Resource Library

Generation of Antenna Array Excitation

See how Altair Compose can be used for the automatic generation of antenna array excitations. You can seamlessly perform the necessary calculations, data formatting and output for use with Altair Feko.

Videos

SimLab Tutorials - Linear Transient Heat Transfer Analysis

Split faces using chaining edges; create a transient heat transfer solution; create material with thermal properties; define initial conditions; apply thermal loads such as time dependent heat flux and convection; define solver settings and analyze

Training Materials, Videos

SimLab Tutorials - Post-Processing Optimization Results

View and post-process results of topology optimization

Training Materials, Videos

SimLab Tutorials - Suspension Insulator

Create electrostatics solution using flux solver; create dielectric material by atributing a relative permitivity; define region physics such as air, dielectric and perfect conductor; create tangential field symmetry plane; compute and review the ...

Training Materials, Videos

SimLab Tutorials - Non Linear static Analysis_flex plate

Apply symmetry constraints; apply enforced displacement constraint; create 3d bolt with pretension; create advanced contacts; create loadcase; modify solution parameters; solve and review the results

Training Materials, Videos

SimLab Tutorials - Analysis 1D Pretension and Bearing Pressure

Define material and properties; define quickly 1D bolts with pretension; defining loads and constraints; define contacts; export solver deck; run a linear static analysis with OptiStruct; visualize entities

Training Materials, Videos

SimLab Tutorials - Logo removal

Remove a logo from meshed bodies

Training Materials, Videos

SimLab Tutorials - Region Definition by Two Planar Faces

Create region mesh control based on 2 planar faces; Edit the dimensions of the cuboid region by changing the values, scaling and moving the region; Create region mesh control based on 2 intersecting planes

Training Materials, Videos

SimLab Tutorials - Volume Meshing with Layers_Housing

Request locally a given amount of tet layers through thin walls; Create a volume mesh with Tet10 from an existing, encolsed Tri6 mesh; Auto cleanup a volume mesh based on different quality criteria.

Training Materials, Videos

SimLab Tutorials - Normal Mode Analysis of an Assembly

Create matching faces through assembly; assign load, mass and spring connection; assign material and properties; execute the analysis and verify results

Training Materials, Videos

Solar Car Challenge: Pushing the Boundaries using Composites Optimization

Raphael Gerard, Design Engineer at Gurit, discusses the use of composite optimization with Altair OptiStruct to reduce weight and increase performance in a solar car challenge.

Download the Presenta

Videos

ESRD StressCheck Aero Wing Flap Video

ESRD StressCheck Aero Wing Flap Fitting Use Case

Videos

Showcase Video Tech-X

Tech-X Software for Electromagnetics and Plasma

Videos

Providing Designers Easy Access to Powerful Simulation Tools

Brompton Bicycle discuss the benefits they have seen from moving away from simulation in their CAD system to a more powerful and flexible system from Altair.

Customer Testimonials

Optimization Driven Motor Design - Processes and Methodology

Presentation by Lars Fredriksson, Business VP - Simulation Driven Innovation at Altair.

This presentation offers insight how Altair has approached the challenge of improving the total design balance in E-motor development. The presented study has been executed with active support of Porsche AG.

ATC Presentations, Videos

Model-Based Development with Altair - Introduction and E-Mobility Use Cases Systems Simulation

Presentation by Andy Dyer, Senior Tech Specialist at Altair.

In this presentation, we'll take a look at a few examples of e-Mobility systems models built with Altair Activate and Compose and integrated with other tools like Flux, for electromagnetic simulation for electrical machines (mot

ATC Presentations, Videos

Zaha Hadid Presents Innovation in AEC

Eddie Can, Senior Associate at Zaha Hadid Architects, keynote presentation at the 2018 Global ATC in Paris, France.

During his speech Mr. Can will focus on the relationship between highly complex design documents and construction technique that minimize cost while working on a custom and double c

ATC Presentations, Videos

A Concept-to-Digital-Twin Product Development Demonstration

Presentation by Nic Minnaar, Application Engineer at Altair.

Simulation technology has been a powerful tool in the arsenal of product developers because the technology buffers designers from the consequences of the physical world. The designers have thus been enabled to virtually explore

ATC Presentations, Videos

Test Twins - Digital Twins for the Product Development Process

Presentation by Alvaro Everlet, VP Business Development at Altair.

Digital Twins of test equipment help align physical simulation (lab testing) and virtual simulation (CAE). While typical CAE models make assumptions about the physical simulation initial conditions and the operational envi

ATC Presentations, Videos

Motorcycle Crankshaft Modeling with SimLab at BMW Motorrad

Presentation by Roland Zettler, Development Engineer at BMW Motorrrad, Simulation and Predevelopment Power Train.

Motorcycle crankshaft simulation uses a detailed FE-mesh for structural and fatigue analysis. Due to long time durations for FE meshing, the idea was to establish a process fo

ATC Presentations, Videos

Electromagnetic Design and Multiphysics Simulation for the Creation of Innovative Products

This technical session focuses on design in electrical engineering, and especially on low frequency electromagnetic simulation. Presentations can be viewed of the latest advances in the Altair simulation solutions - Flux and FluxMotor. Several com...

