Top Use Cases: HUByx

Presentation introducing a few of the top use cases for the human FE model, HUByx.

All related resources

The success story of Lundbergs Pressgjuteri

The success story of Lundbergs Pressgjuteri

Mattias Melin tool manager from AB Lundbergs Pressgjuteri uses NovaFlow&Solid to predict future challenges.

Customer Stories
Smart Building Solutions Features

Smart Building Solutions Features

The SmartWorks suite includes Altair SmartEdge™ for device communication, Altair SmartCore™ to manage IoT devices and data, and Altair SmartSight™ for advanced data analytics.

Brochures
Guerrilla Gravity

Guerrilla Gravity

For pioneering a new material application and technology without a road map, Guerrilla Gravity used Altair OptiStruct in the early design design phase. The result was the development of lightweight, high-performance bikes, that are 300% more impact resistant than other frames on the market that use

Customer Stories
Model-Based Development Suite Brochure

Model-Based Development Suite Brochure

Leverage simulation-driven innovation to design and engineer products for concept studies, control design, system performance optimization, controller implementation and testing.

Brochures
Energy Finite Element Analysis by MES used to Control Interior Automotive Noise

Energy Finite Element Analysis by MES used to Control Interior Automotive Noise

EFEA uses a library of elements for modeling any physical system.

Customer Stories
From Die Design to Defect-Free Castings: Shiva Tool Tech Achieves 80% Time Reduction with Altair Inspire Cast

From Die Design to Defect-Free Castings: Shiva Tool Tech Achieves 80% Time Reduction with Altair Inspire Cast

Shiva Tool Tech is an automotive manufacturing focused, industrial powerhouse based in Pune, India. With over 25 years of experience in designing and manufacturing of gravity die casting (GDC), low-pressure die casting (LPDC), high-pressure die casting (HPDC) Dies, the company supports customers fro

Customer Stories
Aeroswift

Aeroswift

The South African aviation manufacturing solutions provider Aerosud and the South African Council for Scientific and Industrial Research (CSIR) teamed up to launch a challenging 3D printing project, Aeroswift. Aeroswift collaborated with Altair to develop a methodology for designing large additively

Customer Stories
Using Altair Feko™ to reduce heating during MRI for Deep Brain Stimulation

Using Altair Feko™ to reduce heating during MRI for Deep Brain Stimulation

See how Altair Feko helped reduce heat during MRI procedures in DBS implants.

Customer Stories
GE’s Flow Simulator Increases Lifespan of BHGE’s Gas Turbine

GE’s Flow Simulator Increases Lifespan of BHGE’s Gas Turbine

The BHGE Secondary Flow & Heat Transfer team is dedicated to a large variety of analyses in the gas turbine design process. The scope is the estimation of the secondary air requirements for the entire turbine, including rotor, casing, flow path cooled components, bearings, etc.

Customer Stories
CONCEPT and RomaxDESIGNER drive more focused, streamlined and low-cost development of innovative products

CONCEPT and RomaxDESIGNER drive more focused, streamlined and low-cost development of innovative products

Hyundai uses CONCEPT by Romax to explore geometry, speed, rating and load dependencies, and carry out dynamic analysis.

Customer Stories
Getting Started with CONCEPT

Getting Started with CONCEPT

This Getting Started Guide provides you with all the basics to start using CONCEPT

Brochures
Mahindra Rise

Mahindra Rise

Mahindra & Mahindra is a global pioneer in the transportation business, including automotive, aerospace and the agribusiness. All these systems are required to be interlinked for a properly functioning parent system. Altair created a web business intelligence platform in engineering layers of analyt

Customer Stories
Automated First-time-right Support Generation for Laser Beam Melting with Additive Works’ Amphyon

Automated First-time-right Support Generation for Laser Beam Melting with Additive Works’ Amphyon

Additive Works will replace these extensive iterations by the use of process simulation and optimization to create a support structure first-time-right.

