Los Angeles, California.

ATC Presentations, Videos

High Performance, Dynamism and Autonomy for Humans

Greg Lynn, Principal at FORM, presents at Converge 2017 in Los Angeles, California.

ATC Presentations, Videos

Mega Data, Mega Structure, Mega City

Michael Peng, Technical Director and Senior Associate at Gensler, presents at Converge 2017 in Los Angeles, California.

ATC Presentations, Videos
322 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!