Resource Library

Zaha Hadid Presents Innovation in AEC

Eddie Can, Senior Associate at Zaha Hadid Architects, keynote presentation at the 2018 Global ATC in Paris, France.

During his speech Mr. Can will focus on the relationship between highly complex design documents and construction technique that minimize cost while working on a custom and double c

ATC Presentations, Videos

Automotive NVH Development - Past, Present, and Future Technology Challenges

Dr. Per-Olof Sturesson, Senior Director Driving Dynamics and Noise & Vibration Centre at Volvo Cars, keynote presentation at the 2018 Global ATC in Paris, France.

Over the last decades, the utilization of CAE has increased substantially in the vehicle NVH refinement process. Today CAE is a fully

ATC Presentations, Videos

Experimentation Matters: Driving Innovation Through Simulation

Prof. Stefan Thomke, William Barclay Harding Professor of Business Administration at Harvard Business School, keynote presentation at the 2018 Global ATC in Paris, France.

Why do companies constantly come out with exciting innovations while others have great difficulty? Professor Thomke shows tha

ATC Presentations, Videos

The Digitalization Trends and Structural Design in Maritime Industry

Dr. Toshiro Arima, Corporate Officer, Director of Rule Development and ICT Division at ClassNK, keynote presentation at the 2018 Global ATC in Paris, France.

In this presentation, the current state of digitalization of maritime industry, structural rules and evaluation software used for hull st

ATC Presentations, Videos

The World is Built on Engineering

Dr. Uwe Schramm and James Dagg, CTOs at Altair, keynote presentation at the 2018 Global ATC in Paris, France.

This presentation will illustrate the power of Altair’s simulation technology through several practical examples applied to some of the most common product development challenges in aut

ATC Presentations, Videos

Technology as Key Enabler for Product Innovation

Sam Mahalingam, CTO at Altair, keynote presentation at the 2018 Global ATC in Paris, France.

As a technologist I have been following the technology trends and have identified three trends that can immensely change the product innovation landscape and they are: High Performance Cloud Computing, IO

ATC Presentations, Videos

A Motivating, Inspirational Forum for Learning: Thoughts from Attendees at the 2018 Global ATC

Thoughts from attendees express the energy and passion emanating through the exchange of knowledge, information, ideas and stories by technology leaders and industry executives at the 2018 Global Altair Technology Conference.

Video Testimonials

Non-linear Simulation and Optimization

Mechanical Simulation Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

High Frequency Electromagnetic Simulation

In the session there are great presentations from high quality speakers from industry sectors including automotive, aviation, aerospace railway industry, as well research.
A wide variety of applications are covered, from antenna design and integration, to influences of radome structures on such sys

ATC Presentations, Videos

Taking Simulation and Optimization into the Core of Product Design

Simulation-Driven Design Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

New Developments in Technology and Process for Design for Additive Manufacturing

The focus of these presentations address in particular, how to create economic applications by combining new manufacturing technologies and a simulation driven design process.

Leading industry representatives present successful applications of additive manufacturing in combination with ne

ATC Presentations, Videos

Design for the Future of e-Mobility

The global automotive industry is on the verge of disruption with electrification being one of the major trends. In this session we will discuss the challenges and opportunities engineers are facing in the design of the future e-Mobility, includin...

ATC Presentations, Videos

Simulation-driven Design and Manufacturing

Design for Manufacturing seminar held during 2018 Global ATC in Paris, France on October 16, 2018.

ATC Presentations, Videos

Teaching & Learning Simulation Driven Innovation

The focus of this seminar is on teaching and learning Simulation Driven Innovation and Altair's Academic Program. We will hear from academic leaders all over the world on how they are equipping engineering students for their future careers. Join us for an exciting and engaging program.

Pr

ATC Presentations, Videos

Extending the Life of Products with Simulation

Fatigue and Durability seminar held during 2018 Global ATC in Paris, France on October 16, 2018.

ATC Presentations, Videos

Using Altair Compose Calculations & Scripts to Improve and Accelerate CAE Processes

Learn how to use Compose for 0D modeling & simulation, as complementary to 1D and 3D CAE simulations – to perform useful numerical computations; to do parametric modeling; to create scripts; to automate commonly repeated product development proces...

ATC Presentations, Videos

Integration of Optimization into Design with Altair's MDO Offering

CAE has since long been established as the tool for validating and certifying mechanical properties during product development. Simulation-driven design takes simulation and optimization into the creative design process. Primary goal of simulation...

ATC Presentations, Videos

Automated Reporting Director for Structure Analysis at OHB System AG

Seminar held during 2018 Global ATC in Paris, France on October 16, 2018.

ATC Presentations, Videos

Lead Time Reduction in Modeling and Visualization

Seminar held during 2018 Global ATC in Paris, France on October 16, 2018.

ATC Presentations, Videos

Impact Simulation, Safety Analysis and Occupant Protection Strategies in CAE

Crash & Safety Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Electromagnetic Design and Multiphysics Simulation for the Creation of Innovative Products

This technical session focuses on design in electrical engineering, and especially on low frequency electromagnetic simulation. Presentations can be viewed of the latest advances in the Altair simulation solutions - Flux and FluxMotor. Several com...

ATC Presentations, Videos

Multi-disciplinary System Simulation for Model-Based Development

Customers share their success stories illustrating how Altair Model-Based Development technology, and especially Altair Activate™, help them design better products faster. These customers give special attention to simulating multi-disciplinary pe...

