Resource Library

Top Use Case Lambda

Optical and Illumination Design Software by Lambda Research Corporation

Customer Stories

Gulplug

French startup Gulplug, located in Grenoble, France, has set out to revolutionize plug and charging technology used in today's electric and hybrid vehicles. To create new products and to drive innovation in the market, Gulplug is using Altair Flux...

Customer Stories, Customer Testimonials

Roth McFarlane Hand and Upper Limb Centre

See how McFarlane Hand and Upper Limb Centre in London, Ontario is uses Altair SimSolid™ to evaluate the biomechanics of bone stresses.

Customer Stories

Lushan Primary School

Tucked away in a remote location in the mountains, designed by ZHA, the Lushan primary school, when complete, will be an educational institute located 160 kilometers North-West of Nanchang, the capital of China’s Jiangxi province.

Customer Stories

Andron Handling

Andron Handling needed to assess the strength of the welded fabrication and vertical clamping arms for both lifting and clamping loads. In previous analysis of this type in Altair SimSolid™, they would have removed the wheels from the model and ap...

Customer Stories

Hussmann India Achieves Greater Simulation Accuracy with Altair AcuSolve™

Hussmann provides tailored food safety solutions designed to improve food quality and integrity. As the manufacturer of refrigerated display cases and systems, they have to maintain the highest performance and quality standards of the products the...

Customer Stories

Optimization of Photovoltaic (PV) Mounting Structures – Savings on Material and Cost

Photovoltaic specialist Thesan, a subsidiary of global manufacturer Savio S.p.A, manufactures, and distributes mounting structures, consisting of a so-called Purlin, a Rafter, and a Pole (and Hat), designed to withstand potentially occurring loads...

Customer Stories

No more Gone with the Wind – Pedestrian Comfort Improvements on Quinta Torre with AcuSolve Computational Fluid Dynamics

Officially known as the Caleido project, the Fifth Tower in Madrid is owned by Inmobiliaria Espacio, a company that, among other services, deals with infrastructure and construction for all types of buildings.

Customer Stories

Real-Time Foundation Monitoring for Omnifor

In the western part of the Netherlands, the soil has insufficient bearing capacity to allow for the construction of buildings and houses. To overcome this issue, buildings in this area have been built on timber pile foundations. These foundations ...

Customer Stories

Surrogate Models for Antenna Placement on Large Platforms

The RF Engineering group at the Institute of High Performance Computing (IHPC), develops advanced computational electromagnetics and multiphysics algorithms and tools, leveraging vast know-how in EMC for a wide range of applications. Typical chall...

Customer Stories

Ankers

Ankers performed co-simulation using a combined multibody and brake systems model in MotionView and Activate to generate more accurate results to analyze thermal and other effects on braking.

Customer Stories

Faraone

Faraone accelerates the design approach for lighter and stiffer architectural components with premium topology optimization technology.

Customer Stories

Triton Bikes

Triton Bikes utilized Altair Inspire to Increase performance, decrease the overall weight, and simplify manufacturability of a 3D printed custom bike rear yoke.

Customer Stories

HyperWorks Enables Ingeniacity to Reduce Mass of Sailing Yacht Composite Bowsprit by 65%

Altair's HyperWorks Suite provided the pre-processing, optimization and FE-solving tools to help create a new bowsprit design that was 34kg lighter than the previous model

Customer Stories

Top Use Cases: SimData Manager

Presentation introducing a few of the top use cases for the simulation data management software, SimData Manager.

Customer Stories

HyperWorks Becomes Part of Mechanical Engineering Curriculum at Dalhousie University

As a key industry tool, HyperWorks becomes part of the Curriculum, providing hands-on training to Mechanical Engineering Students at Dal

Customer Stories

Robot Bike Co.

Developing a Fully Customizable, Additively Manufactured Mountain Bike

Customer Stories

Composite Rotor Blade Analysis using Altair HyperWorks

As part of a senior design project – the design and analysis of a coaxial rotor craft –
Christopher Van Damme, at the time of the project senior undergraduate student within the
department of Engineering Mechanics at the University of Wisconsin-Madison, had to analyze
a composite made helicopter

Customer Stories

SOGECLAIR Aerospace Employs HyperWorks to Optimize Additively Manufactured Aircraft Components: Topology optimization of a large engine pylon structure

To find new development and manufacturing approach to reduce weight while ensuring safety, HyperWorks offers SOGECLAIR Aerospace an innovative, streamlined development environment with more design freedom, faster development cycles, and lower cost...

Customer Stories

Student Racing Team from Politecnico di Torino uses HyperWorks to Improve Weight, Manufacturability, and the Performance of Race Car

Formula SAE is a competition between university student teams, organized by the Society of Automotive Engineers. Each student team has to design, build, test, and promote a prototype, which is then evaluated in eight types of tests, ranging from p...

Customer Stories

Indian Engineering Institute CoEP Establishes CAE Optimization Center Employing Altair HyperWorks

This success story illustrates how a reputed engineering institute of national acclaim has set-up a CAE - Optimization Lab, equipped with Altair HyperWorks CAE tools, to expose their students to the latest technologies in product design, analysis, and optimization.
Within the range of the CAE - Opt

Customer Stories

Haier Redesigns Air Conditioners and Packaging with Altair HyperWorks to Eliminate Drop Damage

Haier Group is one of the world’s largest manufacturers of home appliances and consumer electronics. The company is the leader of its industry in China, where it is headquartered.

