Resource Library

Crash Simulation at Group PSA : Main Stakes and Perspectives

Presentation by Laurent Di Valentin, CAE Master Expert at PSA Group.

The constant improvements of the CAE process (from subsystem levels to the full car itself) and the development of optimization tools to reduce the mass and increase the performances led us to use the simulation as one v

ATC Presentations, Videos

Efficient Multidisciplinary Modeling of a Washing Machine Motor Duty Cycle

Presentation by Dr. Martin Ortega, Principal Design Engineer at Mabe.

This work presents a systematic process of the electromagnetic and thermal analysis of a washing machine single-phase capacitor-run induction motor during a full wash cycle. By utilizing an electromagnetic solver and a

ATC Presentations, Videos

Developing the Electric Drivetrain of Tomorrow - How Numerical Tools can Support Cooling and Lubrication System Development

Presentation by Johannes Winklinger, Energy & Fluid Expert at Magna Powertrain.

We are right at the beginning of the new mobility era with deep impact on the architecture of cars. Hybridization and electrification are the dominating topics in the automobile industry and consequently the power

ATC Presentations, Videos

Simulation of a Gas Turbine and Generator System Under Steady State and Transient Conditions using Altair Activate

Presentation by Tomas Suguinoshita Quirino, GT2 Tecnologia.

This work presents the strategy created by GT2 Tecnologia to simulate the dynamics of a system comprised by a gas turbine coupled with an electrical generator, which is a typical schema for thermoelectrical powerplants. The mathe

ATC Presentations, Videos

Saving Lives with Simulations: CEDREM Collaborates with DuPont on Ballistic Protection Solutions

Presentation by Edouard Ferry, CEDREM.

This study is a first step to study human body behavior during ballistic impacts and find injury thresholds. It combines many HyperWorks specificities such as composite modelling, hyper elastic material law, high speed impacts, equations of state, bi

ATC Presentations, Videos

Concept Design with Altair Inspire

Concept Design with Altair Inspire seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Applied Fluid Dynamics, Thermal Management and e-Drive Oiling

Learn how industry leaders are using Altair's CFD solutions to drive innovation in their products and to cope with complex projects.

In the first part thermal management of electric drivetrains is addressed with a multiphysics approach to combine high-fidelity fluid flow and thermal analys

ATC Presentations, Videos

Impact Simulation, Safety Analysis and Occupant Protection Strategies in CAE

Crash & Safety Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Transient Analysis of Switched-Reluctance Motor Drive by FE Model Co-Simulation

Presentation by Lino Di Leonardo, University of L'Aquila.

This presentation showcases an analysis technique of electric motor drive based on transient simulation tools and embedded finite element motor modeling (co-simulation). A couple of software tools, Altair Flux and Activate, are emplo

ATC Presentations, Videos

Aspects of Heterogeneous System Models in Industrial Applications

Presentation by Robert Höpler, Founder of SysOpt GmbH.

Heterogeneity can be present on various stages in system modelling and simulation. A system model is often called ‘multi-domain’, when different technical domains are present, such as hydraulics, mechanics, and control. When it comes

ATC Presentations, Videos

Model Validation of a Seat Using Building Block Approach

Presentation by Sébastien Dépierre, Simulation Manager at Zodiac Seats France.

ATC Presentations, Videos

Truck Ride Comfort Analysis by Using Compose and MotionSolve

Ride comfort analysis modeling and ride comfort evaluation done in Altair Compose and Altair MotionSolve.

ATC Presentations

Composites Driving Innovation: Development of a Sit-Ski as an Advanced Technology Demonstrator

The National Composites Centre (NCC), in collaboration with the Manufacturing Technology Centre (MTC), Advanced Manufacturing Research Centre (AMRC) and University of Warwick (WMG) worked on a collaborative project to develop a Cross-Catapult tech...

Customer Story

Fast and Accurate Design of Electromagnetic Devices with Flux and FluxMotor

Altair Flux is a leading finite element simulation software for electromagnetic modeling. Used for more than 35 years in industry worldwide, and based on the most advanced numerical techniques, Flux has become a reference for the high accuracy it delivers.

Altair also recently introduced Altair F

Webinar Recordings

Researchers Tune into Simulation to Develop World’s Smallest TV Antenna

Television is considered one of the most important media of communication in Mexico. However, transmitting broadcast signals to some of the country’s remote areas can be challenging. That is why the Center for Research a nd Applied Sciences (CIICA...

Articles

Machine Learning in Engineering

Use of machine learning for engineering applications brings field data and engineering knowledge together, resulting in more accurate decision making.

Articles

Taking Control of the Wind and Waves with DSA

A brief introduction to DSA, their two products available through the APA, and how they are applied to the oceanographic engineering process.

Videos

Optimization of Spacecraft Metallic Primary Structure with OptiStruct

Spacecraft primary structure is designed to react all the major loads imparted on a spacecraft. Inadequately designed or tested primary structure can result in structure failure during launch and endanger mission success. To maximize the useful pa...

ATC Presentations

Single Model Multi-Attribute Analysis & Optimization

On September 27th, OptiStruct users presented the latest capabilities and advancements in simulation-driven design methods for noise and vibration, durability and fatigue solutions. In addition, Altair experts showcased the unique OptiStruct devel...

Battlecard

Durability Workshop

On September 27th, OptiStruct users presented the latest capabilities and advancements in simulation-driven design methods for noise and vibration, durability and fatigue solutions. In addition, Altair experts showcased the unique OptiStruct devel...

ATC Presentations

Hussmann India Achieves Greater Simulation Accuracy with Altair AcuSolve™

Hussmann provides tailored food safety solutions designed to improve food quality and integrity. As the manufacturer of refrigerated display cases and systems, they have to maintain the highest performance and quality standards of the products the...

