NEVS Uses Simulation Driven Innovation in Car Body Design

Dr. Lars Fredriksson, Business VP – Simulation Driven Innovation at Altair presenting on behalf of NEVS at the 2017 European ATC.

The automotive industry is experiencing ever increasing requirements on new vehicles from all directions. Still, development cycles must be shortened and development costs reduced. Early concept development is a project stage where change costs are low and design freedom large. Thus, improvement of early concept development to mature designs faster and with better design balance must be a key goal of vehicle development.

All related resources

Socomec & Altair SmartWorks - Delivering Leading-Edge IoT Solutions

Socomec & Altair SmartWorks - Delivering Leading-Edge IoT Solutions

France-based Socomec’s specialty is providing low-voltage energy installations, from equipment to monitoring, where energy is critical – robust and ultra-reliable solutions for buildings like datacenters, solar plants, utilities, and hospitals. Using Altair SmartWorks™, has enabled Socomec to implem

Video Testimonials
Chiastek Showcase Video

Chiastek Showcase Video

4-minute video introduction showcasing CosiMate as a platform for modeling and visualization, analysis and optimization in the automotive and aerospace industry.

Video Testimonials
Matelys Showcase Video

Matelys Showcase Video

AlphaCell for quick and accurate sound package design 

Video Testimonials
Slotless-Halbach Lightweight Electric Machines and Unconventional Multi Layer Winding

Slotless-Halbach Lightweight Electric Machines and Unconventional Multi Layer Winding

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations
Altair Flux and FluxMotor - Roadmap

Altair Flux and FluxMotor - Roadmap

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations
Analysis of Static Eccentricity Faults in Double Stator Single Rotor Axial Flux Surface-mounted Permanent Magnet Motors

Analysis of Static Eccentricity Faults in Double Stator Single Rotor Axial Flux Surface-mounted Permanent Magnet Motors

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations
Flux & Flux Motor: A Preview from the Inside

Flux & Flux Motor: A Preview from the Inside

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations
Switched Reluctance Motor (SRM) Multiphysics Simulation

Switched Reluctance Motor (SRM) Multiphysics Simulation

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations
Design the Future e-Mobility

Design the Future e-Mobility

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations
Using Workflow Automation Tools for the Multi-physics Optimization of Traction Motors

Using Workflow Automation Tools for the Multi-physics Optimization of Traction Motors

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations
Shielding Benchmark: Static Shielding and Eddy Current Shielding

Shielding Benchmark: Static Shielding and Eddy Current Shielding

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations
Tech-X Showcase Video

Tech-X Showcase Video

Tech-X Software for Electromagnetics and Plasma

Video Testimonials
System Optimization with Altair MotionSolve 

System Optimization with Altair MotionSolve 

This presentation was given at the 2019 ATCx Multibody & System Simulation conference at the Altair Headquarters in Troy, MI.

ATC Presentations
Altair Inspire Motion - An Overview 

Altair Inspire Motion - An Overview 

This presentation was given at the 2019 ATCx Multibody & System Simulation conference at the Altair Headquarters in Troy, MI.

ATC Presentations
Vehicle Modeling in MotionView and MotionSolve 

Vehicle Modeling in MotionView and MotionSolve 

This presentation was given at the 2019 ATCx Multibody & System Simulation conference at the Altair Headquarters in Troy, MI.

ATC Presentations
The Altair Motion Solution

The Altair Motion Solution

This presentation was given at the 2019 ATCx Multibody & System Simulation conference at the Altair Headquarters in Troy, MI.

ATC Presentations
ICAT Meets Automotive Safety and Regulatory Requirements with Altair Simulation Software

ICAT Meets Automotive Safety and Regulatory Requirements with Altair Simulation Software

ICAT is one of the leading centres for testing, R&D, design, development and validation in support of a Government of India funded initiative to develop facilities for automotive testing & development. To meet the challenges of the automotive industry, they need to employ optimization to decrease v

Video Testimonials
A Motivating, Inspirational Forum for Learning: Thoughts from Attendees at the 2018 Global ATC

A Motivating, Inspirational Forum for Learning: Thoughts from Attendees at the 2018 Global ATC

Thoughts from attendees express the energy and passion emanating through the exchange of knowledge, information, ideas and stories by technology leaders and industry executives at the 2018 Global Altair Technology Conference.

Video Testimonials
Truck Ride Comfort Analysis by Using Compose and MotionSolve

Truck Ride Comfort Analysis by Using Compose and MotionSolve

Ride comfort analysis modeling and ride comfort evaluation done in Altair Compose and Altair MotionSolve.

ATC Presentations
DSA Showcase Video

DSA Showcase Video

A brief introduction to DSA, their two products available through the APA, and how they are applied to the oceanographic engineering process.

Video Testimonials
Optimization of Spacecraft Metallic Primary Structure with OptiStruct

Optimization of Spacecraft Metallic Primary Structure with OptiStruct

Spacecraft primary structure is designed to react all the major loads imparted on a spacecraft. Inadequately designed or tested primary structure can result in structure failure during launch and endanger mission success. To maximize the useful payload to orbit, primary structures are typically desi

ATC Presentations
Durability Workshop

Durability Workshop

On September 27th, OptiStruct users presented the latest capabilities and advancements in simulation-driven design methods for noise and vibration, durability and fatigue solutions. In addition, Altair experts showcased the unique OptiStruct development workflow which allows a baseline model to be a

ATC Presentations
ThermoAnalytics Showcase Video

ThermoAnalytics Showcase Video

Introductory video to TAITherm from ThermoAnalytics.

