Resource Library

AVL Fire - CFD for IC Engine Development

Introducing Fire M - The easy way to efficient CFD

Videos

ShowCase Video: ModelCenter® MBSEPak

Introductory video for ModelCenter® MBSEPak by Phoenix Integration.

Videos

Simulation-Driven Development of Lightweight Brakes with Heavyweight Performance

Presentation by Martin Wollstad, Computational Engineer at Haldex Brake Products.

ATC Presentations, Videos

Airbus Global Migration to Altair HyperWorks for Modeling and Visualization

Presentation by Christophe Rigou, Linear & Non-Linear Solutions - ESCSAN at Airbus.

To support the next aircraft development and new derivative programs, AIRBUS Commercial Aircraft division has chosen HyperMesh and HyperView pre&post-processing software developed by Altair. The Patran t

ATC Presentations, Videos

EM Simulation for Wireless Systems and Antenna Integration on Motor Vehicles

Presentation by Dr. Ahmadreza Jafari, Radio Reception and Antenna Expert, & Phillippe Boutier, Référent RadioFréquence at Renault.

In this presentation, different examples of Renault RF simulations regarding antenna applications such as keyless entry and ignition, AM/FM/DAB radio, radar a

ATC Presentations, Videos

Vehicle NVH Design and Development at Jaguar Land Rover using NVH Director

Presentation by Dr. Andrew Burke, Jaguar Land Rover.

Jaguar Land Rover is integrating Altair’s NVH Director into their Vehicle NVH development process. This will enable the formalization of model requirements and processes, ensuring that vehicle models are built to consistent standards an

ATC Presentations, Videos

Increasing the Productivity of Tooling Applications with 3D Printing and Multiphysics Simulation

Presentation by Stefan de Groot, Head of Development and Engineering at PROTIQ.

Injection molding tools and high conductive copper inductors are two prominent examples where the symbiosis of Simulation driven Design and Additive Manufacturing provides dramatic potential to increase the pr

ATC Presentations, Videos

New Developments in Technology and Process for Design for Additive Manufacturing

The focus of these presentations address in particular, how to create economic applications by combining new manufacturing technologies and a simulation driven design process.

Leading industry representatives present successful applications of additive manufacturing in combination with ne

ATC Presentations, Videos

Design for the Future of e-Mobility

The global automotive industry is on the verge of disruption with electrification being one of the major trends. In this session we will discuss the challenges and opportunities engineers are facing in the design of the future e-Mobility, includin...

ATC Presentations, Videos

Highly Optimized Passive Lubrication System for an EV Transmission

Presentation by Dr. Milos Stanic, nanoFluidX Product Manager at Altair.

Optimising the rotational losses of an EV transmission is essential to improve range. Whilst bearing and gear losses are well understood, the interaction between rotating components and transmission fluid rarely explo

ATC Presentations, Videos

Altair's New Fatigue Platform, Altair HyperLife

Presentation by Hariprasad Gowda, OptiStruct Program Manager - Aerospace and Byung Soo Kang, Technical Specialist at Altair.

Even for complex computationally intensive problems, the UI must be simple and easy to use. Here we introduce the all easy to use, easy to learn fatigue analysis platfo

ATC Presentations, Videos

Durability Testing / Loads, Fatigue Curces and Material Datasets

Presentation by Axel Werkhausen, Manager FEMFAT Support and Sales at Magna Powertrain ECS.

ATC Presentations, Videos

Application of Machine Learning for Engineering Problems

Presentation by Fatma Kocer, VP Business Development Design Exploration at Altair.

Engineering design and operational decisions depend largely on engineers understanding of applications. This includes assumptions made to simplify problems to solve them. However, these assumptions often in

ATC Presentations, Videos

Deep Learning Image Recognition in Engineering Data Analysis

The Digital Twin and IoT seminar features the key ideas behind the concept of the Digital Twin, predictive maintenance, and its practical relevance especially for product engineering and simulation.

Presentations recorded at the Global ATC in Paris, France on October 16, 2018.

ATC Presentations, Videos

Motorcycle Crankshaft Modeling with SimLab at BMW Motorrad

Presentation by Roland Zettler, Development Engineer at BMW Motorrrad, Simulation and Predevelopment Power Train.

Motorcycle crankshaft simulation uses a detailed FE-mesh for structural and fatigue analysis. Due to long time durations for FE meshing, the idea was to establish a process fo

ATC Presentations, Videos

Seamless integration of 0D-1D and 3D worlds

This webinar will introduce you to Altair Activate for control system design and the ease of solving real world problems with co-simulation between MotionSolve (multibody simulation suite) and Activate.

Videos, Webinars

Developing the Electric Drivetrain of Tomorrow - How Numerical Tools can Support Cooling and Lubrication System Development

Presentation by Johannes Winklinger, Energy & Fluid Expert at Magna Powertrain.

We are right at the beginning of the new mobility era with deep impact on the architecture of cars. Hybridization and electrification are the dominating topics in the automobile industry and consequently the power

ATC Presentations, Videos

Defining Positioning System for Heavy Lift Barge with AcuSolve

Presentation by Pawel Sadowski, Technical Support Manager at DES ART.

Even during building roads your approach may be different from the standard one. The nature often forces engineers to use their creativity and go beyond typical projects. This leads to some unique, futuristic structures or

ATC Presentations, Videos

A CFD Approach for the Assessment of Fuel Tank Sloshing Noise

Presentation by Matthäus Jäger, CFD Simulation Engineer at Magna Steyr Fuel Tec.