Customer Story

Altair Multiscale Designer Webinar: Taking Material Modeling to the Next Level

Multiscale modeling of composite materials has become a viable solution to reduce the amount of physical testing needed for accurately material characterization and to better assess the nonlinear material behavior and failure mechanisms in structural analysis.

Whether you are working with high-pe

Webinar Recordings

Webinar: First-Time-Right Design of Matching Circuits for Complex Antenna and RF Applications

In the webinar, the sources of the discrepancy between measurements and simulation will be identified. We will demonstrate a first-time-right design flow of matching circuit using the FEKO electromagnetic solver and the Optenni Lab RF Design Autom...

Videos, Webinar Recordings

ElectroFlo Brochure

Altair ElectroFlo™ is a fully featured and efficient thermal analysis software that combines the power of coupled thermal/electrical analysis with the ease-of-use of an object oriented GUI to provide solutions to challenging problems facing today'...

Brochures

Webinar: How to Instantly Assess Oceanographic Mooring Designs

This webinar presents a different way of solving a static mooring line profile and the effects on calculation speed, mooring profile design, and limitations for dynamic analysis. This webinar will include a brief overview of our dynamic analysis s...

Videos, Webinar Recordings

NEVS Uses Simulation Driven Innovation in Car Body Design

Dr. Lars Fredriksson, Business VP – Simulation Driven Innovation at Altair presenting on behalf of NEVS at the 2017 European ATC.

The automotive industry is experiencing ever increasing requirements on new vehicles from all directions. Still, development cycles must be shortened and development c

ATC Presentations, Video Testimonials

To the Moon with Additive Manufacturing - Optimization, Space and Everything in Between

Yoram Malka, Head of Mechanical Engineering Department at Israel Aerospace Industry presents at the 2017 European ATC.

Increasing the performance of a system is a constant challenge engineers in all application areas face. This challenge specifically important in the aerospace world where weight

ATC Presentations, Videos

Industry 4.0 – How Digitalization Makes Weight & Balance Process More Agile and Connected

Kai Thräne, Manager Weight & Balance Research & Development at Airbus Helicopter presents at the 2017 European ATC.

In the context of Industry 4.0, most enterprise processes must become more digitized. A key element will be the evolution of the traditional product development toward a connected a

ATC Presentations, Videos

The Secret Lives of Models

Gael Salles, Director of Computer Aided Product Engineering Technology at Schneider Electric presents at the 2017 European ATC.

After a brief introduction of the changes in the Energy Landscape, an analysis of the life of models will be presented from the viewpoint of system engineering. Along wi

ATC Presentations, Videos

Airbus: When Simulation Turns into Reality

Dominique Moreau, Head of Airframe Technical Authority, Airbus presents at the 2017 European ATC.

This presentation will present the today’s state-of-the-art numerical simulation and the very latest progress Airbus did on the topic. The presentation will go through what remains to develop in the

ATC Presentations, Videos

Artemis Racing’s use of Simulation Driven Design Technology in Pursuit of the 2017 America’s Cup

Peter Bentley, Design Team Member at Artemis Racing presents at the 2017 European ATC.

The increase in velocity enabled by advanced structural composites and on-board control systems has been a true game changer, and the future of sailing will be increasing dependent on simulation driven design.

ATC Presentations, Videos

Vehicle Concept and Structure of the New Opel Ampera-e

Dr. Hennig Holzmann and Dr. Boris Künkler of Adam Opel present at the 2017 European ATC.

The new Opel Ampera-e offers the customer a great car with the optimum balance regarding performance, package, mass and cost.

ATC Presentations, Videos

Webinar: Efficient Solid Meshing and Fatigue Assessment of Welds Using SimLab and FEMFAT

Typically, in the automotive industry, the numerical fatigue life analysis of seam welds is based on shell models. Determining the local stiffness and the fatigue life of weld details with those models is a challenging task; especially for closely...

Videos, Webinar Recordings

Altair ESAComp: A Powerful Toolbox for Classical Composite Analysis

Find out how Altair ESAComp enhances the capabilities of the Altair HyperWorks platform by providing classical analyses of structures made of layered composites. Altair ESAComp is used from preliminary and detailed design phases to advanced analys...

Webinar Recordings

Developing Miniature Circuit Breakers with a Multi-Disciplinary System Design Approach

An Altair customer for many years, Schneider Electric at first used only Altair Flux; now the company has extended their usage to several more software products in the Altair HyperWorks suite, including solutions such as Activate, MotionSolve, Opt...

Customer Story

First-Time-Right Laser Beam Melting with Additive Works’ Amphyon

This webinar will present the current state of the Amphyon software including the new Support Module and how the pre-processing for Laser Beam Melting processes will be tomorrow. The web presentation includes a speech about the needs for software,...

Webinar Recordings

Altair FEKO for Marine EMC Applications

Altair FEKO is a leading comprehensive electromagnetic analysis software package, which is widely used in many industries and built on state of the art computational electromagnetic techniques to provide users with solutions to a wide range of ele...

Videos

Altair Inspire Brochure

Altair Inspire enhances the concept development process by enabling simulation-driven design to increase your product's efficiency, strength and manufacturability.

Brochures

White Paper: Using Virtual Operator-in-the-Loop Analysis to Avoid Market Rejection at the Earliest Stages of Cab Design

Through an extensive digital human modeling environment that has been used to accurately predict many aspects of human performance, Santos technologies can be used to improve and optimize cab designs.

Technical Papers

Showcase Video: TAITherm

Introductory video to TAITherm from ThermoAnalytics.

Video Testimonials, Videos
1446 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!