Electronic System Design for Aerospace and Defense Webinar Series
Aerospace and defense industries rely heavily on advanced electronic systems for field communications, controls and targeting systems, threat detection, asset tracking and health monitoring, and theater operations. These advanced electronic systems often require multiple high-fidelity antennas and their interference-free integration within a device, system or vehicle for maximum signal strength and reliability. This webinar series will explore electromagnetics simulation strategies and technologies to support the development of complex electronic systems.
This webinar series has been designed to address the needs and challenges of engineering managers, EMC engineers, antenna engineers and designers, RF engineers, and Radio site engineers from military contractors (OEMs and their suppliers), defense governmental organizations (including navy, air force, army), and aerospace companies (OEMs and their suppliers).
Webinars
4 videos
Altair Inspire Optimization Workflow
This series of videos shows users how to use Altair Inspire from start to finish. Examples include defining the design space, analyzing dynamic motion, conducting topology optimization studies, designing for additive manufacturing, verifying designs, and configuring assemblies.
How-to
6 videos
Using Altair EDEM for Off-road Vehicle Design
Watch examples of applications of EDEM coupled with MotionSolve and Activate in the design of tracked and wheeled vehicles.
EDEM software, powered by the Discrete Element Method (DEM), accurately represents the behavior or rocks, soils and ores and can realistically model a variety of terrains from soft-soil, dry sand, to rugged gravel surfaces. Integrating EDEM with Multi-body Dynamics tools provides great realism in vehicle mobility simulations and enable engineers to predict the behavior and performance of off-road vehicles in a variety of off-road environments and to study complex manoeuvres which otherwise might be restricted.
Use Cases
3 videos
Using Altair EDEM in the design of Construction & Mining Equipment
Watch examples of applications of EDEM in the design of dump trucks, excavators, loaders, grab buckets, and more.
EDEM software, powered by the Discrete Element Method (DEM), accurately simulates the behavior of rocks, soils, ores and gravel, etc. It provides engineers with crucial insight into how materials will interact with their equipment during a range of operating conditions, and enable them to use realistic loads in Finite Element Analysis and Multi-body Dynamics simulations for optimal designs.
Use Cases
5 videos
Using Altair EDEM in Mining & Metals
Watch examples of applications of EDEM in the mining, mineral processing and steelmaking industries.
EDEM software, powered by the Discrete Element Method (DEM), enables engineers to predict the flow behavior of rocks, ores and coal, ores through each segment of their equipment and operation. It is used to evaluate and verify the design of transfer chutes and to optimize comminution equipment such as crushers, ball mills, as well as vibrating screens.
Use Cases
5 videos
Using Altair EDEM for Agricultural Machinery Design
Watch examples of applications of EDEM in the design of agricultural machinery such as combine harvesters, tillage tools, and grain handling systems.
EDEM software, powered by the Discrete Element Method (DEM), simulates and analyze the behavior of grains, seeds, crops and soils. It enables engineers to predict the behavior of materials and their impact on their machines as well as getting key insights into machine-soil and machine-crops interactions.
Use Cases
4 videos
Using Altair EDEM for Process Manufacturing
Watch examples of applications of Altair EDEM in the pharmaceutical, food, chemicals and additive manufacturing industries.
EDEM software, powered by the Discrete Element Method (DEM), enables companies to accurately simulate and analyze the behavior of bulk solids, providing key information on processes otherwise difficult or sometimes impossible to measure.
EDEM enables a detailed analysis and visualization of the flow of particles, from powders to tablets, through process segments and handling equipment, and can promote both innovation in product design as well as reducing the need for physical prototypes and long product development cycles.
Use Cases
13 videos
Using Altair Software for Systems Modeling
Altair model-based development tools drive fast development for smarter connected systems. Altair customers simulate complex products as systems-of-systems throughout their entire development cycle. Explore more by combining mechanical models with electrical models to enable multi-disciplinary simulation and leverage automatic code-generation for your next generation embedded systems.
Learn more at altair.com/systems-modeling.
