Resource Library

Smart Multiphysics: Explosives and Concrete Material Simulation in RADIOSS

Webinars

Multi-disciplinary Optimization of Aero-structures

Learn about how HyperWorks can be used to perform multi-disciplinary analysis and optimization involving structural, thermal, dynamic, and fluid analysis.

Webinars

FEKO Webinar: Wave Propagation and Radio Network Planning Simulation with WinProp

The rapid growth of mobile and wireless communications has significantly increased the need for propagation modelling and network planning simulation.

This webinar will introduce how WinProp fits into the electromagnetic simulation offering of HyperWorks, including the future plans in connection

Webinars

Flux Webinar: Sensor and Actuator Design for Transportation Applications

In this webinar we discuss and illustrate how electromagnetic simulating technology enables a flexible new alternative solution for electromagnetic transmission, with electromagnetic couplings replacing mechanical and differential couplers.

Webinars

Electromagnetic Simulation Growth in the Product Development Cycle

Product development is becoming more challenging due to stricter regulations, and reduced development times and budgets for prototyping and testing. The necessity to add more electronics into new products is making their design more challenging an...

Webinars

FEKO Webinar: Automotive Radar Design & Integration at 76 - 77 GHz

This webinar covers several techniques and approaches which highlight how FEKO can be applied for efficient and accurate simulation of the radar antenna design as well as the integration aspects, including radome and bumper effects.

Webinars

FEKO Student Competition Winner 2015: Design of Platform-mounted HF Antennas with Enhanced Bandwidth using the Characteristic Mode Configuration in FEKO

In this, the first presentation of a winning entry in the FEKO Student Competition, Professor Nader Behdad from the University of Wisconsin-Madison, presents the winning entry of his student, Ting-Yen Shih.

Webinars

Flux Webinar: Electric Machine Design Workflow for Traction Applications

Nowadays, when modeling motors for electric vehicles, more and more constraints are to be fulfilled at the same time. The motor has to be very efficient, less noisy, avoid vibration and at the same time - not too hot and very cheap. In this webin...

Webinars

FEKO Webinar: EMC Simulation of Automotive, Aerospace & Other Applications with FEKO

This webinar recording provides an overview of features, applications and real use-cases where FEKO is used for EMC simulation, including emissions, immunity, lightning effects, High Intensity Radiated Fields (HIRF), Electromagnetic Pulses (EMP), ...

Webinars

FEKO Webinar: The Use of Model Decomposition and Equivalent Sources for Faster Simulation

System level simulation often involves multiscale type problems, where the structure might be electrically large while also containing details which are significant to the RF performance. These types of simulations can typically require large comp...

Webinars

Flux Webinar: Improving the Manufacturing Process with Efficient Induction Heating Applications

Heat Treatment is widely used in different industries in different manufacturing processes, such as heating, brazing, hardening, welding, sealing, etc. and in industries, such as food, energy or transportation.

In this webinar, we will show you how Flux simulations can efficiently help to design,

Webinars

FEKO Webinar Recording: Time Domain Responses from Frequency Domain Results

Frequency domain results can be transformed to obtain time domain responses. This webinar will cover the signal setup in POSTFEKO and how it relates to the frequency domain specification in CADFEKO.

Webinars

FEKO Webinar: Taking Radar Cross Section (RCS) to the Next Level

Based on practical examples, this webinar will offer a guided tour through computational methods to determine Radar Cross Section (RCS), from objects of just a few wavelengths, to objects of thousands of wavelengths in size.

Webinars

How to Capitalize on Digital Transformation

Nasdaq and Altair joined together to discuss How to Capitalize on the Digital Transformation. Nasdaq’s Principal Technologist, Mike Viola, sat down with Altair’s Fatma Kocer, Vice President Business Development Design Exploration, Yeshwant Mummane...

Videos, Webinars

Flux Webinar: Accelerate your Design Process with Flux - Dealing with Complex 3D CAD Models

In this webinar discover all the capabilities of the Altair pre-processing tools to handle real complex cases with Flux.

In addition we explore the powerful features of HyperMesh allowing you to to defeature, modify and manage your complex assemblies. We also explore the various functionalities i

Webinars

Flux Webinar: Efficient Solutions for EM Design Exploration and Optimization

In this webinar we will demonstrate how Altair HyperStudy, HyperWorks’s multi-disciplinary design exploration tool coupled to Flux can help engineers in the design of high-performance products and reduce cost and the development cycle.

Webinars

Flux Starter Motor Design - Generator

Watch this recorded webinar to learn how Flux can help with designing Starter Motors.

Webinars

FEKO Webinar: Evolution and Usage of EM Simulation in the Naval Industry

FEKO’s broad solver technology offering is well suited to the efficient and accurate simulation of electrically very large structures.

In this webinar we will offer several use cases of Naval related electromagnetic simulations using FEKO.

