Resource Library

Introduction to TracePro by Lambda Research Corporation

An Introductory webinar to TracePro, a powerful illumination and non-imaging optical design and analysis program with an easy-to-use graphical interface. Its solid modeling, Monte Carlo ray tracing, and optimization features make it a versatile to...

Webinar Recordings

How to Facilitate the Strength Assessment of Your FEM Results

S-Life FKM is a software that enables an easy and automatic assessment of FEM simulation results according to the German FKM guideline. The FKM guideline is a comprehensive German guideline with approx. 230 pages describing the static and fatigue ...

Webinar Recordings

Improving E-Motor Acoustics with Seamless Multiphysics Simulation

Discover Altair SimLab's automated workflow for coupled electromagnetic and vibration analysis

Webinar Recordings

Vibro-Acoustic Response of Multi-Layer Systems: Creating a Condensed Model to Reduce Mesh Size and Calculation Time

A possible way of reducing the calculation time and mesh size in vibro acoustic response is to condense the description of multi-layer plates into a single, equivalent plate representation. The plate is then modeled using frequency dependent param...

Webinar Recordings

Introducing Altair SimLab sT

Analyzing full-featured parametric CAD assemblies is an extremely labor intensive process requiring skilled CAE expertise. Common practices to shorten simulation cycles have included simplifying and defeaturing CAD geometry – offering little “engi...

Webinar Recordings

Think, before specifying the same materials! Best practices in materials assignment

This webinar demonstrates how to consider all material options and quickly identify the right one for your application before starting simulation work. Reduce modeling iterations and, ultimately, deliver better products and competitive advantage.

Webinar Recordings

How to Overcome Obstacles During the Development Process of Touch Applications in the Automotive Industry, Using a Specialized Software Solution

Automotive companies involved in touch sensor development, from material suppliers to OEMs, are currently facing three major issues: Too many iterations, strict automotive regulations as well as slow and expensive prototyping. In this webinar, we'...

Webinar Recordings

Introduction to S-Life by PART Engineering

An introductory webinar to S-Life FKM, a static and fatigue strength software for the assessment of FEA results according to FKM guideline. S-Life FKM is a software that enables an easy and automatic assessment of FEM simulation results according ...

Webinar Recordings

Altair Flux: Using Multiphysics Optimization to Design High Performance Rotating Machines

Light-weight, low cost, compact, high efficiency are some of the many objectives and constraints that have to be considered when designing a rotating machine.

To meet these various challenges it is necessary to take into account several physical aspects:

- electromagnetic
- structural
- ther

Webinar Recordings

Altair Flux: Considering Temperature Constraints in the Design of Electric Machines

Because of always more compact and high efficiency systems, temperature is a critical constraint in electric machine design.

Depending on the design stage, different levels of modeling can be proposed:

- 1D for fast pre-design, to
- full 3D CFD models for the validation stage.

This present

Webinar Recordings

Designing for Additive Manufacturing - A South African Case Study

Presented by Nic Minnaar from Altair and Jacobus Prinsloo from Aeroswift, we discuss the value of using topology optimization when designing for additive manufacturing.

Aeroswift's 3D Printer is able to print parts which are up to ten times bigger and print them ten times faster than any other p

Webinar Recordings

Altair Flux: Fast Assessment and Optimization of the Energy Efficiency of Electric Machines

In the early stage of the design of an electric machine, it is key to assess its potential in terms of global energy efficiency when submitted to specific duty cycles.

This presentation will show how:

- FluxMotor is able to extract efficiency maps in a very fast way.
- FluxMotor can be coup

Webinar Recordings

Smart IoT Solutions Presentation

Today, it is a challenge to manage and analyze IoT devices and the incoming data as the value increases exponentially. Through our unique combination of innovative IoT technologies we enable companies to reach new heights. Altair SmartWorks is a b...