Use Cases
2 videos
Using Altair Software for Simulation-driven Design
The widespread adoption of Altair SimSolid™ has enabled customers to accurately test more ideas during each design iteration. Altair Inspire™ was the first tool to democratize topology optimization. Altair Inspire now embeds the speed and accuracy of SimSolid supporting faster, easier design exploration and product creation for allowing design engineers, product designers, and architects to create and investigate structurally efficient concepts for complex assemblies.
Use Cases
3 videos
Using Altair Software for Structures
Altair offers industry-leading engineering analysis and optimization tools from simulation-driven design concepts to detailed virtual product validation, and simplified modeling workflows to advanced high-fidelity model building. Whether big or small, our customers trust their decision making to Altair, the pioneer of simulation-driven design.
Learn more at altair.com/structures.
Use Cases
5 videos
Using Altair Software for Electromagnetics
Altair software is used across industries to solve a broad range of electromagnetic problems from static to low and high frequencies. Whether your application requires multiple frequency and time-domain techniques with true hybridization to enable the efficient exploration of a broad spectrum of electromagnetic performance, other the simulation of magneto static, steady-state and transient conditions, we have the tools you need.
Learn more at altair.com/electromagnetics.
Use Cases
5 videos
Using Altair Software for Multiphysics
Altair provides an industry-leading portfolio of multiphysics-enabled software to simulate a wide range of interacting physical models including fluid-structure interaction, flexible bodies, aeroacoustics, and thermomechanical simulation. Together with Altair’s multidisciplinary optimization and scalable high-performance computing you can solve real world engineering problems quickly and effectively.
Learn more at altair.com/multiphysics.
Use Cases
4 videos
Using Altair Software for Manufacturing
Altair offers a unique set of simulation tools to evaluate product feasibility, optimize the manufacturing process, and run virtual try-outs for many traditional, subtractive, and additive manufacturing processes. Users can validate designs early in the manufacturing process with the simplicity and affordability of the simulation software, as well as use optimization technology with specific manufacturing constraints to design better, more efficient products.
Learn more at altair.com/manufacturing-applications.
Use Cases
7 videos
From Composites Design to Production with Altair HyperWorks
Walk Through the Journey of Advanced Composites with Altair
Watch the on-demand recordings and find out how Altair's composites solutions can help you design and analyze structures ready for production.
Webinars
6 videos
Inspire Studio How-To Series: Designing a Measuring Cup
In this Inspire Studio How-to Series we'll be designing a measuring cup. Each video shows a different step in the design process.
Tutorials, Use Cases
5 videos
Altair Model-Based Development Customer Stories from 2019 Global ATC
These success stories illustrate how customers are leveraging Altair's Math & Systems technology for Model-Based Development to develop better products, faster. Simulations involve 3D, 1D, and/or 0D modeling approaches based on the integrated use of Altair MotionSolve™, Altair Activate™, and/or Altair Compose™.
ATC Presentations, Videos
16 videos
Altair Activate Key Capabilities
Playlist highlighting the key capabilities of Altair Activate
Videos
6 videos
Altair Embed Digital Power Intro
Introduction playlist to Altair Embed digital power
Training Materials, Tutorials
4 videos
Buck Converter Series
Playlist on Buck Converters with Altair Embed
Training Materials, Tutorials
6 videos
PMSM Series
Altair Embed playlist-PMSM
Training Materials, Tutorials
9 videos
Controlling LED's Playlist
Playlist on controlling LED's with Altair Embed
Training Materials, Tutorials
3 videos
Embed Plot Blocks Series
Playlist on Plot Blocks with Embed
Training Materials, Tutorials
2 videos
Delays, Counters, & Discrete Integrators Playlist
Playlist on delays, counters, & discrete integrator with Altair Embed
Training Materials, Tutorials
2 videos
Fixed Point Series
Fixed point playlist with Altair Embed
Training Materials, Tutorials
3 videos
Signal-Based Modeling Playlist
A playlist on signal-based modeling
Training Materials, Tutorials
7 videos
Altair Embed Arduino Series
Embed playlist on Arduino
Training Materials, Tutorials
6 videos
Embed Drone Control Series
Playlist on Altair Embed-Drone control
Training Materials, Tutorials
3 videos
Altair Embed - Salient PM Motor Control Series
Playlist on Altair Embed Salient motor control
Training Materials, Tutorials
2 videos
New Features in Altair MotionSolve
Series of new feature videos for Altair MotionSolve within the Altair HyperWorks 2019 release
Videos
7 videos
New Features in Altair HyperStudy
Series of new feature videos for Altair HyperStudy within the Altair HyperWorks 2019 release
New Features
5 videos
New Features in Altair HyperLife
Series of new feature videos for Altair HyperLife within the Altair HyperWorks 2019 release
New Features
7 videos
New Features in Altair HyperMesh
Series of new feature videos for Altair HyperMesh within the Altair HyperWorks 2019 release
Videos
5 videos
Altair Compose Key Capabilities
Key capabilities for Altair Compose
Videos
12 videos
JEC World 2019 Conference - Empowering Composites Innovation with Simulation
Altair hosted a conference at the JEC World composites expo in which leading innovators across multiple industries discussed how they leverage computer-aided engineering (CAE) simulation software to design, optimize, and validate their composite structures.
