Resource Library

Additive Manufacturing Design

Jason Lopes, Production Development Engineer at Carbon, presents at Converge 2017 in Los Angeles, California.

ATC Presentations, Videos

Bend-It – Rethinking Customized Orthopaedic Devices Using Additive Manufacturing

Dustin Ahrendt and Felix Schmitt from Technische Universitat Dresden present at Converge 2017 in Essen, Germany.

ATC Presentations, Videos

Lattice Optimized Brake Pedal Study

The following presentation reviews the design and development of a Lattice Optimized (LO) automotive brake pedal. The goal of the study was to compare the potential weight savings from utilizing a lattice optimization approach along with validatin...

ATC Presentations

Automatic Reproduction of Supervisory Control System Logic Diagrams with High Fidelity Functional Simulation Purposes using SolidThinking Embed

This work presents the GT2 Energia methodology for the automated creation of control logics for high fidelity simulators of industrial plants. The manual development of this activity involves intrinsic difficulties due to the typical large amount ...

ATC Presentations

Using Flux2D in Development of PMSM Fault Detection Algorithms

The need for fail-safe operation of permanent magnet synchronous machines in applications requiring high reliability has prompted the development of techniques for detecting incipient stator winding faults, rotor eccentricities and demagnetization...

ATC Presentations

Integral Numerical Characterization of Thermal and Lubrication Performance of Hybrid and Electric Drive Systems

The physics of the simulated processes is inherently multiphase and involves transient phenomena of various time scales. As such, high fidelity simulation resolution places significant demands on hardware performance, external computing on-demand ...

ATC Presentations

Squeak and Rattle Prevention - Why You Should Not Wait for Your First Prototype

This presentation will discuss how the industry challenges for S&R can be answered using NVH best practices and turn cost avoidance to cost reduction. Altair and ZIEGLER will discuss how to successfully integrate CPA, FE simulation and optimizatio...

ATC Presentations, Videos

Application of FE Simulation in Manufacturing Process for Carbon Fiber Reinforced Plastic

The forming process of carbon fiber reinforced plastic has substantially increased in the industry due to its wide applicability towards mass production. The growth in production requires manufacturers to reduce the time required in forming CFRP ...

ATC Presentations, Videos

HyperWorks and OptiStruct in Composite Yacht Design

Reichel-Pugh Yacht Design is a leader in design and engineering of a wide variety of sailing yachts, from 14ft club racing dinghies to 100ft maxi superyachts that hold numerous race records in the world’s most prestigious yachting events. In addit...

ATC Presentations, Videos

Master Class: Using a Crowdfunding Tool for a Start-up

David Suriol, Co-Founder of Vortex Bladeless, presents at Converge 2016 in Essen, Germany.

ATC Presentations, Videos

Optimization of Railway Bolster Bracket for Antiroll Bar

Juan Manuel Romero Cortes, Calculation Lead Engineer at Alstom Transport Spain, presents at Converge 2016 in Essen, Germany.

ATC Presentations, Videos

We Have the Tools, But Let’s Not Lose Sight of the Knowledge

Rafa Corell, CEO at Indigraf, presents at Converge 2016 in Essen, Germany.

ATC Presentations, Videos

Designing APWorks’ Light Rider – How the First 3D-Printed Motorcycle Came to Life

Daniel Schneider, Technical Sales Manager at Airbus APWorks, presents at Converge 2016 in Essen, Germany.

ATC Presentations, Videos

Biomimetically Inspired Topology Optimization

Irmgard Lochner, Professor and Consultant at University of Applied Sciences of Biberach, presents at Converge 2016 in Essen, Germany.

ATC Presentations, Videos

Space 4.0 or the Next Paradigm for the Space Industry

Franck Mouriax, General Manager of Structures at RUAG Space, presents at Converge 2016 in Essen, Germany.

ATC Presentations, Videos

Keynote: Modern Architecture – Design Process, Tools and Technology

Neb Erakovic, Director Structural Design at CH2Mmace, was a keynote presenter at Converge 2016 in Essen, Germany.

ATC Presentations, Videos

Functional Architectural Sculpture

Il Hoon Roh, Artist/Architect, presents at Converge 2016 in Essen, Germany.