Video Testimonials
AVL Showcase Video

AVL Showcase Video

A brief introduction to AVL, their three products available through the APA, and how they are applied to the powertrain development process.

Video Testimonials
Design Lightweight and Efficient Stamping Dies with Topology Optmization

Design Lightweight and Efficient Stamping Dies with Topology Optmization

Ford Otosan in Turkey designs big stamping dies with the help of topology optimization using OptiStruct. Weight savings of 20% were possible on their first attempt to try optimization on a new stamping part.

Video Testimonials
Coupling Flux with OptiStruct for Acoustic Analysis

Coupling Flux with OptiStruct for Acoustic Analysis

Altair’s low-frequency electromagnetic and thermal software, Flux™, offers a complete range of modeling tools able to take into account model specifications and streamline the design process. Capitalizing on 36 years of innovation in the global context of design optimization and time-to-market r

ATC Presentations
Design of an Axial Flux Machine: Simulation and Challenges

Design of an Axial Flux Machine: Simulation and Challenges

Altair’s low-frequency electromagnetic and thermal software, Flux™, offers a complete range of modeling tools able to take into account model specifications and streamline the design process. Capitalizing on 36 years of innovation in the global context of design optimization and time-to-market r

ATC Presentations
Design of Interior Permanent Magnet Machines for Traction Application using Flux Modules

Design of Interior Permanent Magnet Machines for Traction Application using Flux Modules

Altair’s low-frequency electromagnetic and thermal software, Flux™, offers a complete range of modeling tools able to take into account model specifications and streamline the design process. Capitalizing on 36 years of innovation in the global context of design optimization and time-to-market r

ATC Presentations
What Can We Learn from Nature for Modern Architecture Structures?

What Can We Learn from Nature for Modern Architecture Structures?

Eric Rusinol, an Architect from The Sagrada Família Foundation, gives us some insight into the project to finish Antoni Gaudí's iconic Cathedral in Barcelona, touching on the teams use of optimization and concept generations technologies from Altair.

Video Testimonials
Brüel & Kjær Showcase Video

Brüel & Kjær Showcase Video

Interview with Dave Bogema, Product Manager - NVH Refinement at B&K, presented at the 2017 Americas ATC East in Detroit, Michigan.

Video Testimonials
Intelligent Light Showcase Video

Intelligent Light Showcase Video

Yves-Marie Lefebvre, FieldView Product Chief at Intelligent Light, presented at the 2017 EATC in Frankenthal, Germany. Check out his one-on-one interview!

Video Testimonials
Additive Works Showcase Video

Additive Works Showcase Video

Nils Keller, Additive Works CEO, presented at the 2017 EATC in Frankenthal, Germany. Check out his one-on-one interview!

Video Testimonials
Lattice Optimized Brake Pedal Study

Lattice Optimized Brake Pedal Study

The following presentation reviews the design and development of a Lattice Optimized (LO) automotive brake pedal. The goal of the study was to compare the potential weight savings from utilizing a lattice optimization approach along with validating the simulation results. The brake pedal was chosen

ATC Presentations
Automatic Reproduction of Supervisory Control System Logic Diagrams with High Fidelity Functional Simulation Purposes using SolidThinking Embed

Automatic Reproduction of Supervisory Control System Logic Diagrams with High Fidelity Functional Simulation Purposes using SolidThinking Embed

This work presents the GT2 Energia methodology for the automated creation of control logics for high fidelity simulators of industrial plants. The manual development of this activity involves intrinsic difficulties due to the typical large amount of control logics in an industrial plant controller,

ATC Presentations
Using Flux2D in Development of PMSM Fault Detection Algorithms

Using Flux2D in Development of PMSM Fault Detection Algorithms

The need for fail-safe operation of permanent magnet synchronous machines in applications requiring high reliability has prompted the development of techniques for detecting incipient stator winding faults, rotor eccentricities and demagnetization of permanent magnets. It is desired to detect the pr

ATC Presentations
Integral Numerical Characterization of Thermal and Lubrication Performance of Hybrid and Electric Drive Systems

Integral Numerical Characterization of Thermal and Lubrication Performance of Hybrid and Electric Drive Systems

The physics of the simulated processes is inherently multiphase and involves transient phenomena of various time scales. As such, high fidelity simulation resolution places significant demands on hardware performance, external computing on-demand resource availability as well as flexible and streaml

ATC Presentations
Efficient Electromagnetic Actuator Prototype Design with Flux

Efficient Electromagnetic Actuator Prototype Design with Flux

Bitron is an automotive company producing mechatronic devices, such as actuators, sensors and switches. Siska Verhamme and Pablo Avarez, both Engineers at Bitron, describe their challenges and how Flux can help them, to accelerate the design process.

Video Testimonials
HPCwire Interview at SC

HPCwire Interview at SC'16

Watch to learn about the open source project and new products being added to the PBS Works suite.

Video Testimonials
Cal Poly Pomona Uses HyperWorks to Design a Winning Formula SAE Racecar

Cal Poly Pomona Uses HyperWorks to Design a Winning Formula SAE Racecar

Cal Poly Pomona applies HyperWorks to optimize the design of a new wheel shell and analyze laminates for a SAE Formula student racecar.

Video Testimonials
Digital Development at Hyundai Motor Group

Digital Development at Hyundai Motor Group

Dr. Byungsik Kang is explaining how upfront engineering with FEA methods made a big impact at Hyundai Motor Group. He also explains the importance of designers using simulation for their own need at the early stage of development. Last but not least he is talking about the power of the solver OptiSt

Video Testimonials
Have a Question? If you need assistance beyond what is provided above, please contact us.

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!