Videos
4 videos
Non-linear Simulation and Optimization
Mechanical Simulation Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.
ATC Presentations, Videos
6 videos
High Frequency Electromagnetic Simulation
In the session there are great presentations from high quality speakers from industry sectors including automotive, aviation, aerospace railway industry, as well research.
A wide variety of applications are covered, from antenna design and integration, to influences of radome structures on such systems, virtual test drives, as well as EMC related aspects such as emissions from cables and systems.
Additionally insight is given into fast and easy simulations to design matching networks, e.g. for complex antenna structures, and the session is finished with an insight into Altair’s recent and future development activities on the high frequency EM solution side.
Presentations recorded during the 2018 Global ATC in Paris, France on October 18, 2018.
ATC Presentations, Videos
7 videos
New Developments in Technology and Process for Design for Additive Manufacturing
The focus of these presentations address in particular, how to create economic applications by combining new manufacturing technologies and a simulation driven design process.
Leading industry representatives present successful applications of additive manufacturing in combination with new approaches in product development. With their best practice examples, they will answer the question: "How to create and benefit from an added value with additive manufacturing?"
Presentations recorded at the Global ATC in Paris, France on October 16, 2018.
ATC Presentations, Videos
4 videos
Design for the Future of e-Mobility
The global automotive industry is on the verge of disruption with electrification being one of the major trends. In this session we will discuss the challenges and opportunities engineers are facing in the design of the future e-Mobility, including noise and vibration, motor design and control, thermal management and EMC/EMI, etc. You will learn about applying multiphysics simulation driven by system modeling and optimization technologies that allow you to accelerate next generation mobility solutions development.
Presentations recorded at the Global ATC in Paris, France on October 16, 2018.
ATC Presentations, Videos
5 videos
Simulation-driven Design and Manufacturing
Design for Manufacturing seminar held during 2018 Global ATC in Paris, France on October 16, 2018.
ATC Presentations, Videos
6 videos
Teaching & Learning Simulation Driven Innovation
The focus of this seminar is on teaching and learning Simulation Driven Innovation and Altair's Academic Program. We will hear from academic leaders all over the world on how they are equipping engineering students for their future careers. Join us for an exciting and engaging program.
Presentations recorded at the Global ATC in Paris, France on October 16, 2018.
ATC Presentations, Videos
5 videos
Extending the Life of Products with Simulation
Fatigue and Durability seminar held during 2018 Global ATC in Paris, France on October 16, 2018.
ATC Presentations, Videos
8 videos
Using Altair Compose Calculations & Scripts to Improve and Accelerate CAE Processes
Learn how to use Compose for 0D modeling & simulation, as complementary to 1D and 3D CAE simulations – to perform useful numerical computations; to do parametric modeling; to create scripts; to automate commonly repeated product development processes; to complement or replace legacy in-house codes; to visualize and manipulate CAE data; and more.
Compose uses OpenMatrix Language (OML) syntax that is directly compatible with MATLAB/Octave and interoperable with Python – so you can preserve and reuse existing scripts constructed with these other languages.
Presentations recorded at the Global ATC in Paris, France on October 16, 2018.
