Resource Library

Optimize Medical Stents with Machine Learning

Medical stents are a lifeline for patients with cardiovascular illness and disease. Device manufacturers are required to dedicate large amounts of time and expense to clinical tests to validate safety and performance claims. Simulation can speed u...

Webinars

Powerful and Easy-to-Use Solution for Bolted and Screwed Joint Analysis

Cobra addresses complex bolted and screwed joints with critical safety and security issues. The software enables designs to be tested quickly and rigorously to prevent failures and extend service life, in line with the VDI2230 standard. In contras...

Webinars

Training - CFD-Thermal Analysis Of Complex Systems Using SimLab ST

This is an introductory session on SimLab for CFD and multi-physics simulation using Acusolve. A combination of lectures and exercises explain the modelling and physics setup of for complex assemblies. Leveraging on Altair Structural (OptiStruct)...

Training Materials, Webinars

Reduce Time-to-Market Using Rapid Design Iteration

One of the biggest challenges in the consumer electronics industry is reducing the time-to-market given the highly competitive landscape and there is a stronger emphasis on virtual simulations over physical prototyping. However, performing virtua...

Webinars

Harness The Power of Machine Learning While Building Trust Using Explainable Predictive Analytics

This presentation is about making machine learning models and their decisions interpretable, and why it's important and valuable.

Videos, Webinars

Achieve Battery Thermal Management System Requirements using Altair CFD Solutions

The operating temperature of Li-ion batteries used in modern electric vehicles should be maintained within an allowable range to avoid thermal runaway and degradation. Poor thermal management affects the charging and discharging power, cycle life,...

Webinars

The Benefits and Hurdles of Using Shot Sleeve Simulation: A Case Study of a BMW Clutch Housing

The casting process simulation, as a tool to detect and eliminate problems in the die casting process and possible defects in the cast parts at an early stage, can be further improved by considering the processes in the shot sleeve. This will be i...

Webinars

Electromagnetic Solutions for Accelerated Product Development of Aerospace and Defense Systems

In this webinar we showcase Altair’s unique electromagnetic simulation solutions combining antenna design and installed antenna performance with radio coverage analysis, including virtual flight and drive tests. We also cover our new leading solut...

Webinars

FEA Analysis for Faster and More Accurate Shipbuilding

An Introductory webinar to MAESTRO, a design, analysis, evaluation and optimization tool specifically tailored for floating structures now available through the Altair Partner Alliance.

MAESTRO is a design, analysis, evaluation and optimization tool specifically tailored for floating structures,

Webinars

Enhancing Product Design for Medical Devices

Medical devices of all kinds must be designed to withstand the structural and operational requirements associated with normal use, drop, and misuse, all while balancing weight and cost considerations.

This webinar presents Altair’s workflow to enable simulation of structural, thermal, and fluid p

Webinars

Self Service Data Transformation In The Federal Government: A Look At Criminal Investigation, Accounting, and Maintenance Analytics

Explore how Altair’s self-service data analytics platform enables federal authorities to access, generate, and use smart data to make insightful, informed decisions. We’re joined by our Solution Specialist to see how different federal government d...

Videos, Webinars

Leveraging Disruptive Technology in Structural Simulation to Address Economic Challenges in the Oil and Gas Industry

The oil and gas industry is no stranger to challenges. In today’s world, the challenges come from an extremely competitive energy market, the growth of renewable energy, the increasing demand for minimizing the environmental footprint, and most re...

Webinars

New Simulation Strategies to Slash Architectural, Engineering & Construction Project Timing and Costs

Leading design firms join Altair to discuss high-fidelity simulation solutions for all experience levels to realize efficiency gains up to 40%.

Today, architectural design firms face two primary and often conflicting challenges: increased project complexity and compressed delivery schedules. Due

Webinars

How To Achieve Optimized Trading Analytics

In this webinar, we discuss the benefits of analyzing intraday trading risk and performance, the downsides of waiting for end-of-day reports, and the challenges associated with building and using risk compliance dashboards that traders and complia...

Webinars

Multiphysics Simulation of Electrical Rotating Machines and Next Gen Design - Rotating Machinery

This workshop will showcase a process-oriented multidisciplinary simulation environment to accurately analyse the performance of complex rotating machines. The participants would learn about multiple physics analysis of motors; including electroma...

Webinars

National Level Webinar on Simulation Driven Innovation for e-Mobility

The seminar showcases best practices in simulation-driven innovation process for design, verification and validation of e-Mobility solutions to myriad Electrical and Electronics components.

