Resource Library

Cabin Comfort - Analyze Airflows and Thermal Effects

It is cost prohibitive to rely on climatic wind tunnel tests in the initial vehicle HVAC system design process. Additionally, the passenger compartment airflow and thermal environment is one in a state of constant change requiring use of transient CFD simulations.

In this 45-minutes complimentary

Webinars

Webinar: Recent Advances – Vibration Fatigue for Aerospace Systems

This webinar will present the latest advances that have been included in the CAEfatigue VIBRATION product for the analysis and design of aerospace systems.

Webinars

CAEfatigue (CFV) Academy

The CFV Academy is an online resource library with over 30 pre-recorded, on-demand videos where users can learn everything they need to know to start using CAEfatigue VIBRATION. Please note: You will need to login to Altair Connect to view this re...

Training Materials, Webinars

Introduction to CADdoctor by Elysium

CADdoctor is a software that does 3D data translation and geometry repair and simplification for CAE.

Webinars

FEKO Webinar Recording: Radar Cross Section & Antenna Design

Due to the size and complexity of a Navy ship at sea, proper calculation of radar cross section and of antenna coverage has long been elusive.

This webinar will show how, with hybrid numerical methods available today, this has become possible.

The practical pros and cons of various methods wil

Webinars

FEKO Webinar Recording: EM Design in the Electronics Industry

This webinar covers FEKO’s role in the design and optimization cycle’s typical to the electronics industry. These include early stage antenna selection, automated optimization, tolerance analysis and what-if trade-off investigations. Antenna integ...

Webinars

Webinar: Save your energy with Materialise 3-matic in the after topology optimization process

This webinar focuses on Materialise 3-matic's complimentary position to Altair's topology optimization and illustrates its capabilities on light weight structures design, with a focus on printable design.

Webinars

From Injection Molding to Mechanical Simulation - Added Value for FEA Through Integrated Solutions with CONVERSE

In this webinar, learn how CONVERSE can be used effectively for electronics and consumer goods made of plastics. FEA is frequently applied, as often these products undergo high mechanical as well as thermal loads a proper strength assessment is de...

Webinars

Introduction to Virfac by GeonX

Virfac® addresses the advanced simulation of welding processes (fusion, friction stir, inertia friction, etc.), heat treatment, surface treatment, carburizing, additive manufacturing and damage tolerance based on the XFEM technology.

Webinars

Using Design Profit® MRL to conduct a Manufacturing Readiness Assessment in the Defense Industry

Design Profit® MRL (Manufacturing Readiness Level) provides unparalleled capability to perform a structured, collaborative Manufacturing Readiness Assessment (MRA). Design Profit® MRL exposes risk, rolls up costs and provides direction early at th...

Webinars

Webinar: Aerospace Defense Stress Analysis with StressCheck

Over the past 25 years, ESRD has pioneered and developed an advanced FEA numerical simulation technology that is well-suited for detailed stress analysis of complex parts associated with the aerospace defense industry.

Webinars

FEKO Webinar Recording: The CMA Advantage

In this webinar we cover some of the theory of CMA, as well as present several new case studies highlighting the CMA design advantage. These include optimum feeding and placement of antennas on platforms and decoupling of antenna elements in a MIM...

Webinars

Fatigue analysis in Heavy Industries - the larger the vehicle the higher the need for endurance on misuse

FEMFAT offers fatigue life prediction (FLP) of all vehicle components (engine, gearbox, chassis, frames, car bodies and structures) and machinery equipment based on Finite Element Analyses (FEA). Additionally to consideration of complex multi-axia...

Webinars

Vibro-Acoustic Simulations in Heavy Industry

With the help of Coustyx from ANSOL, a powerful fast multipole boundary elements (FMBEM) solver, engineers in the heavy machinery industry can now build intricate models of real life systems and perform vibro-acoustic simulations over a broad freq...

Webinars

Virtual Prototyping and Dynamic Load Analysis in Machine Design

Through the development of virtual prototypes of concepts that capture the dynamics of the system (or systems) early in the design process, machine designers can avoid many issues that often arise during the integration and prototyping stages.

Webinars

Using AlphaCell for quick & accurate sound package design in Heavy Industry

AlphaCell is an accurate solution for predicting the vibro-acoustic performances of sound packages including e.g. poro-elastic materials, perforated plates, visco-elastic materials, studded structures with inner filling, composite materials or mat...

Webinars

Using Design Profit® Custom Math Application to create a cost estimating system.

Design Profit® is a methodology and a process that exposes waste and risk in the product design so engineers can make informed trades to reduce complexity and create elegant designs for downstream stakeholders.

Webinars

Fatigue of Welds for Heavy Equipment using DesignLife

This webinar will review underlying methodology and approaches in DesignLife for predicting the fatigue life of welds using finite element models consisting of either shell or solid elements. A demonstration will review how DesignLife can be used ...

Webinars

FEKO Webinar Recording : Radomes with Frequency Selective Surfaces

In this webinar we present a complete solution for the design and analysis of radomes. We also discuss in detail the challenges and the solutions to the design and analysis of Frequency Selective Surface (FSS) radomes.

Webinars

DSHplus for Auto: Identification of Pressure Pulsations in Low Pressure Lines

In this webinar, you will learn how to use DSHplus to gain insight into modeling, simulation and analysis of transmission behavior of fuel line in the low pressure range.

