Design of a Fuel Cell Race Car for the Annual Shell Eco-Marathon with Altair Products

The student team of the university of applied sciences in Munich participates in the annual Shell Eco-Marathon. The team has to develop a very light and highly efficient race car within less than a year. As there is no time for prototyping, simulation is mandatory. Altair provided the race team with the necessary software. The team secured 3rd place in the 2015 edition of the race!

All Videos

The Multiphysics Optimization Platform for e-Motor Innovation

The Multiphysics Optimization Platform for e-Motor Innovation

Altair develops multiphysics simulation technologies that allow you to accelerate next generation mobility solutions development. From smart control design to powertrain electrification and vehicle architecture studies, our solutions enable optimization throughout the development cycle, all backed u

Videos
Spot Weld Fatigue

Spot Weld Fatigue

This video shows the typical workflow to perform a spot weld fatigue analysis with HyperLife.

Videos
Stress Life Analysis

Stress Life Analysis

This video shows the typical workflow to perform a stress life analysis in HyperLife.

Videos
Seam Weld Fatigue

Seam Weld Fatigue

This video shows the typical workflow to perform a seam weld fatigue analysis with HyperLife.

Videos
SimLab Automated Results

SimLab Automated Results

Improve CAE accuracy with automated results convergence

Videos
Integration CAD/FEA for Optimization/DOE

Integration CAD/FEA for Optimization/DOE

Seamlessly setup and run optimization and design of experiment (DOE) studies in SimLab

Videos
Automated Weld Mesh

Automated Weld Mesh

Automatically create weldings mesh in SimLab

Videos
Automated Bearings Mesh Creation

Automated Bearings Mesh Creation

Automatically create bearings mesh in SimLab

Videos
Mesh Editing with Face Replace

Mesh Editing with Face Replace

Update model mesh with automated geometry recognition in SimLab

Videos
Automated LBCs Assignment

Automated LBCs Assignment

Automatically assign load boundary conditions (LBCs) in SimLab

Videos
Generation of Antenna Array Excitation

Generation of Antenna Array Excitation

See how Altair Compose can be used for the automatic generation of antenna array excitations. You can seamlessly perform the necessary calculations, data formatting and output for use with Altair Feko.

Videos
JEC World 2019 Conference - Empowering Composites Innovation with Simulation

JEC World 2019 Conference - Empowering Composites Innovation with Simulation

Altair hosted a conference at the JEC World composites expo in which leading innovators across multiple industries discussed how they leverage computer-aided engineering (CAE) simulation software to design, optimize, and validate their composite structures.

Videos
Empowering Composites Innovation with Simulation

Empowering Composites Innovation with Simulation

Markku Palentera, Director of Global Composites Business Development at Altair, delivers a presentation outlining Altair's composite design and analysis portfolio and details how manufacturers leverage these tools to empowering composites innovation through simulation.

Videos

Virtual Material Characterization Using Multiscale Technology

Virtual Material Characterization Using Multiscale Technology

Jens Bold, Structural Analysis Engineer from Boeing Research & Technology, delivers a presentation on virtual material characterization using Altair Multiscale Designer

Dow

Videos
Fiber Patch Placement Technology

Fiber Patch Placement Technology

Neven Majic, Executive Vice President of Cevotec GmbH discusses the use of fiber patch placement technology to produce additive manufactured composite parts.

Download the Presentati

Videos
Solar Car Challenge: Pushing the Boundaries using Composites Optimization

Solar Car Challenge: Pushing the Boundaries using Composites Optimization

Raphael Gerard, Design Engineer at Gurit, discusses the use of composite optimization with Altair OptiStruct to reduce weight and increase performance in a solar car challenge.

Download the Presenta

Videos
ESRD StressCheck Aero Wing Flap Video

ESRD StressCheck Aero Wing Flap Video

ESRD StressCheck Aero Wing Flap Fitting Use Case

Videos
AVL Fire - CFD for IC Engine Development

AVL Fire - CFD for IC Engine Development

Introducing Fire M - The easy way to efficient CFD

Videos
SC18: Talking Altair and PBS Works with insideHPC

SC18: Talking Altair and PBS Works with insideHPC

Rich Brueckner from insideHPC interviews Altair CTO Sam Mahalingam and Chief Scientist Andrea Casotto at SC18 in Dallas. The trio discusses high-performance computing, product design and innovation, and the Altair PBS Works™ HPC software suite.

Videos
Calculation Management with Maple

Calculation Management with Maple

Maple is a software tool that can handle all your mathematical needs, from performing simple calculations to advanced computations, visualizations, data analysis, and algorithm development. In this video, you’ll see how Maple also helps you maximize the value of your calculation efforts, reducing ri

Videos
Oracle Cloud: Altair ultraFluidX™ and Altair nanoFluidX™

Oracle Cloud: Altair ultraFluidX™ and Altair nanoFluidX™

Altair was founded in 1985 with a vision to use simulation to drive design and decision-making. Through the years simulation has evolved from the back end of the design process to the front — and today's cloud infrastructure opens up new possibilities to solve problems of unlimited size.

