Adam Wais of Rolo Bikes Discusses the Working Relationship with Altair

 

During the development of a new carbon fiber bicycle, the design team at Sweden based Rolo Bikes, wanted to develop a frame which exhibited world leading strength and stiffness attributes while keeping weight to an absolute minimum. The team required an efficient process to design the frame and test it in a virtual world against the industry’s safety and performance standards.

All related resources

The Multiphysics Optimization Platform for e-Motor Innovation

The Multiphysics Optimization Platform for e-Motor Innovation

Altair develops multiphysics simulation technologies that allow you to accelerate next generation mobility solutions development. From smart control design to powertrain electrification and vehicle architecture studies, our solutions enable optimization throughout the development cycle, all backed u

Videos
Top Use Cases: EFEA

Top Use Cases: EFEA

Presentation introducing a few of the top use cases for the acoustic simulation software by MES.

Customer Stories
Chiastek Showcase Video

Chiastek Showcase Video

4-minute video introduction showcasing CosiMate as a platform for modeling and visualization, analysis and optimization in the automotive and aerospace industry.

Video Testimonials
BMW Motorrad

BMW Motorrad

By automating the crankshaft modeling process using Altair SimLab, BMW Motorrad, the motorcycle division of BMW was able to significantly reduce their model creation time, and enable accuracy in budgetary forecasting and planning. As a result of making it an inhouse resource, they were able to gain

Customer Stories
Stress Life Analysis

Stress Life Analysis

This video shows the typical workflow to perform a stress life analysis in HyperLife.

Videos
Seam Weld Fatigue

Seam Weld Fatigue

This video shows the typical workflow to perform a seam weld fatigue analysis with HyperLife.

Videos
Integration CAD/FEA for Optimization/DOE

Integration CAD/FEA for Optimization/DOE

Seamlessly setup and run optimization and design of experiment (DOE) studies in SimLab

Videos
Automated Weld Mesh

Automated Weld Mesh

Automatically create weldings mesh in SimLab

Videos
Automated Bearings Mesh Creation

Automated Bearings Mesh Creation

Automatically create bearings mesh in SimLab

Videos
Mesh Editing with Face Replace

Mesh Editing with Face Replace

Update model mesh with automated geometry recognition in SimLab

Videos
Generation of Antenna Array Excitation

Generation of Antenna Array Excitation

See how Altair Compose can be used for the automatic generation of antenna array excitations. You can seamlessly perform the necessary calculations, data formatting and output for use with Altair Feko.

Videos
Matelys Showcase Video

Matelys Showcase Video

AlphaCell for quick and accurate sound package design 

Video Testimonials
Lay-Up Simulations to Choose the Best Fabric Pattern for an Aeronautic Radome

Lay-Up Simulations to Choose the Best Fabric Pattern for an Aeronautic Radome

This article focuses on weather radars mounted on small airplanes. They help planning routes before take-off and adapting during the flight depending on weather conditions.

Customer Stories
Energy Finite Element Analysis by MES used to Control Interior Automotive Noise

Energy Finite Element Analysis by MES used to Control Interior Automotive Noise

EFEA uses a library of elements for modeling any physical system.

Customer Stories
Energy Finite Element Analysis by MES used to Control Interior Aircraft Noise

Energy Finite Element Analysis by MES used to Control Interior Aircraft Noise

With EFEA fewer elements are required compared to FEA, alternative designs can be evaluated rapidly enough in order to influence the design.

Customer Stories
Aeroswift

Aeroswift

The South African aviation manufacturing solutions provider Aerosud and the South African Council for Scientific and Industrial Research (CSIR) teamed up to launch a challenging 3D printing project, Aeroswift. Aeroswift collaborated with Altair to develop a methodology for designing large additively

Customer Stories
Using Altair Feko™ to reduce heating during MRI for Deep Brain Stimulation

Using Altair Feko™ to reduce heating during MRI for Deep Brain Stimulation

See how Altair Feko helped reduce heat during MRI procedures in DBS implants.

