Resource Library

Data-Driven Warranty Risk Profile Analysis

Most manufacturers must handle large numbers of warranty claims related to a variety of products and components. The volume of claims can easily run to millions per year for consumer goods manufacturers. Patterns within claims data may indicate em...

Datasheets

Simulate at the Speed of Design

Simulation to impact design, it needs to validate design as it unfolds and drive its evolution. It needs to work directly on the available CAD geometry and, in many cases, on the entire assembly intact and work fast. Simulation needs to happen at the speed of design!

Altair invites you to the “Ex

Webinars

EikoTwin DIC Top Use Cases

Use cases of EikoTwin DIC by EikoSim.

Use Cases

EikoTwin Aerospace Case Studies

Case studies from Arianegroup and IRT Saint - Exupéry.

Characterization test of a joint test piece launching Ariane 6 in collaboration with Arianegroup.

Compression test on lattice structure with the IRT Saint - Exupéry.

Customer Stories

Compare Model Attributes and Results between Variants and Document/Report Results​

This presentation is by Sagar Rajbhandari, Head of Airframe Models at Airbus.

During the virtual product development process, multiple variants of the product or its components will be created and analyzed. It is required to compare these variants in respect to the model properties and the simul

ATC Presentations

Enhance Aerospace Design Processes And Lower Development Costs with Altair SimSolid

During this webinar, we will showcase a game-changing design simulation technology for structural analysis that can augment and complement established design and PLM processes. Built from the ground up to handle large, complex models, Altair SimSo...

Webinars

Learn How Northrop Grumman Uses Altair Asymptotic EM Solver to Validate Measurement

Join us for this OnDemand webinar, where Northrop Grumman engineer Keith Snyder demonstrates Altair Feko simulations to compare with measured patterns of a slant 45-degree omni directional antenna on a rolled edge ground plane. Advantages of using...

Webinars

Convergence of Engineering and Data Science

The traditional engineering processes ensure that safe and robust products are being developed. However, the growing demand for innovative solutions in short time scales drives the need for a cultural change in the way we work in engineering. Look...

ATC Presentations

Technology-driven Decisions and the Importance of Expertise

Kevin Kirtley, Executive Lead, GE Aviation Advanced Design Tools, discusses how decision making is choosing the correct solution to meet an objective, assessing possible consequences and applying mitigating actions. When driven by technology, mo...

ATC Presentations

Guide to Urban Air Mobility

Urban air mobility (UAM) is a point of convergence for automotive and aviation organizations. This presents opportunities for collaboration between the industries, with air taxis being of particular interest. Intended to transport a few customers ...

Brochures

Optimize Gearbox Oiling to Improving Efficiency and Reliability

nanoFluidX realistically simulates oil flow within various drivetrain components in automotive, aerospace and heavy industries (e.g. manual or automatic gearboxes, differentials, auxiliary aerospace gearboxes etc.).

Use Cases

ATCx Poland 2020 - Aerospace Model Build Tools - Demo

Demonstration with the Altair Aerospace Model Build Tools presented by Arnaud Stauffer, Program Manager Aerospace And Marine, Altair

Presentations

ATCx Poland 2020 - Overview of Altair Aerospace Model Build Strategy

Overview of Altair Aerospace Model Build Strategy presented by Shan Nageswaran, VP, Aerospace, Marine and heavy industry verticals, Altair

Presentations

S-Life Plastics Product Datasheet

S-Life-Plastics is an easy-to-use software that conducts a short-term, long-term and fatigue strength assessment based on FEA results for plastic components made out of unreinforced or reinforced thermoplastic materials.

Datasheets

Altair's 2020 Data Analytics Summit

James R. Scapa brings more than 35 years of engineering experience to his dual role of chairman and CEO of Altair, a title he has held since the company's inception in 1985.

Through Scapa's leadership, the company is now a global technology company that provides software and cloud solutions in th

Presentations

ATCx CFD 2020 - Accelerate Thermo Fluid Systems Design using GE Flow Simulator

Presented at the ATCx CFD 2020. Accelerate Thermo Fluid Systems Design using GE’s Flow Simulator by Aditya Jayanthi, Product Manager, Thermal Solutions at Altair.

Presentations

Antenna Design and Optimization Using Machine Learning

Machine learning is a method of data analysis that automates analytical model building. As the antennas are becoming more and more complex each day, antenna designers can take advantage of machine learning to generate trained models for their phys...

Webinars

Altair for Aerospace

Our simulation technologies develop complex, high-fidelity finite-element models for the predictive virtual testing of airframes, engines, and aircraft interiors.

Brochures

Taking Off with Simulation

New airborne solutions are being developed to accommodate one or more persons for air travel. Explorations including large drones, small helicopters, airplanes, and flying cars will enable companies to respond to the demand for Personal Air Mobili...

Customer Stories

Material Characterization of Continuous Fiber Composites

Availability of material data is a major bottleneck in simulating composite structures. Material suppliers’ datasheets or handbook values do not represent the actual properties resulting from the company’s manufacturing processes. On the other han...

Webinars

Efficient Design Certification Calculations with HyperWorks Integrated Composites Stress Toolbox

In this demonstration, you will learn about efficient design and post-processing of complex laminated composite structures.