Customer Stories
Component level simulation of selective laser melting process − VTT Pipe

Component level simulation of selective laser melting process − VTT Pipe

VTT has been testing AM process simulation tools for inclusion in their design for AM workflow. Through these tests, Additive Works’ Amphyon software was found to predict component level geometric distortion values that corresponded well with measurements, give an indication of potential print failu

Customer Stories
Top Use Case Lambda

Top Use Case Lambda

Optical and Illumination Design Software by Lambda Research Corporation

Customer Stories
Te Ahi Tupa - Hemo Gorge Sculpture

Te Ahi Tupa - Hemo Gorge Sculpture

Employing simulation-driven solutions to develop an iconic sculpture

Customer Stories
Griiip

Griiip

Israeli motorsport company Griiip has designed a new, fast and professional race car that combines efficiency in racing with a competitive purchase price and low running costs, to make it more affordable. By harnessing the power of data, Griiip has created the first smart connected race car – the G1

Customer Stories
Delivering Accurate and Standardized Costing with Click2Cost™

Delivering Accurate and Standardized Costing with Click2Cost™

Whether you are costing your own parts and components or your suppliers’, C2C™ provides the data needed to accurately and quickly predict costs.

Brochures
DP CoQTM “Cost of Quality”

DP CoQTM “Cost of Quality”

Combined with the power of Lean Design® DP CoQTM quickly and easily calculates the financial load that each good unit bears to pay for errors, warranty, scrap, rework, and costs of conformance, such as training, inspections, equipment calibration, equipment & tooling maintenance, administrative & te

Brochures
Munro’s Lean Design® process and software will drive efficient product designs that are robust and require less parts.

Munro’s Lean Design® process and software will drive efficient product designs that are robust and require less parts.

The resultant design will be innovative, cost-effective, lighter weight, higher quality, and will launch faster. Lean Design® changes the way we think about product design by identifying problems and waste before they occur.

Brochures
Pranav Vikas Achieves 17% Material Savings with Light Weight and Optimised Product Designs using Altair HyperWorks™ Solutions

Pranav Vikas Achieves 17% Material Savings with Light Weight and Optimised Product Designs using Altair HyperWorks™ Solutions

With over 2 decades of experience in manufacturing Aluminum Heat-exchangers such as Condensers, Evaporators, Heaters, Radiators, Oil Coolers, IHX and Roof AC units, Pranav Vikas (India) Private Limited (PVL) today is one of the largest and most diversified Heat-exchanger manufacturers in India. The

Customer Stories
Sharda Motors – Usage of Altair CAE Solution for Durability Analysis

Sharda Motors – Usage of Altair CAE Solution for Durability Analysis

Sharda Motor Industries Limited (SMIL) is the market leader in the country in the manufacturing of exhaust systems, catalytic converters, independent suspension systems, seat frames, seat covers (two and four wheelers), soft top canopies, and stamped part for white goods products. Their state-of-the

Customer Stories
Morpheus Hotel

Morpheus Hotel

Morpheus is a newly built, contemporary style hotel in the City of Dreams in Cotai, Macau, that was commissioned to be built by world-renown architectural firm Zaha Hadid Architects in 2012.

Customer Stories
Lushan Primary School

Lushan Primary School

Tucked away in a remote location in the mountains, designed by ZHA, the Lushan primary school, when complete, will be an educational institute located 160 kilometers North-West of Nanchang, the capital of China’s Jiangxi province.

Customer Stories
Altair PBS Works: Accelerating Innovation In the Cloud

Altair PBS Works: Accelerating Innovation In the Cloud

Altair transforms design and decision-making by applying simulation, machine learning and optimization throughout product life cycles. Our broad portfolio of simulation technology and patented units-based software licensing model enable Simulation-Driven Innovation™ for our customers.

