Resource Library

Training - Systematic approach for NVH Problem solving Techniques

A systematic approach for NVH Problem solving techniques - 25/05/2020

Webinars

Reduction of Moving Masses – Streamlined Design for Improved Engine Performance

To expand the rpm range of a motorcycle engine, a new type of rocker arm with lower inertia was needed at KTM. The new rocker arm was required to have the same, or better stiffness and deformation level as the previous design. KTM used Altair Hype...

Customer Stories

Training - Composite Design and Analysis Using HyperMesh-OptiStruct

Composite Design and Analysis Using HyperMesh-OptiStruct

Webinars

Training- Improve CFD Pre-Processing Using HyperMesh : SimLab

This is an introductory course for using HyperMesh CFD to create and set up finite element (CFD) models for CFD analysis. A combination of lectures and exercises will familiarize students with the HyperMesh environment, process, and suite of tools...

Webinars

Training - Lead Time reduction in report generation using Hyperview Report

This session explains how HyperView Report tool can be helpful in standardization and reducing lead time in report creation.

Webinars

Training: Model Design Variations In Mesh Morphing Using HyperWorks New User Experience

The tool allows you to alter finite element models while keeping mesh distortions to a minimum.
HyperMorph can be used to:
• Change the profile and the dimensions of your mesh
• Map an existing mesh onto a new geometry, and
• Create shape variables that can be used for optimization

Webinars

Quilted Stratum Design: Optimization Software for Preform Tailoring

New composite processes open new degrees of freedom that bridge the step between lay-up optimization and mass production. Design methods must include process constraints and cost evaluation to use at best the composite material and therefore answe...

Webinars

Training- Lead Time reduction in report generation using Hyperview Report

This session focuses primarily to illustrate how Altair Compose can act as a catalyst in CAE simulations, especially in post-processing aspects. Cases are demonstrated in Compose using its built-in capabilities like CAE readers, optimization, adva...

Webinars

Training- Post Processing For NVH - HyperView:NVD

Post Processing For NVH - HyperView:NVD

Webinars

Direct Mid Meshing forTraining: Complex 2D Components Using HyperWorks New User Experience

The session will take you through the new workflow introduced to HyperMesh enables efficient mesh generation of thin solid parts without the need to create a mid-surface. The thickness of the original part can be mapped automatically on to the re...

Videos

Building an Efficient CAE Simulation Platform at the Pan Asia Automotive Technology Center (PATAC)

PATAC needed to develop an efficient CAE simulation management platform to accommodate
their changing needs and accelerate digital growth.

Customer Stories

New Features in Altair HyperMesh

Series of new feature videos for Altair HyperMesh within the Altair HyperWorks 2019 release

Videos

Enabling EV Excellence – Simulation Helps Rimac Improve Structural Design of Innovative Hypercar

Rimac Automobili’s main challenge has been to design a monocoque as a single carbon fiber part with an unprecedented size. Hence, in the development of the monocoque, the main topic to manage was the material, a lightweight, carbon fiber reinforce...

Customer Stories

Accelerating Complex Analysis Processes from HyperMesh to OptiStruct

Supported by the streamlined, intuitive workflows in HyperMesh, running nonlinear analysis in OptiStruct is easier and more powerful than ever. Nonlinear explicit analysis is now supported, enabling simulation of drop tests, impact analysis, and m...

Webinars

Altair HyperMesh New Feature Overview

View a high level overview of the new features available within HyperMesh 2019.

New Features, Videos

Altair HyperStudy New Feature Overview

View a high level overview of the new features available within HyperMesh 2019.

New Features, Videos

What's New in HyperMesh 2019 - Meshing and Geometry

Learn about the new features and workflows available in HyperMesh 2019 for meshing and geometry

Webinars

Increasing Your Productivity for CFD Model Build

This webinar, presented jointly between Altair and the UK's leading CFD consultancy, TotalSim, demonstrated how the latest model build technologies can drastically accelerate your external aerodynamics programmes, freeing up Engineers' time to pro...

Webinars

Introduction to HyperMesh

Altair HyperMesh is a high-performance finite element pre-processor to prepare even the largest models, starting from import of CAD geometry to exporting an analysis run for various disciplines.

Videos

Altair HyperMesh Batchmesher Enhancements

Many improvements have been made to batchmesher in the version 2019 release. Learn more about the new enhancements available in this release.

New Features, Videos

CADdoctor Case Study: Arkal Automotive

Arkal Automotive Optimizes FEA Data Creation Workflow with HyperMesh and CADdoctor.

Customer Stories

Detailed Nonlinear Model for the Analysis of a Wind Turbine Pitch Bearing

Presentation by Aitor Fernandez, Mechanical Engineer at IK4-Tekniker.

