Resource Library

Seam Weld Fatigue

This video shows the typical workflow to perform a seam weld fatigue analysis with HyperLife.

Videos

ShowCase Video: ModelCenter® MBSEPak

Introductory video for ModelCenter® MBSEPak by Phoenix Integration.

Videos

ShowCase Video: ModelCenter® Integrate

Introductory video for ModelCenter® Integrate by Phoenix Integration.

Videos

Simulation-Driven Development of Lightweight Brakes with Heavyweight Performance

Presentation by Martin Wollstad, Computational Engineer at Haldex Brake Products.

ATC Presentations, Videos

Multibody Modeling of Armored Car at Off-road Conditions using MotionView

Presentation by Dr. Vadim Favorsky, Senior R&D Engineer at Plasan Sasa.

In this presentation results of multibody modeling are compared to experimental results of a middleweight armored car. The car prototype which was built by Plasan Sasa, has a monocoque chassis construction to save wei

ATC Presentations, Videos

Vehicle NVH Design and Development at Jaguar Land Rover using NVH Director

Presentation by Dr. Andrew Burke, Jaguar Land Rover.

Jaguar Land Rover is integrating Altair’s NVH Director into their Vehicle NVH development process. This will enable the formalization of model requirements and processes, ensuring that vehicle models are built to consistent standards an

ATC Presentations, Videos

Leveraging Advanced Inox Steel Grades and Multi-Disciplinary Optimization Methods to Improve the Performance of Body-in-White

Presentation by Manon Abecassis, Research Engineer at APERAM.

This presentation will detail how stainless steel can be cleverly placed and leveraged to improve the mass / performance / cost ratio of body in white design. The demonstration will rely on intensive usage of simulation and opt

ATC Presentations, Videos

Implementation of Simulation-Driven Design at Leonardo

Presentation by Fabio Angioloini, Airframe Structures and New Technology & Material Lead at Leonardo.

Leonadro Helicopters worked on a huge weight reduction campaign on AW 189 on both metallic and composite structures, as well as on cost reduction trading-off metallic Vs. composite struct

ATC Presentations, Videos

New Developments in Technology and Process for Design for Additive Manufacturing

The focus of these presentations address in particular, how to create economic applications by combining new manufacturing technologies and a simulation driven design process.

Leading industry representatives present successful applications of additive manufacturing in combination with ne

ATC Presentations, Videos

Highly Optimized Passive Lubrication System for an EV Transmission

Presentation by Dr. Milos Stanic, nanoFluidX Product Manager at Altair.

Optimising the rotational losses of an EV transmission is essential to improve range. Whilst bearing and gear losses are well understood, the interaction between rotating components and transmission fluid rarely explo

ATC Presentations, Videos

Zaha Hadid Presents Innovation in AEC

Eddie Can, Senior Associate at Zaha Hadid Architects, keynote presentation at the 2018 Global ATC in Paris, France.

During his speech Mr. Can will focus on the relationship between highly complex design documents and construction technique that minimize cost while working on a custom and double c

ATC Presentations, Videos

Durability Testing / Loads, Fatigue Curces and Material Datasets

Presentation by Axel Werkhausen, Manager FEMFAT Support and Sales at Magna Powertrain ECS.

ATC Presentations, Videos

Different Level of Fatigue Analysis 

Presentation by Professor Darrel Socie, Consultant and Hariprasad Gowda, OptiStruct Program Manager - Aerospace at Altair.

In this presentation, we will discuss why there so many fatigue tools on the market and which ones are best.

ATC Presentations, Videos

Altair's New Fatigue Platform, Altair HyperLife

Presentation by Hariprasad Gowda, OptiStruct Program Manager - Aerospace and Byung Soo Kang, Technical Specialist at Altair.

Even for complex computationally intensive problems, the UI must be simple and easy to use. Here we introduce the all easy to use, easy to learn fatigue analysis platfo

ATC Presentations, Videos

Engineering Analytics to Support Product Development Control

Presentation by Rocco Cappiello, IOT Business Developer at Altair.

Altair Engineering Analytics empowers Engineers and Executives to make better decisions faster by managing reporting and analytics on the main engineering processes in one openly architected and highly configurable tool to

ATC Presentations, Videos

Lead Time Reduction for Multiphysics Analyses in SimLab 2019

Presentation by Karthikeyan Sankarraj, Team Leader – Loads/BC Tools at Altair.

ATC Presentations, Videos

Defining Positioning System for Heavy Lift Barge with AcuSolve

Presentation by Pawel Sadowski, Technical Support Manager at DES ART.

Even during building roads your approach may be different from the standard one. The nature often forces engineers to use their creativity and go beyond typical projects. This leads to some unique, futuristic structures or

ATC Presentations, Videos

Applied Fluid Dynamics, Thermal Management and e-Drive Oiling

Learn how industry leaders are using Altair's CFD solutions to drive innovation in their products and to cope with complex projects.

In the first part thermal management of electric drivetrains is addressed with a multiphysics approach to combine high-fidelity fluid flow and thermal analys

ATC Presentations, Videos

MOTH2

Presentation by Sylwester Szymanski, MOTH2.