ATC Presentations, Videos

Multi-disciplinary System Simulation for Model-Based Development

Customers share their success stories illustrating how Altair Model-Based Development technology, and especially Altair Activate™, help them design better products faster. These customers give special attention to simulating multi-disciplinary pe...

ATC Presentations, Videos

Crash Simulation at Group PSA : Main Stakes and Perspectives

Presentation by Laurent Di Valentin, CAE Master Expert at PSA Group.

The constant improvements of the CAE process (from subsystem levels to the full car itself) and the development of optimization tools to reduce the mass and increase the performances led us to use the simulation as one v

ATC Presentations, Videos

Recent and Future Developments in Flux and FluxMotor

Presentation by Vincent Leconte, Senior Director of Global Business Development - EM Solution at Altair.

ATC Presentations, Videos

Showcase Video: GE's Flow Simulator

Introductory video for Flow Simulator software by GE for integrated flow, heat transfer and combustion design.

Videos

Sunshine School Bus Design Story - Industrial Design for Automotive

Sathiya Seeland, Head of Styling for Product Design at Ashok Leyland, presents at Converge 2016 in Bangalore, India.

ATC Presentations, Videos

Rapidly Exploring Electric Vehicle Architectures with C123

To overcome the challenges of developing a vehicle architecture shared across a range of electrical vehicles, National Electric Vehicle Sweden (NEVS) leveraged Altair’s unique three stage concept development process, C123 using a combination of op...

Videos

Bend-It – Rethinking Customized Orthopaedic Devices Using Additive Manufacturing

Dustin Ahrendt and Felix Schmitt from Technische Universitat Dresden present at Converge 2017 in Essen, Germany.

ATC Presentations, Videos

Development of a New Lightweight Aluminum Profile for a Glass Balustrade

Gabriele Romagnoli, Head of Structural Engineering at Farone, presents at Converge 2017 in Essen, Germany.

ATC Presentations, Videos

Webinar: CONVERSE-RADIOSS Integrative Simulation of Short-Fiber-Reinforced Plastic Components

In this webinar, learn how CONVERSE enables the consideration of the real anisotropic mechanical behavior of short-fiber-reinforced materials in an FE analysis. More precisely predicting part stiffness and failure. Significantly enhancing FEA reli...

Videos, Webinars

Altair and Ziegler Instruments Combine Experience and Technologies to Identify and Eliminate Squeak and Rattle Issues

Altair has partnered with Ziegler-Instruments to enhance its Squeak and Rattle Director (SnRD), making it the most advanced and comprehensive solution on the market to predict and eradicate squeak and rattle phenomena in vehicles, aircraft and oth...

Customer Stories, Videos

Webinar: Saving Lives with Simulations: CEDREM Collaborates with DuPont on Ballistic Protection Solutions

The webinar will be a presentation of research work performed in collaboration between DuPont and CEDREM. DuPont has developed a new ballistic membrane in order to assess protection solutions. CEDREM has created numerical models of protection solu...

Videos, Webinars

We Have the Tools, But Let’s Not Lose Sight of the Knowledge

Rafa Corell, CEO at Indigraf, presents at Converge 2016 in Essen, Germany.

ATC Presentations, Videos

Building a Materials Knowledge Core for Your Company with Workgroup Material DatabasePro

This Webinar will show how to quickly and easily build a library of Material Properties data and CAE Material files using Matereality’s Workgroup Material DatabasePro through the Altair Partner Alliance.

Videos, Webinars

HPCwire Interview at SC'16

Watch to learn about the open source project and new products being added to the PBS Works suite.

Video Testimonials

Introduction to OptiStruct

OptiStruct is an industry proven, modern structural analysis solver for linear and nonlinear problems under static and dynamic loadings. It is the market-leading solution for structural design and optimization.

Videos

Centre for High Performance Computing (CHPC)

Hear how the Centre for HPC in South Africa is using PBS Professional and PBS Analytics to simplify HPC for their users.

Video Testimonials, Videos

S1 AM Bracket - Rupture Test Time Lapse

Additive manufacturing (AM) technologies have progressed rapidly in the last years. Supported by the recent developments of design optimisation tools and manufacturing capabilities, components and parts produced using AM are emerging more and more into the focus of space industry.
The aim of this p

Videos

Customer Story: Peter Macapia

Dr. Peter Macapia discusses solidThinking's part in reinventing structural systems and rethinking what a building is.

Customer Stories, Video Testimonials

Gordon Murray Design Discuss the Future of Automotive Manufacturing & iStream

Dr Ralph Clague, Powertrain Systems Manager at Gordon Murray Design (GMD) speaks to Altair ProductDesign about the current challenges in the automotive industry and how their iStream process can deliver lighter, low cost electric vehicles. Altair ...

Customer Testimonials, Videos
434 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!