Webinar Recordings

Processing CAE Data via Advanced Mathematical Scripting

High level, Matrix-based Numerical computing language & unified programming environment for all types of math from solving matrix analysis, differential equations signal analysis and control systems. It is an integrated HyperWorks post processing ...

Webinar Recordings

Webinar: Optimization of Oil and Gas Piping Systems with DSHplus

In this webinar ‘RohrLEx’, FLUIDON piping expert, explains the relationship between pressure pulsations and pipeline problems and the advantages in using differently specialized software for this process of optimization. So, he presents both an a...

Webinar Recordings

Join the Simulation Revolution: Introduction to Altair SimSolid

SimSolid is a game-changing simulation technology for designers and design engineers. SimSolid accelerates product exploration with highly accurate engineering simulation:

-Analyze complex assemblies in seconds to minutes
-Simulate more, prototype less
-Predict product performance for better de

Webinar Recordings

Meet Altair's New Tool for Electronics Cooling

In this webinar, discover all the new features in the first release of ElectroFlo under the HyperWorks platform.

Altair ElectroFlo is designed exclusively for challenging electronics cooling and design applications. It is a thermal package capable of solving problems involving conduction, natura

Webinar Recordings

Webinar: Multi-scale Co-simulation and Model Integration with CosiMate and Flux

This webinar presents how to co-simulate and integrate models created with different state-of-the-art tools at the system level. Co-simulation is an industry-proven robust way to implement Multiphysics analysis. It replaces advantageously lengthy ...

Webinar Recordings

Webinar: Lay-up Simulations to Choose the Best Fabric Pattern for an Aeronautic Radome

This webinar is about simulating the draping of the radome with different fabric pattern and choose the best. The choice of the best pattern will be based on the draping results, the fabric aspect, the fiber orientation, and if possible, on electr...

Webinar Recordings

Webinar: Workflow Integration of Total Materia in the HyperWorks Environment

This webinar presents a detailed look at how Total Materia can be used to decrease risk and increase efficiency as an integrated tool within the Altair environment. Focusing on two main integration and connection possibilities, the webinar will sh...

Webinar Recordings

System Simulation and Control: Improve the Overall Performance of your Mechatronic Systems using Altair Activate™

Discover a highly robust approach to simulate the performance of your entire product; assess the overall behavior of the multi-disciplinary system in the form of 0D, 1D and/or 3D models.

Webinar Recordings

Fast and Accurate Design of Electromagnetic Devices with Flux and FluxMotor

Altair Flux is a leading finite element simulation software for electromagnetic modeling. Used for more than 35 years in industry worldwide, and based on the most advanced numerical techniques, Flux has become a reference for the high accuracy it delivers.

Altair also recently introduced Altair F

Webinar Recordings

Altair Multiscale Designer Webinar: Taking Material Modeling to the Next Level

Multiscale modeling of composite materials has become a viable solution to reduce the amount of physical testing needed for accurately material characterization and to better assess the nonlinear material behavior and failure mechanisms in structural analysis.

Whether you are working with high-pe

Webinar Recordings

Altair ESAComp: A Powerful Toolbox for Classical Composite Analysis

Find out how Altair ESAComp enhances the capabilities of the Altair HyperWorks platform by providing classical analyses of structures made of layered composites. Altair ESAComp is used from preliminary and detailed design phases to advanced analys...

Webinar Recordings

First-Time-Right Laser Beam Melting with Additive Works’ Amphyon

This webinar will present the current state of the Amphyon software including the new Support Module and how the pre-processing for Laser Beam Melting processes will be tomorrow. The web presentation includes a speech about the needs for software,...

Webinar Recordings

Mechatronic System Design

This webinar outlines how 1D block diagrams can be successfully combined with 3D non-linear multibody systems for model based development of mechatronic systems. Examples include an active suspension systems and a robotics application.

Webinar Recordings

Introducing the Next Generation Manufacturing Simulation Solutions on Altair Inspire™ Platform

Altair manufacturing simulation tools have received an extensive amount of development efforts to expand their simulation capabilities.