ATC Presentations, Videos

UK ATC 2015: Enhancing Drop Testing Simulation for Luxury Smartphones

Presentation by Alexandre Michat & Paul Sharp

ATC Presentations

UK ATC 2015: Dynamic Explicit Analysis & Assessment of a Ships Steering Gear

Presentation by David Hunt, Assystem

ATC Presentations

UK ATC 2015: CFD - A Practical Tool for Large Passenger Carrying Vehicles

Presentation by Laurence Wood, Plaxton

ATC Presentations

UK ATC 2015: A Systematic Approach to Weight Saving of Trailer Towing Systems at Jaguar Land Rover

Presentation by Andrew Blows, Jaguar Land Rover

ATC Presentations

UK ATC 2015: Automated Post Processing of Multimodel Optimisation Data

Presentation by Markus Schemat, BMW Group

ATC Presentations

UK ATC 2015: How Analysis & Optimisation Help Meet the Time Consstraints in F1

Presentation by Simon Gardner, Sahara Force India

ATC Presentations

UK ATC 2015: Optimised Rear Twist Beam Design

Presentation by Andrew Charlesworth, Gestamp

ATC Presentations

UK ATC 2015: Optimisation Driven Design and Additive Manufacturing Applied for ESA Sentinel-1 Antenna

Presentation by Alejandro Cervantes Herrera, Altair

ATC Presentations

Fatigue Life from Sine-on-Random Excitation

Fatigue life prediction of structures whose natural frequencies lie near the frequencies of the input loading requires the stress results from dynamic analyses. These analyses can be performed in either the time or the frequency domains depending ...

ATC Presentations

Gasoline engine development using LOGEengine

LOGEengine is an integrated simulation method for the prediction and optimization of engine in-cylinder performance parameters and studies of fuel effects on exhaust emissions. It contains a stochastic reactor model for 0D modelling (0d-SRM) with ...

ATC Presentations

Time v Frequency Domain Analysis For Large Automotive Systems

It has been recognised since the 1960’s that the frequency domain method for structural analysis offers superior qualitative information about structural response; But computational and technological issues have held back the implementation for fa...

ATC Presentations

Automated Reporting Director

F.tech R&D North America Inc. started in 2003 at the Troy Ohio location. Today F.tech R&D North America features offices in Troy Michigan and Düsseldorf Germany. F.tech has full R&D capabilities from design and CAE, to prototyping and test. Produc...

ATC Presentations

The Use of Suimulation (FEKO) to Investigate Antenna Performance on Mobile Platforms

Wireless technologies have proliferated onto automotive platforms as part of infotainment, telematics and active safety initiatives. These wireless solutions present engineers design challenges in the area of applied electromagnetics in terms of ...

ATC Presentations

Performance Evaluation, Scalability Analysis, and Optimization Tuning of Altair HyperWorks on a Modern HPC Compute Cluster

Engineers from wide ranges of industries face ever increasing needs for complex, realistic models to analyze the most challenging industrial problems; AcuSolve is designed to tackle these finite element-based Computational Fluid Dynamics (CFD) sim...

ATC Presentations

Ensuring Extrusion Product Quality at Die Design Stage

Extrusion of metals is a commercially important mass production process and extruded part are used in a wide variety of applications in in aerospace, automotive, railway, medical, electronics, consumer products and nuclear industries. The key to s...

ATC Presentations

Design Optimization of Axles using Inspire and OptiStruct

Use Inspire to form optimization from the packaging space, performance loading and manufacturing constraints to design an axle close to production ready design. The model setup requires careful setting of axle internal component design and oil fl...

ATC Presentations

Meshing the Human Lumbar Spine

HyperWorks customer Jeff Harris from NuVasive has used HyperMesh to solid hybrid mesh consecutive human vertebrae and discs from a patient bone scan. The meshing, set up in Hypermesh, is simulated using Ansys for motion limits, stiffness, and disc...

ATC Presentations

Forming Simulation of Woven Composite Fibers and Its Influence on Crash Performance

The automotive industry, in its constant quest for weight reduction, is increasingly considering composite materials as a substitute for sheet metal components to meet future fuel consumption standards. However, composite forming processes are exp...

ATC Presentations

Hot Stamping Process Simulation Using Integrated using Structural & CFD Analysis

Hot stamped steel parts are being increasingly used in automotive structures for their higher strength to meet safety standards while reducing vehicle weight to improve fuel consumption. However, manufacturing of sheet metal parts by hot stamping ...

ATC Presentations

Optimization based Chassis Design

Gestamp Chassis design and manufacture 25% of European passenger car chassis components and have been using optimisation to drive their design process for over 10 years. This presentation will highlight some of the innovative and market leading o...

ATC Presentations

High Performance Catamaran Design & Optimisation with HyperWorks

Team Rafale is regrouping aerospace engineers, as well as faculty members and students from ETS (Ecole de Technologie Superieure, in Montreal, Canada), who have taken on the ambitious challenge to design, build and race a C-Class catamaran in The ...

ATC Presentations

Motivations, Opportunities and Challenges of Additive Manufacturing for Space Application

Additive manufacturing (AM) technologies have progressed rapidly in the last years. Supported by the recent developments of design optimisation tools and manufacturing capabilities, components and parts produced using AM are emerging more and more into the focus of space industry.
The aim of this p

ATC Presentations

Material Cards for Structural Analysis

Corporations are making significant investments in innovative composite materials manufacturing technology for new product development processes and virtual prototyping for design and structural analysis. An effective virtual material (or material...

ATC Presentations
320 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!