ATC Presentations, Videos
5 videos
Integration of Optimization into Design with Altair's MDO Offering Playlist
CAE has since long been established as the tool for validating and certifying mechanical properties during product development. Simulation-driven design takes simulation and optimization into the creative design process. Primary goal of simulation-driven design is to provide a continuous stream of decision data to support concept design and later product development stages.
Presentations recorded at the Global ATC in Paris, France on October 16, 2018.
ATC Presentations, Videos
3 videos
Digital Twin, Predictive Maintenance and In-service Simulation
The Digital Twin and IoT seminar features the key ideas behind the concept of the Digital Twin, predictive maintenance, and its practical relevance especially for product engineering and simulation.
Presentations recorded at the Global ATC in Paris, France on October 16, 2018.
ATC Presentations, Videos
8 videos
Lead Time Reduction in Modeling and Visualization Playlist
Seminar held during 2018 Global ATC in Paris, France on October 16, 2018.
ATC Presentations, Videos
8 videos
E-Mobility System Integration and Optimization Video Series
This series discusses various aspects of system modeling for e-Mobility studies from overall performance simulations including fuel economy, to model refinements for electric engines and/or vehicle dynamics.
Training Materials, Tutorials
4 videos
Impact Simulation, Safety Analysis and Occupant Protection Strategies in CAE
Crash & Safety Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.
ATC Presentations, Videos
6 videos
Electromagnetic Design and Multiphysics Simulation for the Creation of Innovative Products
This technical session focuses on design in electrical engineering, and especially on low frequency electromagnetic simulation. Presentations can be viewed of the latest advances in the Altair simulation solutions - Flux and FluxMotor. Several companies also illustrate how they use these tools to create innovative products. In particular, it is shown how multiphysics approaches consider the various constraints of electric machine design. It is also demonstrated how optimization techniques can be used at various stages of the process, and how powerful they are to meet the many challenges of electro-mechanical design.
Presentations recorded at the 2018 Global ATC in Paris, France on October 18, 2018.
ATC Presentations, Videos
4 videos
Applied Fluid Dynamics, Thermal Management and e-Drive Oiling
Learn how industry leaders are using Altair's CFD solutions to drive innovation in their products and to cope with complex projects.
In the first part thermal management of electric drivetrains is addressed with a multiphysics approach to combine high-fidelity fluid flow and thermal analysis in electric motors to develop effective cooling mechanisms.
Also included are diverse talks reaching from automotive fuel tank sloshing over to marine construction show the breadth of fluid applications addressable with Altair HyperWorks.
Presentations recorded at the Global ATC in Paris, France on October 18, 2018.
ATC Presentations, Videos
3 videos
Efficient and Accurate Material Engineering
The focus of the seminar is in introducing Altair Multiscale Designer, a framework for efficient and accurate multiscale modeling and simulation of composite and other heterogeneous materials. The development and validation of multiscale material models against experimental test data is presented. The session also features a case study on the development of an ultralight plastic replacement for a metallic automotive part with the help of topology optimization.
Presentations recorded at the Global ATC in Paris, France on October 18, 2018.
ATC Presentations, Videos
2 videos
Concept Design with Altair Inspire
Concept Design with Altair Inspire seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.
ATC Presentations, Videos
4 videos
Concept Modelling and Upfront Simulation
Design Review & Styling Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.
ATC Presentations, Videos
4 videos
SimLab Tutorials – Meshing
Series of videos aimed to get you started using SimLab for meshing.
Getting Started, Training Materials
11 videos
Enhance Device Design and Reduce Clinical Trials Through Simulation
This biomedical webinar series highlights solutions for some of the healthcare industry's most complex challenges. Each session covers applications specific to the medical field including how to leverage multiphysics to enhance medical device design, using machine learning to optimize medical stents, improving mechatronics performance with model-based development software, leveraging additive manufacturing for the design of implants, and using optical modeling for biomedical systems and applications.
Webinars
5 videos
e-Mobility Development Webinar Series
The electric mobility revolution is ready to go mainstream.
OEMs, suppliers, and emerging vehicle manufacturers are investing billions to develop innovative electric vehicles and optimize development and production processes to deliver e-mobility to the masses. In these presentations, learn how Altair works with the world’s leading manufacturers and suppliers to accelerate product development, enhance energy efficiency, and optimize integrated system performance.
Webinars
16 videos