Fuel tank sloshing noise is becoming increasingly noticable as engines, especially hybrid vehicles in electric mode, become quiter. The general requirement is to avoid all possible noise audiable for passengers

ATC Presentations, Videos

Aspects of Heterogeneous System Models in Industrial Applications

Presentation by Robert Höpler, Founder of SysOpt GmbH.

Heterogeneity can be present on various stages in system modelling and simulation. A system model is often called ‘multi-domain’, when different technical domains are present, such as hydraulics, mechanics, and control. When it comes

ATC Presentations, Videos

Thermal and Impact Analysis of a Nuclear Flask Design

Presentation by Thomas Goulding, Mechanical Engineer at Assystem Energy and Infrastructure.

Nuclear transport flasks are used to store and transport nuclear waste material. When transported on public roads the flask must fulfill IAEA test requirements, which are designed to ensure that re

ATC Presentations, Videos

Applied Fluid Dynamics, Thermal Management and e-Drive Oiling

Learn how industry leaders are using Altair's CFD solutions to drive innovation in their products and to cope with complex projects.

In the first part thermal management of electric drivetrains is addressed with a multiphysics approach to combine high-fidelity fluid flow and thermal analys

ATC Presentations, Videos

MOTH2

Presentation by Sylwester Szymanski, MOTH2.

Sylwester Symanski discusses the MOTH2 project, a 3-wheeled vehicle, and the use of Inspire and OptiStruct for topology optimization.

ATC Presentations, Videos

Webinar: First-Time-Right Design of Matching Circuits for Complex Antenna and RF Applications

In the webinar, the sources of the discrepancy between measurements and simulation will be identified. We will demonstrate a first-time-right design flow of matching circuit using the FEKO electromagnetic solver and the Optenni Lab RF Design Autom...

Videos, Webinars

NEVS Uses Simulation Driven Innovation in Car Body Design

Dr. Lars Fredriksson, Business VP – Simulation Driven Innovation at Altair presenting on behalf of NEVS at the 2017 European ATC.

The automotive industry is experiencing ever increasing requirements on new vehicles from all directions. Still, development cycles must be shortened and development c

ATC Presentations, Video Testimonials

Showcase Video: GE's Flow Simulator

Introductory video for Flow Simulator software by GE for integrated flow, heat transfer and combustion design.

Videos

Bend-It – Rethinking Customized Orthopaedic Devices Using Additive Manufacturing

Dustin Ahrendt and Felix Schmitt from Technische Universitat Dresden present at Converge 2017 in Essen, Germany.

ATC Presentations, Videos

Design Research Experiences at ZH CoDe

Filippo Nasetti, Senior Associate at Zaha Hadid, presents at Converge 2017 in Essen, Germany.

ATC Presentations, Videos

Build a Rocket

Tim Morton, Director of Industrial Design at Newell Brands, presents at Converge 2017 in Los Angeles, California.

ATC Presentations, Videos

Webinar: Introduction to AVL CRUISE™ M

This webinar will introduce AVL CRUISE M™ with a focus on using CRUISE M™ for model-based control function development.

AVL CRUISE™ M is a multi-disciplinary system simulation solution that supports model-based development using high quality real-time models from domains including engine, flow, a

Videos, Webinars

Webinar: Real Time Engine Simulations in LOGEengine 3.0

The webinar will introduce all new features of our latest product release LOGEengine 3.0 and discuss the steps needed to setup an engine combustion analysis with detailed chemistry.

Videos, Webinars

Efficient Electromagnetic Actuator Prototype Design with Flux

Bitron is an automotive company producing mechatronic devices, such as actuators, sensors and switches. Siska Verhamme and Pablo Avarez, both Engineers at Bitron, describe their challenges and how Flux can help them, to accelerate the design proce...

Video Testimonials

Sujan CooperStandard Achieves Lighweighting & Performance Targets with Altair

Sujan CooperStandard uses solidThinking Inspire, OptiStruct and HyperMesh to design a torsional vibration damper that meets NVH criteria, optimize bracket and various mount designs.

Videos

PSA Groupe Discusses the Simulation of Squeak and Rattle Noise in its Vehicles

In this interview, Sebastien Gourg, CAE Methods, Expertise and Support Engineer from PSA Groupe gives us insight into his experience of working with Altair ProductDesign during the implementation and customization of the Squeak and Rattle Director...

Customer Stories, Videos

Matereality-HyperWorks CAE Connectivity

Use Matereality to store all of your relevant material data, convert raw data in your database into formatted CAE Material files and export your library as a Master Material file for use in HyperWorks.

Demo Models, Tips & Tricks, Videos, Webinars

Getting Started with XLDyn

Series of short videos describing how XLDyn works.

Videos

NovaFlow&Solid Online Tutorials

NovaCast Systems AB is pleased to bring you a free collection of instructions and tutorials to become better acquainted with the software.

eLearning, Getting Started, Tips & Tricks, Training Materials, Tutorials, Videos

Mahle Discuss Its Use Of The Automated Reporting Director

A close collaboration was forged between MAHLE and Altair ProductDesign to create the automated reporting solution. While Altair ProductDesign developed the code, MAHLE described the current process and reporting requirements to ensure business al...

Videos

Customer Story: Peter Macapia

Dr. Peter Macapia discusses solidThinking's part in reinventing structural systems and rethinking what a building is.

Customer Stories, Video Testimonials

FEKO : Helping to Understand the Universe

The Square Kilometre Array (SKA) : Cutting edge technology, design and innovation

Videos
364 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!