Webinar Recordings

Solving Your Most Difficult Modeling Problems with Altair SimLab™

Altair SimLab is a process-oriented modeling software with the features and flexibility to address the complex needs of simulation teams. This webinar covers how Altair SimLab 2018's streamlined workflows and feature capabilities can address commo...

Webinar Recordings

Accelerate Your Product to Market with Simulated Testing

This webinar will address many aspects of the Altair Startup Program including Altair's services, IoT and connected products, the Altair solution portfolio, and customer success stories.

This webinar was recorded on August 2nd, 2018.

Webinar Recordings

SimLab for CFD and Multiphysics Webinar

This webinar shows Altair's streamlined thermal fluid-structure interaction workflow for powertrain components.

Leveraging Altair's CFD and structural analysis solvers, SimLab now offers a streamlined workflow that enables pre-, solver, and post-processing for thermal FSI within a single interfac

Webinar Recordings

Discover the NEW features of Click2Cast 4.1

This webinar will highlight and feature:

Adding/removing/modifying a material using the New Material Editor.
Adding a coating to a mold and setting up the parameters.
Predicting micro porosity using the NIYAMA criterion.

Webinar Recordings

The Benefits of Designing Medical Devices with Topology Optimization and Additive Manufacturing

The additive manufacturing industry continues to grow as serial manufacturing applications across many sectors are realized. Topology optimization and generative design software further exploit the benefits and capacity of additive manufacturing b...

Webinar Recordings

Leverage the Power of Simulation-Driven Design

In order to stay competitive while pushing the envelope on innovation, simulation must drive the entire design process from the early concept design phase all the way to production. Leveraging robust simulation—including motion analysis, finite el...

Webinar Recordings

The Complete Design for Additive Manufacturing and 3D Printing Toolchain

To successfully take advantage of the benefits of 3D printing and additive manufacturing, a new design and simulation process must be used. It is not beneficial to simply ‘print’ a current design. New tools and advanced computational power have en...

Webinar Recordings

Model-Based Development of Mechatronic Products

Learn how next generation math and system design products can be applied right from concept studies, control design, multi-domain system performance optimization to controller implementation & testing.

Webinar Recordings

Webinar: Friction Stir Welding Simulation Using Virfac® Capabilities, Workflow & Live Demonstration Components

The webinar will be a live demonstration of our FSW module, from CAD import to solver launch. VIRFAC FSW predicts temperature contours in the welded zone, power dissipation, and the sliding ratio on the interface between the shoulder and the workp...

Webinar Recordings

Webinar: Visualization, Quantification of Metal Flow Lines and Its Application to Process Design Optimization

In this webinar, the AFDEX patented technology where metal flow lines are quantified, will be discussed with relevant examples from the industry. Quantification of metal flow lines will pave way to using these flow lines as parameters in optimizat...

Webinar Recordings

Webinar: Motorsport to Automotive: Using ChassisSim to Design an Electric Drive Train for Automotive Use

This webinar demonstrates how the ChassisSim electric powertrain module, that is being used in anger in Formula E, can be applied to road car use. In particular, it will show you how you can effectively and quickly use this to specify what you ne...

Webinar Recordings

Pre and Post-Processing for Aerospace

This webinar gives an overview of HyperWorks’ aerospace solution for model-setup, composites modeling and efficient reporting. The popular matrix browser for easy data extraction and advanced post-processing is also covered.

Webinar Recordings

FEKO Webinar: Design of a Two Port Dual-Polarized Trefoil Torus Knot Antenna using Characteristic Mode Analysis

r S Vinoth Kumar from Indian Institute of Technology Kanpur received an honorable mention in the 2017 Competition for his entry.

Knots find interesting applications in various field of electromagnetics. In Mr Kumar’s work a dual-polarized knot antenna is designed and optimized completely using fe

Webinar Recordings
223 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!