Videos
Altair FEKO for Marine EMC Applications

Altair FEKO for Marine EMC Applications

Altair FEKO is a leading comprehensive electromagnetic analysis software package, which is widely used in many industries and built on state of the art computational electromagnetic techniques to provide users with solutions to a wide range of electromagnetic problems. FEKO has been applied extensiv

Videos
What are the Concept Challenges?

What are the Concept Challenges?

See how the C123 process helps you to find concept challenges.

Videos
Altair

Altair

Altair Inspire Form feasibility workflow videos.

Videos
RAMDO Showcase Video

RAMDO Showcase Video

Introductory Video to RAMDO from RAMDO Solutions. RAMDO is an uncertainty quantification, reliability analysis, and design optimization software platform.

Videos
Showcase Video: TracePro

Showcase Video: TracePro

TracePro combines Monte Carlo ray tracing, analysis, CAD import/export, and optimization methods with a complete and robust macro language to solve a wide variety of new problems in illumination design.

Videos
Multiscale Designer Product Video

Multiscale Designer Product Video

Multiscale Designer can help achieving more accurate and cost saving results by looking into the individual constituent of composite materials. The tool is well suited for woven, short and long chopped fiber composites and integrates with Altair's solvers OptiStruct and RADIOSS, as well as other com

Videos
Rapidly Exploring Electric Vehicle Architectures with C123

Rapidly Exploring Electric Vehicle Architectures with C123

To overcome the challenges of developing a vehicle architecture shared across a range of electrical vehicles, National Electric Vehicle Sweden (NEVS) leveraged Altair’s unique three stage concept development process, C123 using a combination of optimization technologies, design processes and enginee

Videos
The Design Revolution Offered by Combining Additive Manufacturing with Simulation Driven Design

The Design Revolution Offered by Combining Additive Manufacturing with Simulation Driven Design

Topology optimization is a computer based calculation procedure which can design mechanically stressed component structures in such a way that the highest possible rigidity can be achieved with minimal material usage. Only those parts of a component which are essential for the required flux of force

Videos
Sella Chair - Form Follows Performance

Sella Chair - Form Follows Performance

Short video describing the design and production of a design chair by Architect Atanas Zhelev (Digital Architects, Vienna, Austria). This design piece demonstrates the feasibility of his Active Grid Monocoque System (AGM) he uses in his work for highly curved, wide spun architecture. The analysis ha

Videos
Use of Composites Materials in Architecture

Use of Composites Materials in Architecture

Atanas Zhelev and Mariya Korolova (Digital Architects - Vienna, Austria) and Daisuke Hirose (Archicomplex - Tokyo, Japan) made a design proposal for the Architecture competition for a bid at the Varna Library in Bulgaria. Their proposal features a composite of birch wood and carbon fiber laminate wh

Videos
Development of a New Lightweight Aluminum Profile for a Glass Balustrade

Development of a New Lightweight Aluminum Profile for a Glass Balustrade

The design of architectural components such as a balustrade can be challenging, since the design does not only have to look good, it also has to meet several safety requirements and standards. In addition, all designs have to be developed within the shortest time possible. To meet these challenges t

Videos
Showcase Video: CES Selector

Showcase Video: CES Selector

Introductory Video to CES Selector from Granta Design.

Videos
FieldView Express How-To Video: Create Your First Image (Part 2)

FieldView Express How-To Video: Create Your First Image (Part 2)

Step-by-step instructions on how to create an image in FieldView Express. (Part 2)

Videos
FieldView Express How-To Video: Create Your First Image (Part 1)

FieldView Express How-To Video: Create Your First Image (Part 1)

Step-by-step instructions on how to create an image in FieldView Express. (Part 1)

Videos
Virfac® Welding Scheduler Video

Virfac® Welding Scheduler Video

A brief walk through of Virfac® Welding Scheduler (no audio).

Videos
Holistic System Performance Improvement

Holistic System Performance Improvement

Raising efficiency by changing design paradigms for electric machines. This presentation was made at the CWIEME 2017 exhibition in Berlin, Germany, during June 2017

Videos
Efficient Injection Molding Tools through Optimization, CFD Simulation and 3D Printing

Efficient Injection Molding Tools through Optimization, CFD Simulation and 3D Printing

The company PROTIQ (www.protiq.com) worked with Altair and created a highly efficient molding tool. Optimization with OptiStruct was used to find the optimal design to guarantee the maximum tolerances of the generated products. The cooling process of the product was simulated with CFD (AcuSolve). As

Videos
RohrLEx

RohrLEx's DSHplus Knowledge Base

The RohrLEX Knowlege Base consists of 15 short videos with tips and tricks, consultation and advice on questions related to pressure oscillation problems. All videos are subtitled and do not contain audio.

Videos
Showcase Video: Sense

Showcase Video: Sense

Introductory video to Sense from Fieldscale.

Videos
Have a Question? If you need assistance beyond what is provided above, please contact us.

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!