The mechanical behavior and failure mechanisms of a wind turbine pitch bearing are very different from those of other bearings types designed for traditional applications. On the one hand, there is the effect of the low r

ATC Presentations, Videos

Cedrem Showcase Video

5-minute introductory video describing how KTex and HUByx by Cedrem offer dynamism and creativity in developing new numerical tools and new composite materials that lead to a service at the cutting edge of innovation.

Video Testimonials

Faster, More Efficient Modeling With Next-Gen HyperMesh

The next generation HyperWorks experience was created to enable teams to move from physics to physics, domain to domain or even create reports without ever leaving their simulation model. Every tool in the suite delivers a solution-specific workfl...

Webinars

HyperMesh and Custom Export Template Streamline CFD Analysis in Research Projects at Arizona State University

Integrative Simulations & Computational Fluids Lab researchers from SEMTE (School for Engineering of Matter Transport and Energy) at the Arizona State University (ASU) wanted to use the commercial code HyperMesh as a general preprocessor to mesh c...

Customer Stories

Faster Concept Modeling with HyperWorks X

In this webinar, we address challenges common to conceptual modeling engineers and the powerful new time-saving features and workflows available in the HyperWorks X user experience.

Webinars

Altair HyperMesh Datasheet

Altair HyperMesh is a high-performance finite-element pre-processor that provides a highly interactive and visual environment to analyze product design performance. With the broadest set of direct interfaces to commercial CAD and CAE systems and a...

Datasheets

The Successful Application of HyperWorks at Lenovo

To increase efficiency, improve the quality of meshing and shorten CAE simulation time, Lenovo engineers needed to own a powerful pre-processing tool, one that would really meet the demands of scientific research and engineering innovation. For th...

Customer Stories

Altair HyperMesh Crash & Safety - Dummy Pre-Simulation

Dummy pre-simulation with the cable method can be performed using the Dummy Pre-Simulation tool.

New Features, Videos

Altair HyperMesh Crash & Safety - Mechanism Tool

Automatically extract bodies and joints to create a mechanism of the selected Finite Element model using the Mechanism Extraction tool.

New Features, Videos

Altair HyperMesh CAD Interfaces and New Capabilities

Many improvements have been made to the CAD interface in the version 2019 release. Learn more about the new enhancements available in this release.

New Features, Videos

Optimizing CAE Data Preparation Processes Using CADdoctor

As the use of 3D data throughout the produce lifecycle broadens, it is ever more essential to prepare high-quality 3D CAD geometry models to streamline the entire simulation process. CADdoctor is a tool to streamline CAD geometry preparation to ma...

Webinars

Matereality-HyperMesh Connectivity: Create CAE Master Material Files for Use in HyperMesh

This webinar will show how Matereality’s Workgroup Material DatabasePro on Altair’s HyperWorks platform brings a hurdle-free interaction with materials information for design engineers. Please note: You will need to login to Altair Connect to view...

Webinars

Midsurfacing and Meshing in HyperWorks X

A beam example of how the new Altair HyperWorks X workflows allow to quickly extract midsurfaces, generate a mesh and apply morphing.

Videos

Data discovery and how to seamlessly search, identify, and move material properties data using Total Materia and HyperMesh

An insightful introduction to Total Materia and its recent integration into Altair’s HyperMesh which allows access to the world’s most comprehensive materials database direct from the HyperMesh environment. This webinar will put data discovery in ...

Webinars

Optimization of Material Properties Workflow and Materials Selection in CAE

As the leading provider of materials reference data Key to Metals AG will present the key aspects of how the Total Materia database can support and improve the accuracy of simulation results whilst reducing cost, optimizing material usage and elim...

Webinars

How to Accurately Assess Tug and Barge Operations Using ProteusDS, ShipMo3D, and HyperWorks

This webinar will show how accurate models of vessels and towlines can be built with ProteusDS and ShipMo3D. It will also discuss the development of a new thruster and controller model in ProteusDS. Lastly, this webinar will demonstrate exciting n...

Webinars

HyperWorks for Aerospace: Model Build Webinar

This webinar covers an overview of HyperMesh 14.0 and present live demos, including all the latest functionality of the 14.0.120 release.

Webinars

Meshing the Human Lumbar Spine

HyperWorks customer Jeff Harris from NuVasive has used HyperMesh to solid hybrid mesh consecutive human vertebrae and discs from a patient bone scan. The meshing, set up in Hypermesh, is simulated using Ansys for motion limits, stiffness, and disc...

ATC Presentations

New Generation User Experience of HyperWorks

New Generation User Experience of HyperWorks
Michael Dambach Sr. Vice President, HyperWorks Program Management, Altair

ATC Presentations
236 Results