ATC Presentations, Videos

Applied Fluid Dynamics, Thermal Management and e-Drive Oiling

Learn how industry leaders are using Altair's CFD solutions to drive innovation in their products and to cope with complex projects.

In the first part thermal management of electric drivetrains is addressed with a multiphysics approach to combine high-fidelity fluid flow and thermal analys

ATC Presentations, Videos

Efficient and Accurate Material Engineering

The focus of the seminar is in introducing Altair Multiscale Designer, a framework for efficient and accurate multiscale modeling and simulation of composite and other heterogeneous materials. The development and validation of multiscale material ...

ATC Presentations, Videos

Concept Design with Altair Inspire

Concept Design with Altair Inspire seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Concept Modelling and Upfront Simulation

Design Review & Styling Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Digital Twin, Predictive Maintenance and In-service Simulation

The Digital Twin and IoT seminar features the key ideas behind the concept of the Digital Twin, predictive maintenance, and its practical relevance especially for product engineering and simulation.

Presentations recorded at the Global ATC in Paris, France on October 16, 2018.

ATC Presentations, Videos

Deep Learning Image Recognition in Engineering Data Analysis

The Digital Twin and IoT seminar features the key ideas behind the concept of the Digital Twin, predictive maintenance, and its practical relevance especially for product engineering and simulation.

Presentations recorded at the Global ATC in Paris, France on October 16, 2018.

ATC Presentations, Videos

Recent and Future Developments in Altair Feko & WinProp

Presentation by Dr. Ulrich Jakobus, Senior VP - Electromagnetic Solutions at Altair.

The presentation introduces the latest features implemented in Altair’s high frequency electromagnetic solvers Altair Feko & WinProp. Application of these features to propagation modelling, antenna design

ATC Presentations, Videos

Assessment of the Electromagnetic Transparency of a Multilayer Radome at High Frequency

Presentation by Gilles Vogt, Inteliance Technologies.

When adding a radome to any network antenna, the transparency of the radome is a major concern, especially when the networks is tightly designed. A very large radome (6m long) has been modeled in Altair Feko (full wave MLFMM) in the GH

ATC Presentations, Videos

Unveiling the Mysteries of the Early Universe with Modern Super Radio Telescopes

Presentation by Nicolas Fagnoni, Cavendish Laboratory, University of Cambridge.

The University of Cambridge and the Cavendish Laboratory are closely involved in the design and development of two new radio-telescopes: the ‘Square Kilometre Array’ (SKA) and the ‘Hydrogen Epoch of Reionizati

ATC Presentations, Videos

Prediction of Magnetic Field Emitted by Train Motor Cables

Presentation by Vincent Ardon, EMC Engineer at ALSTON Tarbes.

Due to the environment, more and more compact with signaling systems functioning from a few dozen of Hz to GHz close to train motors or traction cases, the prediction of magnetic field emitted by motor cables could help train d

ATC Presentations, Videos

Major Antennas Constraints in Helicopters

Presentation by Hervé Dutruc, Antenna and Communication Expert at Airbus Helicopters.

This presentation will highlight challenges faced by Airbus Helicopters for the antenna installation definition, considering the increase of use of composite materials and the increase of frequency for c

ATC Presentations, Videos

First-time-right Design of Matching Circuts for Complex Antenna dn RF Applications

Presentation by Jussi Rahola, CEO of Optenni.

The modern mobile phones and other wireless devices, matching circuits are commonly used to tune the antenna to operate at the desired frequencies and to broaden the operation frequency range of the antenna.

The goal of matching cir

ATC Presentations, Videos

Implementation of Simulation-Driven Design at Leonardo

Presentation by Fabio Angioloini, Airframe Structures and New Technology & Material Lead at Leonardo.

Leonadro Helicopters worked on a huge weight reduction campaign on AW 189 on both metallic and composite structures, as well as on cost reduction trading-off metallic Vs. composite struct

ATC Presentations, Videos

Project Invincible - Advanced Chest Protection

Presentation by James Helliwell, Design Engineer at McLaren Applied Technologies.

In this presentation McLaren Applied Technologies, the advanced technology, innovation, and design company will discuss the background, design process and results of a project to develop a highly bespoke pro

ATC Presentations, Videos

Solving Problems in Product Design in Aerospace

Presentation by Robert Fox, Rolls Royce.

ATC Presentations, Videos

Integrative CAE-Driven Design Process in the Design Phase of a Wood Based Electrified Utility Vehicle

Presentation by Roman Paweł Jędrzejczyk, Virtual Vehicle.

This presentation demonstrates the application of the conceptual design phase to design new wood based vehicle structure for an electrified Utility Terrain Vehicle within the Austrian founded project WoodC.A.R.

ATC Presentations, Videos

Leveraging Advanced Inox Steel Grades and Multi-Disciplinary Optimization Methods to Improve the Performance of Body-in-White

Presentation by Manon Abecassis, Research Engineer at APERAM.

This presentation will detail how stainless steel can be cleverly placed and leveraged to improve the mass / performance / cost ratio of body in white design. The demonstration will rely on intensive usage of simulation and opt

ATC Presentations, Videos

Vehicle NVH Design and Development at Jaguar Land Rover using NVH Director

Presentation by Dr. Andrew Burke, Jaguar Land Rover.

Jaguar Land Rover is integrating Altair’s NVH Director into their Vehicle NVH development process. This will enable the formalization of model requirements and processes, ensuring that vehicle models are built to consistent standards an

ATC Presentations, Videos
140 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!