Webinars

Online Workshop - Simulation-Driven Innovation for e-Mobility

Simulation-Driven Innovation for e-Mobility with SRM university

Webinars

Training - Systematic approach for NVH Problem solving Techniques

Training - Systematic approach for NVH Problem solving techniques - 290520

Webinars

Training - Systematic approach for NVH Problem solving Techniques

Training - Systematic approach for NVH Problem solving techniques

28/05/2020

Webinars

Training - Systematic approach for NVH Problem solving Techniques - 02

Training - Systematic approach for NVH Problem solving Techniques - 26/05/2020

Webinars

Training - Systematic approach for NVH Problem solving Techniques

A systematic approach for NVH Problem solving techniques - 25/05/2020

Webinars

Plate Forging Simulation Using AFDEX

Plate or sheet forging technology has been become more popular because companies are aiming to meet the global requirements to save the environment. It has been known that plate forging itself is competitive for thin parts in terms of quality and ...

Webinars

Collaborative MBSE Product Development with XLDyn™

Collaborative Product Development using a Model Based Systems Engineering (MBSE) methodology can be done without using multiple complex and non-integrated software applications. In this webinar, we will show how product development activities can ...

Webinars

Get Full Control Over Your Paint Shop Processes to Drive Down Cost and Accelerate Manufacturing

An Introductory webinar Alsim PAINT SHOP and Alsim MERGE by ESS Engineering Software Steyr GmbH.

Alsim PAINT SHOP allows you to get full control over the most expensive process in the automotive industry. It includes a unique simulation tool allowing to accurately detect air bubb

Webinars

Demystifying Data Science: Predictive Modeling

What is Predictive Modeling?  Why is it useful?  How do you leverage Predictive Modeling in a practical sense for your business? 

Users will end this session with a better idea of how they might be able to apply predictive modeling to their own potential use cases.

In this webinar, we explore,

Webinars

Amphyon 2020 Update Webinar

Introduction to new features and use-cases of Amphyon 2020

Webinars

Altair Monarch Skill Spotlight Series - Advanced Data Prep

Taking you beyond simple column operations and transformations, the Advanced Data Prep module explores how to recreate complex manual tasks in a repeatable fashion. Being familiar with these skills will allow user to address complex data transform...

Presentations, Training Materials, Webinars

How to Optimize Vehicle Energy Balance through Smart Hybrid Controller Layout with AVL CRUISE™ M

Hybrid Electric Vehicles (HEVs) combine the best of two worlds: a long range possible through an internal combustion engine and lower consumption and emissions through electrification. These advantages can, however, only be achieved if the complex...

Webinars

Webinar - Optimize Usage and Save on your Engineering Software License Costs

Optimize Usage and Save on your Engineering Software License Costs

Webinars

Online Workshop - Electromagnetic and Thermal Simulation of PMSM (IPM) Motor

Electromagnetic and Thermal Simulation of PMSM (IPM) Motor

Webinars

The Altair Enlighten Award 2020 - Winners & Highlights Webinar & Panel Discussion

Are you an automotive lightweighting pioneer? Do you have a vehicle, module, system or technology that is driving down the weight of today’s vehicles, or could do so in the future? Are you interested in learning how to become the next lightweighting champion?

Meet the Winners! Industry pioneers

Webinars

Altair Monarch Skill Spotlight Series: Basic Data Prep

Basic Data Prep covers the most simple changes that can be made after the data has been extracted from Report Design. Once data is brought into the prepare window, it can be manipulated further while creating a repeatable and effective process. Ma...

Presentations, Training Materials, Webinars

Training - Simulation Driven Design & Manufacturing For Sheetmetal Components Using Altair Inspire Form & Structure

Simulation Driven Design & Manufacturing For Sheetmetal Components Using Altair Inspire Form & Structure

Webinars

Training - Simulation Driven Design & Manufacturing For Casting Components Using Altair Inspire Cast & Structure

Simulation Driven Design & Manufacturing For Casting Components Using Altair Inspire Cast & Structure

Webinars

Training - CAD Based Parametric Optimisation Using SimLab St & HyperStudy

CAD Based Parametric Optimisation Using SimLab St & HyperStudy

Training Materials, Webinars

Training - Save Costs by Moving Non-Linear Physics Loadcases to Altair OptiStruct

Save Costs by Moving Non-Linear Physics Loadcases to Altair OptiStruct

Webinars

Training - Rated Torque Simulation of IPM Motor Using Altair Flux

Rated Torque Simulation of IPM Motor Using Altair Flux

Webinars

Training - Mechanism Design & Analysis Using Inspire

With Altair Inspire Motion we can link components of a mechanism together using various types of joints and contacts to simulate the real-world connections in an assembly.

Webinars

Training - Nonlinear Static & Dynamic Analysis With Pretension Effects Using OptiStruct

Nonlinear Static & Dynamic Analysis With Pretension Effects Using OptiStruct

Webinars

How Whirlpool Evaluates and Validates Concepts in Minutes with Altair SimSolid

In this webinar, Alexandre Luis Marangoni, Senior CAE Engineer at Whirlpool Corporation discusses how they validated SimSolid against FEA solver results, then implemented the tool into their concept design processes.
SimSolid is used at Whirlpool to quickly evaluate concept feasibility, answer crit

Webinars
479 Results