Brochures
F.tech R&D North America

F.tech R&D North America

F.tech is a Tier-1 automotive systems supplier, headquartered in Japan. To help the CAE team at F.tech R&D North America overcome tedious challenges related to model build and geometry preparation for weld creation, Altair developed a customized solution. Developed using Altair’s Model Mesher Direct

Customer Stories
Integrated Design and Engineering Solutions

Integrated Design and Engineering Solutions

Melbourne-based Integrated Design and Engineering Solutions (IDES) provides full “systems-life-cycle” tailored engineering solutions to fulfill demanding defence requirements. For the LAND 121 Phase 3A project involving the procurement of Mercedes-Benz G-Wagon light trucks for the Australian Army, t

Customer Stories
Infinity BI powered by Altair SmartSight

Infinity BI powered by Altair SmartSight

Infinity.BI is a powerful business analytics module developed by Altair in partnership with Advanced Utility Systems for CIS Infinity® customers. Through a direct integration of Altair’s business intelligence software with the Infinity database schema, this business analytics module provides a r

Customer Stories
Fallbrook Technologies

Fallbrook Technologies

Traction-based, patented NuVinci® transmission is a continuously variable planetary (CVP) technology enabling performance and efficiency improvements for machines that use an engine, pump, motor, or geared transmission systems. Fallbrook Technologies has been working on improving oil flow inside the

Customer Stories
Case Study: Reliability-Based Stochastic Mobility Maps

Case Study: Reliability-Based Stochastic Mobility Maps

This case study shows how RAMDO software, when used in conjunction with computer simulations, provides improved mobility mapping. For efficient mission planning of troop movement, the Department of Defense needs reliable mobility maps. These maps are important for decision makers to plan routes

Customer Stories
Composites Driving Innovation: Development of a Sit-Ski as an Advanced Technology Demonstrator

Composites Driving Innovation: Development of a Sit-Ski as an Advanced Technology Demonstrator

The National Composites Centre (NCC), in collaboration with the Manufacturing Technology Centre (MTC), Advanced Manufacturing Research Centre (AMRC) and University of Warwick (WMG) worked on a collaborative project to develop a Cross-Catapult technology demonstrator; the Mono-Ski or Sit-ski, a devic

Customer Stories
Hussmann India Achieves Greater Simulation Accuracy with Altair AcuSolve™

Hussmann India Achieves Greater Simulation Accuracy with Altair AcuSolve™

Hussmann provides tailored food safety solutions designed to improve food quality and integrity. As the manufacturer of refrigerated display cases and systems, they have to maintain the highest performance and quality standards of the products they develop. Using Altair solutions helped them reduce

Customer Stories
APA for Heavy Industry

APA for Heavy Industry

Flyer highlighting some of the main areas in heavy industry addressed by APA partner products.

Brochures
Mabe

Mabe

Mabe is a Mexico-based international appliance company designing, producing and distributing a wide spectrum of home appliances such as washing machines, dryers, cooking ranges, refrigerators, air-conditioners, microwaves, etc. Altair technology has enabled Mabe to increase the capacity of their was

Customer Stories
DSA uses HyperWorks to Streamline its Marine Hydrodynamics Analysis with ProteusDS and ShipMo3D

DSA uses HyperWorks to Streamline its Marine Hydrodynamics Analysis with ProteusDS and ShipMo3D

APA Partner, DSA, uses Altair HyperMesh, AcuSolve, and Virtual Wind Tunnel to create high-quality hydrodynamic mesh and models for ship and marine structures.

Customer Stories
Optimisation of a Collapsible Economic Container “COLLAPSECON"

Optimisation of a Collapsible Economic Container “COLLAPSECON"

At the forefront of innovation at CEC Systems is the world’s first semi-automated Collapsible-Economic-Container. Achieving a 4:1 ratio, COLLAPSECON® enables 4 empty containers to be collapsed and combined to form a single container, improving operational efficiency, enhancing return on investment a

Customer Stories
Partner Spotlight: Key to Metals

Partner Spotlight: Key to Metals

Interview with Key to Metals COO Neil Baumann.

Brochures
LOGEresearch Brochure

LOGEresearch Brochure

Overview of LOGEresearch's features and capabilities.

Brochures
XLSE Product Brief

XLSE Product Brief

Short presentation introducing the XLSE module of the model based system engineering software XLDyn.

Brochures
TracePro Brochure

TracePro Brochure

Illumination Design, Analysis, and Optimization Software

Brochures
Have a Question? If you need assistance beyond what is provided above, please contact us.

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!