Customer Stories
GE’s Flow Simulator Increases Lifespan of BHGE’s Gas Turbine

GE’s Flow Simulator Increases Lifespan of BHGE’s Gas Turbine

The BHGE Secondary Flow & Heat Transfer team is dedicated to a large variety of analyses in the gas turbine design process. The scope is the estimation of the secondary air requirements for the entire turbine, including rotor, casing, flow path cooled components, bearings, etc.

Customer Stories
Mahindra Rise

Mahindra Rise

Mahindra & Mahindra is a global pioneer in the transportation business, including automotive, aerospace and the agribusiness. All these systems are required to be interlinked for a properly functioning parent system. Altair created a web business intelligence platform in engineering layers of analyt

Customer Stories
Automated First-time-right Support Generation for Laser Beam Melting with Additive Works’ Amphyon

Automated First-time-right Support Generation for Laser Beam Melting with Additive Works’ Amphyon

Additive Works will replace these extensive iterations by the use of process simulation and optimization to create a support structure first-time-right.

Customer Stories
Empowering Composites Innovation with Simulation

Empowering Composites Innovation with Simulation

Markku Palentera, Director of Global Composites Business Development at Altair, delivers a presentation outlining Altair's composite design and analysis portfolio and details how manufacturers leverage these tools to empowering composites innovation through simulation.

Videos

Fiber Patch Placement Technology

Fiber Patch Placement Technology

Neven Majic, Executive Vice President of Cevotec GmbH discusses the use of fiber patch placement technology to produce additive manufactured composite parts.

Download the Presentati

Videos
Solar Car Challenge: Pushing the Boundaries using Composites Optimization

Solar Car Challenge: Pushing the Boundaries using Composites Optimization

Raphael Gerard, Design Engineer at Gurit, discusses the use of composite optimization with Altair OptiStruct to reduce weight and increase performance in a solar car challenge.

Download the Presenta

Videos
JEC World 2019 Conference - Empowering Composites Innovation with Simulation

JEC World 2019 Conference - Empowering Composites Innovation with Simulation

Altair hosted a conference at the JEC World composites expo in which leading innovators across multiple industries discussed how they leverage computer-aided engineering (CAE) simulation software to design, optimize, and validate their composite structures.

Videos
Duratec

Duratec

Czech company Duratec Ltd. develops handmade bike frames using both aluminium and composite materials. For a recent project at Duratec presenting the latest approach in development of carbon fiber optimization of the bike frame, Altair HyperWorks was used for model creation in Altair HyperMesh, opti

Customer Stories
ESRD StressCheck Aero Wing Flap Video

ESRD StressCheck Aero Wing Flap Video

ESRD StressCheck Aero Wing Flap Fitting Use Case

Videos
Te Ahi Tupa - Hemo Gorge Sculpture

Te Ahi Tupa - Hemo Gorge Sculpture

Employing simulation-driven solutions to develop an iconic sculpture

Customer Stories
Schneider Electric

Schneider Electric

An Altair customer for many years, Schneider Electric at first used only Altair Flux; now the company has extended their usage to several more software products in the Altair HyperWorks suite, including solutions such as Activate, MotionSolve, OptiStruct, and others to apply co-simulation in their d

Customer Stories
Griiip

Griiip

Israeli motorsport company Griiip has designed a new, fast and professional race car that combines efficiency in racing with a competitive purchase price and low running costs, to make it more affordable. By harnessing the power of data, Griiip has created the first smart connected race car – the G1

Customer Stories
AVL Fire - CFD for IC Engine Development

AVL Fire - CFD for IC Engine Development

Introducing Fire M - The easy way to efficient CFD

Videos
Serapid

Serapid

Serapid, the developer and manufacturer of the original Rigid Chain, designs and manufactures telescopic mechanical actuators for the horizontal and vertical movement of heavy loads. See how they use Altair SimSolid™ to aid in gravity loads of complete structure simulation.