Sylwester Symanski discusses the MOTH2 project, a 3-wheeled vehicle, and the use of Inspire and OptiStruct for topology optimization.

ATC Presentations, Videos

A CFD Approach for the Assessment of Fuel Tank Sloshing Noise

Presentation by Matthäus Jäger, CFD Simulation Engineer at Magna Steyr Fuel Tec.

Fuel tank sloshing noise is becoming increasingly noticable as engines, especially hybrid vehicles in electric mode, become quiter. The general requirement is to avoid all possible noise audiable for passengers

ATC Presentations, Videos

How to Design Die-Casting Parts with Altair Inspire Cast

Presentation by El Abidi Ahmed, CAE Manager - Senior Expert at U-Shin Group.

ATC Presentations, Videos

Webinar: First-Time-Right Design of Matching Circuits for Complex Antenna and RF Applications

In the webinar, the sources of the discrepancy between measurements and simulation will be identified. We will demonstrate a first-time-right design flow of matching circuit using the FEKO electromagnetic solver and the Optenni Lab RF Design Autom...

Videos, Webinars

Webinar: How to Instantly Assess Oceanographic Mooring Designs

This webinar presents a different way of solving a static mooring line profile and the effects on calculation speed, mooring profile design, and limitations for dynamic analysis. This webinar will include a brief overview of our dynamic analysis s...

Videos, Webinars

Industry 4.0 – How Digitalization Makes Weight & Balance Process More Agile and Connected

Kai Thräne, Manager Weight & Balance Research & Development at Airbus Helicopter presents at the 2017 European ATC.

In the context of Industry 4.0, most enterprise processes must become more digitized. A key element will be the evolution of the traditional product development toward a connected a

ATC Presentations, Videos

Altair FEKO for Marine EMC Applications

Altair FEKO is a leading comprehensive electromagnetic analysis software package, which is widely used in many industries and built on state of the art computational electromagnetic techniques to provide users with solutions to a wide range of ele...

Videos

Showcase Video: GE's Flow Simulator

Introductory video for Flow Simulator software by GE for integrated flow, heat transfer and combustion design.

Videos

Schneider Electric uses Flux to Design IoT Actuators

Schneider Electric is a world leader in electrical distribution equipment. Remy Orban, Mechatronic Engineer at Schneider Electric discusses a low voltage circuit breaker actuator design using Flux

Customer Testimonials, Videos

Build a Rocket

Tim Morton, Director of Industrial Design at Newell Brands, presents at Converge 2017 in Los Angeles, California.

ATC Presentations, Videos

Design Research Experiences at ZH CoDe

Filippo Nasetti, Senior Associate at Zaha Hadid, presents at Converge 2017 in Essen, Germany.

ATC Presentations, Videos

Simulation Driven Design in the Cloud

Chad Zamler, Marketing Director of solidThinking, presents at Converge 2017 in Essen, Germany.

ATC Presentations, Videos

Webinar: Real Time Engine Simulations in LOGEengine 3.0

The webinar will introduce all new features of our latest product release LOGEengine 3.0 and discuss the steps needed to setup an engine combustion analysis with detailed chemistry.

Videos, Webinars

Efficient Electromagnetic Actuator Prototype Design with Flux

Bitron is an automotive company producing mechatronic devices, such as actuators, sensors and switches. Siska Verhamme and Pablo Avarez, both Engineers at Bitron, describe their challenges and how Flux can help them, to accelerate the design proce...

Video Testimonials

Sujan CooperStandard Achieves Lighweighting & Performance Targets with Altair

Sujan CooperStandard uses solidThinking Inspire, OptiStruct and HyperMesh to design a torsional vibration damper that meets NVH criteria, optimize bracket and various mount designs.

Videos

Showcase Video: Total Materia

Introductory video to Total Materia from Key to Metals.

Videos

Matereality-HyperWorks CAE Connectivity

Use Matereality to store all of your relevant material data, convert raw data in your database into formatted CAE Material files and export your library as a Master Material file for use in HyperWorks.

Demo Models, Tips & Tricks, Videos, Webinars

Tokyo Institute of Technology

Tokyo Institute of Technology discusses the benefits of using PBS Professional.

Video Testimonials

Imperial College London

Watch this interview to see how Imperial College London benefits from using PBS Professional for cluster workload management.

Video Testimonials

HyperWorks Helps Midea Design and Optimize Millions of AC Units

HyperWorks Helps Midea Design and Optimize Millions of AC Units. Using an air conditioner, for example, with HyperMesh, it takes Midea Design one week to mesh the whole model, setup loads and constraints, run the analysis, and extract the result.

Videos

Introduction to HyperWorks Virtual Wind Tunnel

Altair’s HyperWorks Virtual Wind Tunnel is a new solution designed to provide better wind tunnel simulation technology and user experience. With a highly automated and streamlined workflow process and high quality CFD technology, Altair’s HyperWor...

Videos

FEKO : Helping to Understand the Universe

The Square Kilometre Array (SKA) : Cutting edge technology, design and innovation

Videos
364 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!