Haier ships its products all across the globe and in more than 100 countries, so well designed product packag

Customer Stories

NASA Develops Wireless Sensors to Detect Lightning Strike Damage to Composite Aircraft

Computational electromagnetic software enables a team of researchers at NASA’s Langley Research Center to develop wireless resonant sensors that can measure and mitigate lightning strike damage to composite aircraft.

By Beverly A. Beckert
Concept To Reality Winter/ Spring 2015

Customer Stories

Aeroelastic Investigation of the Sandia 100m Blade Using Computational Fluid Dynamics

Recent trends in wind power technology are focusing on increasing power output through an increase in rotor diameter. As the rotor diameter increases, aeroelastic effects become increasingly important in the design of an efficient blade.

Customer Stories

University of Nottingham Case Study: PBS Works Suite

The University of Nottingham chose the PBS Works suite as their integrated workload management solution for their HPC system comprising over 170 machines. The solution includes PBS Professional, PBS Analytics and Compute Manager.

Customer Stories

Scania Customer Story

Squeak and rattle phenomena are studied in the automotive industry in an attempt to reduce the cabin noise and as a result, give a better ride quality and comfort to occupants. In the case of Scania’s Cabin Development Department, this kind of sim...

Customer Stories, Videos

Using Analysis to Innovate with New Materials

Analysis and optimization tools enable Samsung engineers to reduce the cost of appliances without sacrificing performance.

By Beverly A. Beckert
Concept to Reality Winter 2013 Subscribe to C2R Magazine

Customer Stories

HyperWorks Optimization Capabilities Integrated into Packaging Design Process Help Unilever Cut Costs and Development Time

Unilever reduced the time required for
simulation and significantly lowered costs
by working with Altair HyperWorks suite
of computer-aided engineering tools.

Customer Stories

Polaris Reduces Weight of Snowmobile Structures Up to 40% with solidThinking Inspire and OptiStruct

Polaris, based in Roseau, Minn., is a
renowned manufacturer of snowmobiles,
and its Snowmobile Chassis Structures
Group is engaged in design and testing that supports three different platform teams with chassis solutions for each set of requirements. Computer-based design and finite element (FE)

Customer Stories

HyperWorks Enables Global Appliance Manufacturer to Use New Material for Stronger, Lower-Cost Product

To qualitatively and quantitatively analyze the stress on the door cover during thermal expansion and contraction, the engineers used HyperMesh, a high-performance finite element pre-processor and RADIOSS, a modern structural analysis and optimiza...

Customer Stories

Intel AcuSolve Case Study: Analyzing Complex Designs Faster

Working in collaboration with Intel’s technical support team and utilizing key Intel® software development tools, Altair was able to improve performance, scalability, and time-to-results for AcuSolve, Altair’s leading CFD flow solver.

Customer Stories

Right-Sizing PLM Software Investments

An Indian motorcycle manufacturer leverages business analytics to optimize software usage and procurement decisions.

By Beverly A. Beckert
Concept To Reality Summer / Fall 2012 Subscribe to C2R Magazine

Customer Stories

Unilever

Optimizing Packaging Designs & Reducing Prototype Costs

To remain at the forefront of innovation within the male grooming market, Unilever, constantly looks for ways to differentiate their products from competitor offerings. For the Lynx (Axe) brand, Unilever needed to adopt a simu

Customer Stories

Getting the Right Design, Getting the Design Right

Conceptual design technologies impact product development.

By Alessandro Mazzardo
Concept To Reality Spring/Summer 2010

Concept to Reality, Customer Stories

Improving Efficiency and Accuracy at Eaton Aerospace with HyperWorks

The Hydraulic Systems Division of
Eaton’s Aerospace Group designs hydraulic
components and systems on many of the
world’s military and commercial aircraft
in the skies today. Eaton uses Altair HyperWorks within it's simulation processes to improve solution efficiency and accuracy.

Customer Stories

WJH Engineering Uses Altair HyperMesh™ to Cut Physical Testing Costs of Medical Devices by 95%

WJH Engineering Consultants provides finite-element analysis and design for many of America’s largest developers of medical devices. Company President, Jim Harrison, works directly with engineers at companies producing medical devices and with do...

Customer Stories

SmartCore optimizes fleet management at Boyaca

Boyacá has been handling the daily delivery of newspapers and magazines in Spain for more than 35 years. Fulfillment of time schedules is essential for customer satisfaction and late deliveries can result in additional costs. Boyacá needed to have...

Customer Stories

Rotorcraft Design Takes Flight

Optimization tools enable Boeing to balance form and function in the development of advanced aircraft.

Customer Stories

Putting Simulation Muscle Behind a Sporty Concept Car

Optimization technology delivers innovative suspension design for Alfa Romeo's sleek concept car.

Customer Stories

PBS Professional at TRW Automotive: A Standard Solution for European Design Centers

As a global technology company, TRW Automotive touches most of us in ways we're unaware of. And when we drive, it is practically a certainty that a TRW system with brakes, airbags, seat belts, or steering is part of the experience. A Tier One auto...

Customer Stories
361 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!