All Tutorials
Learn more about
  • Training Materials







  • Tutorials


  • Filter by






PollEx PCB Modeler for PCB Design Review

Get started with PCB Modeler, easy-to-use and collaborative application, central application of PollEx with unsurpassed connectivity to major ECAD systems, to quickly visualize and review PCB designs without losing any ECAD design data.

Tutorials

PollEx CP for PCB Design Comparison

Get started with PollEx CP, part of PollEx Suite, to easily and automatically compare different PCB designs and revisions, including schematics, layouts and BOM and with the possibility to export comparative reports with the results

Tutorials

PollEx PCB Verification for Design for Manufacturing (DFM)

Get started with PollEx Verification for DFM, where PollEx’s rule-based DFM checking tool covers the manufacturing areas of board, component, drill, FPCB, package, pad, presence and size of masks for manufacturing equipment, pattern, optimization of via annular ring, placement and tooling and PCB space.

Tutorials

PollEx PCB Verification for Design for Assembly (DFA)

Get started with PollEx Verification for DFA, where PollEx’s rule-based DFA checking tool covers the manufacturing assembly areas of collision, lead, soldering, placement, component height, component and board, stability.

Tutorials

PollEx PCB Verification for Design for Electrical Engineering (DFE)

Get started with PollEx Verification for DFE, where PollEx’s rule-based DFE checking tool covers the electrical areas related to SI, PI, EMI and ESD including high speed signals, differential pairs, common nets, power filters, stub, antenna ground, return path, shielding for net or component, routed copper area, components and boards.

Tutorials

Rapidly Improve Your Product's Design Using Altair Inspire with SimSolid Integration

Inspire's award winning user experience for geometry creation and modification can be learned in just a few hours, and delivers dependable Altair solver power. Structural analysis with SimSolid's speed and accuracy - as independently validated by NAFEMS - provides the ability to analyze large assemblies and complex parts.

Tutorials, Use Cases

Inspire Studio How-To Series: Designing a Measuring Cup

In this Inspire Studio How-to Series we'll be designing a measuring cup. Each video shows a different step in the design process.

Tutorials, Use Cases

Inspire Studio: Designing a Measuring Cup, Part 1

In this episode of the Inspire Studio How-to Series, we'll be designing a measuring cup, starting from creating the proper bounding box and importing an image plane for reference.

Tutorials, Use Cases

Inspire Studio: Designing a Measuring Cup, Part 2

In this episode of the Inspire Studio How-to Series, we keep designing a measuring cup, making a few quick edits and learning how to use tools like sweep, patch, trim, and more. Learn more and get a free trial license at altair.com/inspire-studio.

Tutorials, Use Cases

Inspire Studio: Designing a Measuring Cup, Part 3

In this third episode of designing a measuring cup, we focus on shelling the main body, use lattice to quickly morph the entire shape, and create a handle in very few clicks. Learn more and get a free trial license at altair.com/inspire-studio.

Tutorials, Use Cases

Inspire Studio: Designing a Measuring Cup, Part 4

In the fourth episode of designing a measuring cup, we complete the shape adding rounds, seam lines, and getting ready to render the final product. Learn more and get a free trial license at altair.com/inspire-studio.

Tutorials, Use Cases

Inspire Studio: Designing a Measuring Cup, Part 5

In the fifth and last episode of designing a measuring cup series, we finalize the design and create some photorealist renderings of the product, selecting and customizing materials from the library and editing the environment. Learn more and get a free trial license at altair.com/inspire-studio.

Tutorials, Use Cases

Inspire Studio How-to Series: Sweep and Loft

A short clip showing how easy is to create smooth and continuous NURBS sweep and loft surfaces in Inspire Studio. Learn more and get a free trial license at altair.com/inspire-studio.

Tutorials

Inspire Studio Hair Dryer Tutorial Part 1

In this tutorial, the main body curves and initial surfaces will be created for the hair dryer.

Tutorials

Inspire Studio Dryer Hair Dryer Tutorial Part 2

In this tutorial, additional surfaces are created and edited to create the remaining parts of the hair dryer.

Tutorials

Inspire Studio Hair Dryer Tutorial Part 3

In this tutorial, geometry is created to use as construction geometry for editing the surfaces of the hair dryer.

Tutorials

Inspire Studio Hair Dryer Tutorial Part 4

In this tutorial, the geometry will be modified to complete the details for the body of the hair dryer.

Tutorials

Inspire Studio Hair Dryer Tutorial Part 5

In this tutorial, the hair dryer geometry is set up for rendering by applying materials, setting up an environment, and adding lights.

Tutorials

e-Motor Concept Optimization Coupling with Altair FluxMotor and Altair HyperStudy

Designers starting with a blank page face an unlimited number of configurations and need to quickly select machines types. By coupling Altair FluxMotor to Altair HyperStudy design exploration and optimization solution, Altair offers designers a unique process to optimize their motor concept at an early design stage, defining their constraints and their objectives. A typical objective is to reach maximum global efficiency across a given duty cycle. Then, designers can select and focus on the topologies that fulfill the main specifications before going further in their design.