Webinars

From Composites Design to production with Altair HyperWorks

Walk Through the Journey of Advanced Composites with Altair

Watch the on-demand recordings and find out how Altair's composites solutions can help you design and analyze structures ready for production.

Webinars

Simulating the Performance of Fiber-Reinforced Injection Molded Parts

In this demonstration we show the full process of manufacturing injection molded parts to component performance in virtual process. The outcome is injection molded parts with desired mechanical performance with minimal experimental testing.

Webinars

Composite Pressure Vessel Design and Simulation

Composite Pressure Vessels (CPV) play an important role in the emerging market for the fuel cell electric vehicles, but there are also numerous more traditional application areas for CPVs. The filament winding process used for the manufacturing of...

Webinars

Efficient Simulation of 3D Printed Lattice Structures

3D printed lattice structures increase the design freedom in areas of the design where, for example, the full stiffness of the material is not needed, or a specific anisotropic material behavior is beneficial. At the same time the high geometric c...

Webinars

Airbus Helicopters Relies on Simulation to Develop Antennas Quickly and Efficiently

Hervé Dutruc, antenna and communication expert at Airbus Helicopters, highlights some of the challenges the company faces for antenna design and installation definition. Airbus Helicopters relies on Altair Feko simulations to support the increased...

Customer Stories, Customer Testimonials

Aircraft Radome Multiphysics Using Simulation

Watch this webinar to see a demonstration of a multiphysics simulation approach using the Altair HyperWorks platform for the analysis of airborne radomes for electromagnetic , structural, aerodynamic, and bird strike performances.

Webinars

Solving Problems in Product Design in Aerospace

Robert Fox, Engineering Associate Fellow at Rolls-Royce presents at the UK Altair Technology Conference 2019.

This presentation provides some background on Rolls-Royce products and how CAE has changed the way in which such complex products are certified as being safe to fly. The presentation then

ATC Presentations

Development of the Next Generation Civil Tiltrotor

Leonardo’s Product Roadmap and the Associated Design Challenges. The Multi-Disciplinary Requirements of Tiltrotor & Other Lightweighting Studies.

This is a keynote presentation from the UK Altair Technology Conference 2019 by David Matthew, Lead Engineer at Leonardo. David joined Westland

ATC Presentations

Blog: Lay-Up Simulations to Choose the Best Fabric Pattern for an Aeronautic Radome

This article focuses on weather radars mounted on small airplanes. They help planning routes before take-off and adapting during the flight depending on weather conditions.

Articles

Energy Finite Element Analysis by MES used to Control Interior Aircraft Noise

With EFEA fewer elements are required compared to FEA, alternative designs can be evaluated rapidly enough in order to influence the design.

Customer Stories

Automating Structural Analysis of Satellites at OHB System AG

Mariana Mendes Leal, Structural Engineer at OHB System AG, talks about how they are able to automate their FE analysis workflow utilizing the Altair HyperWorks suite and tools like Altair’s Automated Report Director.

Customer Testimonials

Big Metal Printing – Realising the Potential of Additive Manufacturing

The South African aviation manufacturing solutions provider Aerosud and the South African Council for Scientific and Industrial Research (CSIR) teamed up to launch a challenging 3D printing project, Aeroswift. Aeroswift collaborated with Altair to...

Customer Testimonials

Big Metal Printing – Realising the Potential of Additive Manufacturing

The South African aviation manufacturing solutions provider Aerosud and the South African Council for Scientific and Industrial Research (CSIR) teamed up to launch a challenging 3D printing project, Aeroswift. Aeroswift collaborated with Altair to...

Customer Stories

Using Math for Post-Processing Aerospace CAE Data

Learn how Altair Compose™ can help you reduce the number of tools required to import data from Finite Element Analysis (FEA), then perform useful post-processing calculations, and visualize the results in useful ways.

Webinars

ESRD StressCheck Aero Wing Flap Video

ESRD StressCheck Aero Wing Flap Fitting Use Case

Videos

Improvement of Aircraft Passenger Seat Comfort Through Biomechanical Models and Numerical Simulation

Zodiac Seats (now Safran Seats) designs, certifies and assembles innovative, customizable and high-added-value products. For optimizing seat ergonomics to reduce passenger discomfort, Zodiac Seats France (ZSFR) employ Altair HyperWorks to develop ...

Customer Stories

Designing for Additive Manufacturing - A South African Case Study

Presented by Nic Minnaar from Altair and Jacobus Prinsloo from Aeroswift, we discuss the value of using topology optimization when designing for additive manufacturing.

Aeroswift's 3D Printer is able to print parts which are up to ten times bigger and print them ten times faster than any other p

Webinars

Simulation, 3D Printing and Casting: The Perfect Symbiosis for Large Aerospace Structures

SOGECLAIR aerospace, part of the SOGECLAIR S.A. group, is a major engineering partner and prime
contractor for the aerospace industry. For the design of an aircraft access door, to leverage the full potential of the combined methods of additive manufacturing and casting, SOGECLAIR used the Altair

Customer Stories, Customer Testimonials

Optimization of Spacecraft Metallic Primary Structure with OptiStruct

Spacecraft primary structure is designed to react all the major loads imparted on a spacecraft. Inadequately designed or tested primary structure can result in structure failure during launch and endanger mission success. To maximize the useful pa...

ATC Presentations
109 Results