Webinars

Model-Based Design and Development in Automotive Applications using Maple and MapleSim

This webinar will present a range of comprehensive examples using MapleSim to model complex automotive systems. Specific case studies will include full vehicle modeling, active suspension, stability control, steering and more.

Webinars

Webinar: Altair’s Solutions for Full-Vehicle NVH Analysis

An important factor in improving vehicle quality and perception is guided by how vehicles are designed for noise, vibration and harshness, making NVH an important domain for the automotive industry. Altair and its Alliance Partners offer a complete solution for automotive NVH applications.

In thi

Webinars

FEMFAT Webinar: Fatigue Analysis is Everywhere

FEMFAT is applied to mechanical systems in nearly all disciplines involving fatigue aspects. Engineers can follow the results and obtain approval from regulations such as GL Wind Renewables, IIW, Eurocode3 and British Standards.

Webinars

VMAP for the Automotive Industry - Modal Testing and Correlation Simplified

In this webinar, we will present an overview of the features and benefits of VMAP. In addition, the webinar will feature a case study that shows users how VMAP can be used to solve vibration problems in automotive products during the early design ...

Webinars

CONVERSE – Software for Accurate FE-Simulation of Plastic Automotive Applications

Using the anisotropic material behavior of short fiber reinforced plastics by assigning the fiber orientation and appropriate material behavior to your parts easily. The general procedure and the outcoming benefit will be shown with industrial par...

Webinars

Competitive Advantages in using EFEA for NVH Analysis for Automotive Applications

This webinar will showcase how to use Energy Finite Element Analysis (EFEA) for mid to high frequency noise and vibration simulations.

Webinars

Designing Composite Components for Automotive

Watch this 45-minute webinar recording to learn the latest advancements in composites design and optimization of carbon fiber composites and mixed material structures in the automotive industry.

Capabilities included in Altair HyperWorks as well as third party products available through the Altai

Webinars

Vibro-Acoustic Simulations in the Automotive Industry

In this webinar we will provide an overview of Coustyx its capabilities and benefits. Several applications from the auto industry are also presented.

Webinars

Driving accurate engineering decisions through comprehensive material knowledge with Total Materia

Total Materia provides the world’s most comprehensive material properties database covering over 250,000 metals, plastics, composites and a range of other non-metallic materials. This webinar is designed to help demonstrate how having the right ...

Webinars

LAP and CoDA: Your tools for composites preliminary analysis and post-processing in Automotive design

This webinar will show how automotive designers can use LAP and CoDA to prepare a laminated plate or structure, examine its behavior under load, overall or layer-by-layer. LAP checks specific points of any laminate, whilst CoDA examines the struct...

Webinars

Crash Material Model Parameter Generation and Validation for Ductile Plastics

The Matereality Workgroup Material DatabasePro solution enabled through the Altair Partner Alliance allows Altair HyperWorks users access to browser-based software to build and maintain productivity enhancing material databases on the same platfor...

Webinars

Motorsport to Automotive - Crossing the thought barrier. Using ChassisSim solve your vehicle dynamics problems quickly.

This webinar will cover how you can use ChassisSim to quickly construct a high fidelity multibody vehicle model and use the features of ChassisSim to get the answers you need quickly for both motor sport and automotive use.

Webinars

Software Asset Optimization: Right-Sizing Global Software Investments

In this webinar, our expert will showcase the benefits of using Altair SAO in a global organization and will provide an exclusive profile of one customer’s success with SAO.

Webinars

Webinar: Introduction to CAEfatigue VIBRATION: Random Response + Fatigue in the Frequency Domain

Frequency domain analysis is the method of choice for dynamic analysts and CAEfatigue VIBRATION will act like a turbo charger for such methods. This makes it a valuable new tool for durability estimates on large automotive systems and fatigue life...

Webinars

Accelerating Complex Simulations: An Example From Manufacturing - Radioss

Altair's software products enable a wide range of industries to conduct complex simulations crucial to engineering innovation and deliver reliable products to market. In a sector where supporting enhanced performance and new feature sets is critic...

Webinars

Altair HyperXtrude 2015 Brings Extrusion Simulation to the Shop Floor

Extrusion companies today must create a more extensive mix of complex profiles in shorter product-development cycles. At the same time, they seek to reduce production costs. With HyperXtrude 2015, engineers can analyze material flow and heat trans...

Webinars

Brief Demo of CoDA by Anaglyph

Brief demo of CoDA, which can be used to undertake preliminary analysis of sub-components with Plate, Beam, Joint, Flange or Laminate geometries.

Webinars

Brief Demo of LAP by Anaglyph

Brief demo of LAP, which can be used to analyze any type of composite laminate subjected to in-plane loads and moments.

Webinars

Webinar: Aerospace Fracture Mechanics using StressCheck

See how Stress Check is used to simulate fracture mechanics within the Aerospace industry.

Webinars

New Developments in Total Materia Premium Edition, including HyperMesh Integration

Showcasing the new Total Materia Premium Edition, see exactly how you can gain access to properties for over 240,000 metallic and non-metallic materials, use international cross reference tables, search stress strain and cyclic properties and much...

Webinars
491 Results