Customer Stories
Roth McFarlane Hand and Upper Limb Centre

Roth McFarlane Hand and Upper Limb Centre

See how McFarlane Hand and Upper Limb Centre in London, Ontario is uses Altair SimSolid to evaluate the biomechanics of bone stresses.

Customer Stories
INTECH DMLS Achieves 27% Weight Reduction in 3D Printed Satellite Component using Altair Inspire™ and OptiStruct™

INTECH DMLS Achieves 27% Weight Reduction in 3D Printed Satellite Component using Altair Inspire™ and OptiStruct™

INTECH DMLS is playing the visionary role in the field of metal-based DMLS 3D printing in India since its inception in 2012. The company with this rich expertise in metallurgy and machining, established themselves rapidly as the leader of the Metal Additive Manufacturing industry in India. Sinteneer

Customer Stories
Altair Inspire Form Helps Pragati Engineering Address Sheet Metal Formability and Inconsistent Thinning Issues While Reducing Physical Try-out Time by 50%

Altair Inspire Form Helps Pragati Engineering Address Sheet Metal Formability and Inconsistent Thinning Issues While Reducing Physical Try-out Time by 50%

Pragati Engineering, established in 2004, is one of the leading press tool design and manufacturing companies in India. The company has a national reach and successfully carries out projects riding on the robust shoulders of qualified and dynamic engineers from their Design department and Tool Room

Customer Stories
Imperial Auto has Successfully Validated the Contact Pressure for O-Ring by Contact Analysis using Altair OptiStruct™ Solution

Imperial Auto has Successfully Validated the Contact Pressure for O-Ring by Contact Analysis using Altair OptiStruct™ Solution

Established in the year 1969, Imperial Auto is one of the biggest integrated manufacturers of ‘Fluid Transmission Products (FTPs) in the world. The company has eight dedicated manufacturing and assembly plants in India. The grand vision of the company’s top management can be easily gauged from the s

Customer Stories
Sharda Motors – Usage of Altair CAE Solution for Durability Analysis

Sharda Motors – Usage of Altair CAE Solution for Durability Analysis

Sharda Motor Industries Limited (SMIL) is the market leader in the country in the manufacturing of exhaust systems, catalytic converters, independent suspension systems, seat frames, seat covers (two and four wheelers), soft top canopies, and stamped part for white goods products. Their state-of-the

Customer Stories
Morpheus Hotel

Morpheus Hotel

Morpheus is a newly built, contemporary style hotel in the City of Dreams in Cotai, Macau, that was commissioned to be built by world-renown architectural firm Zaha Hadid Architects in 2012.

Customer Stories
SC18: Talking Altair and PBS Works with insideHPC

SC18: Talking Altair and PBS Works with insideHPC

Rich Brueckner from insideHPC interviews Altair CTO Sam Mahalingam and Chief Scientist Andrea Casotto at SC18 in Dallas. The trio discusses high-performance computing, product design and innovation, and the Altair PBS Works™ HPC software suite.

Videos
Andron Handling

Andron Handling

Andron Handling needed to assess the strength of the welded fabrication and vertical clamping arms for both lifting and clamping loads. In previous analysis of this type in Altair SimSolid™, they would have removed the wheels from the model and applied reaction forces at the bottom of each of the cl

Customer Stories
Integrated Design and Engineering Solutions

Integrated Design and Engineering Solutions

Melbourne-based Integrated Design and Engineering Solutions (IDES) provides full “systems-life-cycle” tailored engineering solutions to fulfill demanding defence requirements. For the LAND 121 Phase 3A project involving the procurement of Mercedes-Benz G-Wagon light trucks for the Australian Army, t

Customer Stories
Have a Question? If you need assistance beyond what is provided above, please contact us.

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!