Resource Library


ATCx Poland 2020 presented by Channel Partner DesArt


Vehicle Dynamics Simulation with ChassisSim

An example of how the optimum car setup is key, on the 2nd round of the 2020 Austrian Grand Prix of Formula 2, the difference between the 1st place and 3rd place in qualify was 0.085s. In an environment where every single point matter, the use of ...

Technical Papers

Monarch Spotlight Series - Data Snacks: Building Models with Data Prep Studio (DPS)

The newest release of Monarch makes it even easier to build or adjust your models using our Data Prep Studio. From our improved engine version to automatically align your messy data to our Hit Map and Report Verify to ensure your data is being cap...


Saving Time and Money with NovaFlow&Solid

Learn how Automotive Components Floby (AC Floby) saves time and money using NovaFlow&Solid.

Customer Stories

AFDEX V20R01 Release Notes

This document talks about the latest changes in the newest version of AFDEX for APA users.


Electric Vehicles Case Study - World Time Attack

Is an all electric time attack challenge contender viable and what would it look like? Find out in ChassisSim's All Electric World Time Attack challenger study.

White Papers

Real-time Risk Monitoring in Electronic Trading Environments with Panopticon

On the buy-side, risk monitoring helps portfolio managers formulate new strategies for assessing performance. On the sell-side, the same tools enable traders and managers to monitor and analyze all aspects of risk throughout the trading day. Regar...

Use Cases

Data-Driven Strategy to Transform Warranty Process

Warranty claims contain valuable information about product quality and reliability, customer expectations, and can reveal design or manufacturing defects. The proper utilization of this data enables manufacturers to make improvements to existing p...


Advance Asset Maintenance Strategies with Predictive Analytics

Predictive maintenance provides a proactive solution to monitor equipment health and predict failures. It enables organizations to avoid machine failures and unplanned downtime, increase equipment and production line productivity, reduce maintenan...


Antenna Optimization & Virtual Test Drive Platform

Next generation vehicles brings increased complexity and a need for more connectivity. Altair Feko™ solution for antenna optimization and Virtual Test Drive platform is the key to developing new products to support connectivity ecosystems. And Alt...


SnR Prevention Start at Concept and Design Phase

If you are a designer, Squeak and Rattle test engineer or a maybe just a beginner to the SnR Analysis world, this presentation is for you. We will showcase how you can benefit from simulation as early as the concept design phase by performing a C...


Integration of Requirements Management with Electric Motor Design

Phoenix Integration is a recently added member of the Altair Partner Alliance. Its product ModelCenter can create complex, fully automated simulation workflows and link these against Model Based Systems Engineering (MBSE) models. These typically d...


Using Altair EDEM for Process Manufacturing

Watch examples of applications of Altair EDEM in the pharmaceutical, food, chemicals and additive manufacturing industries.

EDEM software, powered by the Discrete Element Method (DEM), enables companies to accurately simulate and analyze the behavior of bulk solids, providing key informatio

Use Cases

EDEM simulation of Tablet Coating

The EDEM Application Programming Interface (API) is used to create custom contact models and properties to simulate tablet coating process. The video demonstrates how EDEM can be used as a predictive tool to perform virtual testing and investigate...

Use Cases

EDEM simulation of Die Filling for Pharmaceutical Powders

This video shows the analysis of the feed frame for the die filling process for pharmaceutical powders. EDEM allows the use of colors to differentiate powders by type, velocity and residence time. Additionally, the set-up of bins enables collectin...

Use Cases

EDEM simulation of a Pin Mill

Pin mills are widely used across many industries to comminute bulk solids like chemicals, sugar, herbicides and resins. In this video EDEM is used to simulate and analyze material size reduction in a pin mill, using the Tavares Breakage Model to a...

Use Cases

EDEM simulation of Food processing Extruder

This video was part of a project with Micron, where EDEM was used to model a food processing extruder. Using EDEM software it was possible to simulate how the material turns into a solid under high compression at the extruder nozzle. In addition, ...

Use Cases

EDEM simulation of Powder Dosing Wheel in Additive Manufacturing

In this collaboration with The Barnes Group Advisors, EDEM has been used to get an insight into the functioning of the material delivery system used in an additive manufacturing printer. Two powders with different flowability were characterized an...

Use Cases

EDEM simulation of Powder Mixing in High Shear Granulator

The video presents how EDEM can be used to analyze the mixing efficiency within a High Shear Granulator filled with 10 million particles. In this example, the mixing process of two powders with different particle size is shown. EDEM allows to visu...

Use Cases

EDEM simulation of Hopper Discharge for Powders

This video shows the analysis of the hopper discharge process for powders. EDEM allows coloring the powders by layers, velocity and residence time. Additionally, the set-up of bins enables collecting, extracting and plotting data such as mass flow...