Besides more general problems like antenna placement,

Webinars

Flux Webinar:Cutting Edge Electromagnetic LF Simulation Solutions - Discover Flux 2018 & Couplings to the HyperWorks Platform

Using breakthrough technologies, Flux is the perfect tool for the analysis, design and optimization of modern applications such as electric rotating machines, actuators and sensors, high power electrical equipment, heat treatment or electromagneti...

Webinars

Flux Webinar: Cutting Edge Electromagnetic LF Simulation Solutions - Discover Flux 2018 & Couplings to the HyperWorks Platform

Using breakthrough technologies, Flux is the perfect tool for the analysis, design and optimization of modern applications such as electric rotating machines, actuators and sensors, high power electrical equipment, heat treatment or electromagnetic compatibility.

Flux 2018 includes a new PEEC so

Webinars

Overcoming Challenges in 5G Antenna Design, Radio Coverage & Channel Analysis with FEKO & WinProp

This webinar will show how FEKO and WinProp can be used for the 5G antenna design, analysis of radio coverage and channel statistics including the antenna effect. This allows the requirements to be derived for the 5G antennas, as well as strategie...

Webinars

FEKO Webinar Recording: Accelerate Complex Platform Modelling and Simulation with HyperMesh and FEKO

FEKO is the most used and recognized electromagnetic simulation software for antenna placement, EMC and RCS of platforms, including aircraft, vehicles, ships, satellites and missiles. The clean up of the model can be tedious, depending on the quality of the CAD data.

In this webinar we demonstr

Webinars

Time Domain Responses from Frequency Domain Results

Frequency domain results can be transformed to obtain time domain responses. This webinar will cover the signal setup in POSTFEKO and how it relates to the frequency domain specification in CADFEKO.

Webinars

FEKO Webinar: The Growing Role of EM Simulation for Connected Vehicles and e-Mobility

This webinar will show how FEKO and WinProp are used to solve design and validation challenges related to:

(a) Connected vehicles, including antenna integration aspects. The use of virtual drive tests to reduce the costs and time of extensive road tests being done to study and analyze new connec

Webinars

FEKO Webinar: Design Optimization with FEKO & HyperStudy

Solving complex design problems with an approach based on intuition can be challenging, especially when multiple design parameters interact with one another and several design goals are targeted. Join us for this webinar in which we will present ...

Webinars

Flux Webinar: Design of Electromagnetic Actuators with Flux & Optimization

During this 30 minute on-demand webinar discover how actuators are replacing standard hydraulic motors and how to optimize your design.

Webinars

FEKO Student Competition Winner 2016 Webinar: Embedded Element Pattern Beam Model for Murchison Widefield Array

Daniel Ung's entry was selected as the winner of the 2016 FEKO Student Competition.

A precursor to the Square Kilometre Array (SKA), the Murchison Widefield Array (MWA) radio telescope was constructed in the Murchison Radio-Astronomy Observatory in Western Australia.

In this one-hour webinar D

Webinars

FEKO Webinar: Feature Extension & Automation in FEKO through Scripting

The powerful scripting capabilities in FEKO provides users with the means to extend the features available in the interface. Tasks and calculations that need to be performed repeatedly can also be automated allowing users to save time.

In this webinar the scripting language (Lua) and the availab

Webinars

Accelerate your Creativity with Flux 12.2

The new version of Flux software brings many new features that will accelerate the engineer’s creativity when designing electric equipment or electromechanical devices. Improvements in 3D modeling, post-processing and transient solving can be seen as well as a faster simulation process.

This vers

Webinars

FEKO Webinar Recording : Designing with Characteristic Mode Analysis (CMA)

Characteristic Mode Analysis (CMA) gives insight into the fundamental resonant behaviour of a structure. This helps engineers to follow a systematic design approach, making use of the parameters calculated with CMA.

This webinar covers the latest in FEKO's CMA solver. The webinar starts with a di

Webinars

Flux Webinar: Green Taxiing Application

Understand FEM design concepts behind building a Green Taxiing System and other similar electromechanical devices to help airlines save on fuel costs and cut C02 emissions.

Webinars

FEKO Webinar: An Introduction to FEKO

This webinar is aimed at new users of FEKO. Topics covered include the user interface, model set-up,solver selection, tips and tricks, as well as demonstrations.

Webinars

FEKO Webinar: Efficient Antenna Array Modelling

FEKO contains various techniques for the efficient modeling of antenna arrays during the design process. The application and advantages of techniques such as periodic boundary conditions (PBC), the domain Green's function method (DGFM) and equiva...

Webinars

Key Benefits of Combining Measurements with Simulations for Antenna & EMC Applications

Altair has been working with Microwave Vision Group (MVG) for many years on the combination of measurements done with MVG antenna measuring systems with FEKO simulations. This webinar will explain how such a combination represents an alternative s...

Webinars

FEKO Student Competition Winner 2015 Webinar: Design of Platform-mounted HF Antennas with Enhanced Bandwidth using CMA

For the first time, the winning entry for the 2015 FEKO Student Competition is presented in a webinar format.
Professor Nader Behdad from the University of Wisconsin-Madison will present his winning student, Ting-Yen Shih's entry.

Webinars
275 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!