Tutorials, Videos

Altair Embed Digital Power Intro

Introduction playlist to Altair Embed digital power

Training Materials, Tutorials

Buck Converter Series

Playlist on Buck Converters with Altair Embed

Training Materials, Tutorials

PMSM Series

Altair Embed playlist-PMSM

Training Materials, Tutorials

Controlling LED's Playlist

Playlist on controlling LED's with Altair Embed

Training Materials, Tutorials

Embed Plot Blocks Series

Playlist on Plot Blocks with Embed

Training Materials, Tutorials

Delays, Counters, & Discrete Integrators Playlist

Playlist on delays, counters, & discrete integrator with Altair Embed

Training Materials, Tutorials

Fixed Point Series

Fixed point playlist with Altair Embed

Training Materials, Tutorials

Signal-Based Modeling Playlist

A playlist on signal-based modeling

Training Materials, Tutorials

Altair Embed Arduino Series

Embed playlist on Arduino

Training Materials, Tutorials

Embed Drone Control Series

Playlist on Altair Embed-Drone control

Training Materials, Tutorials

Embed Salient PM Motor Control Series

Playlist on Altair Embed Salient motor control

Training Materials, Tutorials

Unit Delay, Pulse Counter, and Discrete Integrator

Use of the Unit Delay, modeling a pulse counter, and modeling a discrete backwards rectangular integrator.

Training Materials, Tutorials

Discrete Reset Integrator, Merge, & CrossDetect Blocks

Understanding the Merge and CrossDetect blocks, adding an Embed model to the Embed MenuBar, modeling a discrete reset integrator.

Training Materials, Tutorials

Fixed Point - Fundamentals Part 1

Description and use of fixed point blocksets, block properties, blockset configuration tool and displaying fixed point overflow messages and watermarks.

Training Materials, Tutorials

Fixed Point - Fundamentals Part 2

Application of fixed point autoscale feature and attributes of automatically generated fixed point C-code

Training Materials, Tutorials

Fixed Point - Filters

Use of the transfer function block and filter design option to design, discretize and implement a second order low pass filter. Adjusting the discrete stepsize and fixed point format for acceptable performance are covered.

Training Materials, Tutorials

Controlling LEDs - Basics

Blink the red LED on a Texas Instruments F28069M LaunchPad board at 0.5Hz. The model is expanded to blink the red and blue LEDs alternately at 0.5 Hz and then at 10Hz.

Training Materials, Tutorials

Controlling LEDs - Frequency Controlled

Example of host-to-target communication to blink the red LED on the target Texas Instrument F28069M LaunchPad Development Kit using an Embed slider block.

Training Materials, Tutorials

Controlling LEDs - Frequency Controlled With "On Time" Measurement

Host-to/from-target communication to blink the red LED on the Target Texas Instrument F28069M LaunchPad Development Kit

Training Materials, Tutorials

Compound Blocks - Basics

Create compound blocks to add levels to your model; navigate through your model; add/remove compound block connector pins; use compound block dialog constants and dialog windows; access and use built in variables

Training Materials, Tutorials

Compound Blocks - Advanced

Discussion of two compound block features; Enabled Execution and Local Time Step. Additionally, the Local Time Step feature is applied to implement the block diagram equivalent of a "For" loop to iteratively solve a nonlinear implicit equation.

Training Materials, Tutorials

Oscilloscope Display Using Monitor Buffer

High speed data collection using the EMBED Monitor Buffer Read and Write blocks, using the plot block to display Monitor Buffer data, displaying the % CPU usage using the Target Interface Block, and controlling the Target update time.

Training Materials, Tutorials

Plot & Buffer blocks

Creating vectors using the Embed “buffer” block, and configuring and using the “plot” block to display “buffer” data.

Training Materials, Tutorials

Digital Power Buck Converter Control

Voltage Mode Control

Training Materials, Tutorials

Texas Instruments CCS Software Installation

Step by Step instructions to install the Texas Instruments Code Composer Studio and Uniflash software on your computer.

Training Materials, Tutorials

Furuta Inverted Pendulum Control

Apply the Model -Based Development process to the design, test, and HIL testing of a swing up and balance controller for the Furuta inverted rotary pendulum.

Training Materials, Tutorials

Add a Model to the Embed Menubar

A binary hysteresis model is developed and simulated. The model is added to the Embed Menubar under a new menu named MyModels.

Training Materials, Tutorials

Encoders

Configure and read a US Digital S4T 4 wire quadrature incremental encoder connected to a Texas Instrument F28069M LaunchPad board.

Training Materials, Tutorials

Digital Power - Simulation Blockset overview

Brief overview of the simulation blockset of the Digital Power Designer. In this video we look into and analyze a selection of bocks used for simulation (Compensators, PWM simulation, Voltage Mode Control simulation, Buck Converter).

Training Materials, Tutorials
1 2 3 4 5 Next
Have a Question? If you need assistance beyond what is provided above, please contact us.
Loading...