Use Cases

EDEM simulation of Powder Raking in Additive Manufacturing

This simulation models over 8 million particles of less than 0.3mm in size. Large amounts of tiny particles are common in Additive Manufacturing applications. This video shows powder raking and how EDEM tools can be used to analyze voidage, partic...

Use Cases

Automated Machine Learning Streamlines Root Cause Analysis

Root Cause Analysis is critically important to the ongoing success of any manufactured product. Detecting design defects, raw material problems, build issues, and quality control shortfalls as early as possible fosters continuous product improveme...


EDEM simulation of Tablet Compaction

In this video EDEM is used to simulate and analyze a tablet compaction process, using the Edinburgh Elasto-Plastic Adhesion contact model (EEPA) to capture the complex behavior of the powders. EDEM enables users to obtain key micro-mechanical info...

Use Cases

EDEM simulation of Screw Auger handling Powders

This video compares the behavior of two different powders in a screw auger – one of the powders being highly cohesive and the other one free flowing. EDEM provides key insight into the discharge of the hopper, the compressive force acting on the p...

Use Cases

EDEM simulation of Wet Mixing - Liquid Transfer in a Drum Mixer

In this example, EDEM’s Application Programming Interface (API) can be used to introduce custom physics to the simulation, allowing particles to have a liquid content. Here, particles with a water content are added into a mixer containing powder. ...

Use Cases

The Next Level of AI in Science Powered by NVIDIA GPUs

NVIDIA's Dr. Dai Yang and Michael Liebenthron discuss the next level of artificial intelligence and simulation in science with the DGX A100, the world's first AI system built on the NVIDIA A100 Tensor Core GPU.

ATC Presentations

The US Exascale Project Software Stack: Why It Matters to You

Sandia National Laboratories' Michael Heroux, director of software technology for the Exascale Computing Project (ECP), discusses the DOE's roadmap to exascale and the focus area of ECP software technology.

ATC Presentations

Hierarchical Scheduling for High-throughput Computing Workloads

Jérémie Bourdoncle, senior director of enterprise computing core development at Altair, talks about the benefits of hierarchical scheduling for high-throughput computing with Altair PBS Professional 2020.

ATC Presentations

Budgeting, Allocation Management, and Workload Simulation

Altair's Ian Littlewood, product manager for enterprise computing core development, talks about budget allocation and workload simulation in the new PBS Professional 2020.

ATC Presentations

HPC Virtual Summit 2020 Cloud Roundtable

Is Cloud Officially Inevitable? Experts from Azure, Oracle and Google get candid about 2020's biggest cloud computing trends and challenges.

ATC Presentations

Bringing Cost as Close as Possible to Exact Demand

"Watch your money," says Altair chief scientist and Runtime founder Andrea Casotto, explaining how Rapid Scaling can bring the cost of your cloud computing as close as possible to exact demand.

ATC Presentations

Altair Weather Solution featuring PBS Professional and Cylc

NIWA's Dr. Hilary Oliver, inventor of the Cylc engine for cycling workflows, joins Altair's David Block and Ashish Singh to share details about the Altair Weather Solution featuring PBS Professional and Cylc.

ATC Presentations

Design Flow Mapping and Optimization: The Tool Every VLSI Team Needs

Altair enterprise computing core development director Stuart Taylor discusses design flow mapping and optimization for VLSI and demonstrates Altair FlowTracer.

ATC Presentations

Cloud Bursting: State of the Art GUIs for Seamless Scaling

Altair's EMEA enterprise computing director, Chris Townend, and product manager, Ian Littlewood, team up to talk about adopting HPC in the cloud and making it simple for users and administrators.

ATC Presentations

PBS Professional 2020.1 Intro

PBS Works CTO Bill Nitzberg gets excited about the all-new PBS Professional 2020.1 with new features including cloud bursting, forecasting and simulation, budgeting and accounting, and hierarchical scheduling.

ATC Presentations

How PING Golf Stays Ahead of the Innovation Curve with Altair HPC Appliance Powered by the Lateset Intel Xeon Processor

Eric Morales, senior engineer at PING Golf, talks with Altair's Rick Watkins about innovating in equipment design using the Altair HyperWorks Unlimited appliance.


Saving Serious Money with License-first Scheduling

Altair's Stuart Taylor, director of enterprise computing core development, gives you an inside look at the license-first scheduling strategy the world's top technology companies use to increase the amount of high-performance, high-throughput compu...

ATC Presentations

Second Generation AMD EPYC Processors Speed Up Altair Radioss Crash and Multiphysics Simulations

Join Altair Radioss development and HPC solver VP Eric Lequiniou to find out how AMD EPYC processors speed up crash and multiphysics simulations with Radioss.

ATC Presentations

Mastering Data in Higher Education

Despite recent advancements in technology, the education sector has struggled to capitalize on opportunities afforded by data analytics.


Altair HyperStudy™ - General Working Process

Altair HyperStudy is a multi-disciplinary design exploration software helping engineers to improve their designs. This video presents the general working process.

2781 Results