Resource Library

mmWave Substrate Lens Antenna for Wire Communications

Wu et. al. [1] proposed designs for both single and multi-beam mmWave circularly polarized substrate lens antennas in 2001. This white
paper demonstrates these designs via FEKO modeling.

Technical Papers

Modeling & Analysis of Anechoic Chambers

A white paper demonstrating how FEKO models were used during the design stages of an anechoic chamber that operates in UHF ranges.

Technical Papers

Resource Scaling for Antenna Placement Modeling on a SAAB JAS-39 Gripen Aircraft

This white paper demonstrates how resource requirements scale for the computational electromagnetic modeling of a modern fighter aircraft when the frequency increases. It also demonstrates how different simulation methods may be applied and how th...

Technical Papers

Combining Near-Field Measurement and Simulation for EMC Radiation Analysis

Electronic components are required to comply with the global EMC regulations to ensure failure free operation. Currently, EMC
measurements in certified institutes are mandatory to certify performance complies with regulations.This paper describes a practical method of combining near-field measureme

Technical Papers

Antenna Design Methodology for Smartwatch Applications

Smart devices have touched and enhanced all aspects of our lives, from the way we conduct business to the way we relax at the end of the day. Designing antennas for wearble devices presents a unique set of challenges. In this technical article f...

Articles, Technical Papers

A Thin, Low-Profile Antenna Using a Novel High Impedance Ground Plane

The size of the antenna for a given application does not depend purely on the technology but on the laws of physics where the antenna size
with respect to the wavelength has the predominant influence on the radiation characteristics.

Technical Papers

Cross-Coupling between a 3G Transmitter & a Cable Bundle

This white paper demonstrates how the cable modeling interface in FEKO was used to compute cross-coupling effects between a cable bundle and 3G antenna mounted on a vehicle.

Technical Papers

Design and Analysis of a Proximity Fuse Antenna for an Air Defence Missile

This white paper is an example of how Antenna Magus can be used to generate antennas for antenna placement studies in FEKO.

Technical Papers

mmWave Axial Choke Horn Antenna with Lens

Millimeter wave (mmWave) antennas operate in the band of frequencies where the wavelength is between 10mm and 1mm. The frequency
range for mmWave application is thus constrained to be greater than 30 GHz, but less than 300 GHz. Various applications exist in
this frequency range, including wide ban

Technical Papers

Numerical Methods in FEKO

FEKO offers a wide spectrum of numerical methods and hybridizations, each suitable to a specific range of applications. Hybridization of numerical methods allows large and complex EM problems to be solved.

Technical Papers

Advanced Radar Cross Section (RCS) Visualization with POSTFEKO and Lua Scripting

This white paper demonstrates how Lua scripts in POSTFEKO may be used to produce advanced visualizations of RCS data that was
computed in FEKO.

Technical Papers

ESAComp meets challenging marine applications

In this article we learn about ESAComp's role in the design-development of a carbon composite RIB "Rigid-hulled Inflatable Boat", the latest project from Dr. Luca Olivari, a naval architect, founder and owner of the Italian company Olivari Composi...

Technical Papers

Pressure vessels: The composite solution from ComposicaD and ESAComp

With composite pressure vessels foreseen as a significant industrial growth sector, Mike Skinner, from Seifert and Skinner & Associates, talks us through their approach and how the composite solution offered by ComposicaD and ESAComp provides effi...

Technical Papers


This paper presents a newly developed analysis and design module for adhesive bonded joints implemented in ESAComp, software for analysis and design of composite laminates and laminated structures.

Technical Papers

Anisogrid Payload Adaptor Structure For Vega Launcher

In the framework of a development project promoted by the European Space Agency (ESA/ESTEC), Airbus Defence & Space (EADS CASA Espacio, ECE) has designed, manufactured and tested a technology demonstrator representative of the payload adaptor (PLA...

Technical Papers

Modern organic architecture with ESAComp

ESAComp software used for the preliminary laminate analysis, to evaluate the structural component behaviour along with the development of the joint system in the Varna Regional Library

Technical Papers

Horn-Fed Reflector Antenna

A horn-fed parabolic reflector is modeled in FEKO to determine its radiation pattern.

Technical Papers

Considering large deflections in panels - ESAComp 4.4 introduces nonlinear analysis

In composite panels with large support spans, deflections are primarily due to bending. Out-of-plane shear can also play a significant role in sandwich structures. While these deformation types are considered in the typically used linear static an...

Technical Papers

At the origins of delamination stresses - Free edge analysis gives insight

When you make a tensile test for [±45/0/90]s and [90/±45/0]s laminates you may observe different failure strengths. This may seem first surprising since the laminates are basically the same - only the stacking sequence is different, which should n...

Technical Papers
299 Results