Artemis Racing’s use of Simulation Driven Design Technology in Pursuit of the 2017 America’s Cup

Peter Bentley, Design Team Member at Artemis Racing presents at the 2017 European ATC.

The increase in velocity enabled by advanced structural composites and on-board control systems has been a true game changer, and the future of sailing will be increasing dependent on simulation driven design.

All related resources

The Multiphysics Optimization Platform for e-Motor Innovation

The Multiphysics Optimization Platform for e-Motor Innovation

Altair develops multiphysics simulation technologies that allow you to accelerate next generation mobility solutions development. From smart control design to powertrain electrification and vehicle architecture studies, our solutions enable optimization throughout the development cycle, all backed u

Videos
Spot Weld Fatigue

Spot Weld Fatigue

This video shows the typical workflow to perform a spot weld fatigue analysis with HyperLife.

Videos
Stress Life Analysis

Stress Life Analysis

This video shows the typical workflow to perform a stress life analysis in HyperLife.

Videos
Seam Weld Fatigue

Seam Weld Fatigue

This video shows the typical workflow to perform a seam weld fatigue analysis with HyperLife.

Videos
SimLab Automated Results

SimLab Automated Results

Improve CAE accuracy with automated results convergence

Videos
Integration CAD/FEA for Optimization/DOE

Integration CAD/FEA for Optimization/DOE

Seamlessly setup and run optimization and design of experiment (DOE) studies in SimLab

Videos
Automated Weld Mesh

Automated Weld Mesh

Automatically create weldings mesh in SimLab

Videos
Automated Bearings Mesh Creation

Automated Bearings Mesh Creation

Automatically create bearings mesh in SimLab

Videos
Mesh Editing with Face Replace

Mesh Editing with Face Replace

Update model mesh with automated geometry recognition in SimLab

Videos
Automated LBCs Assignment

Automated LBCs Assignment

Automatically assign load boundary conditions (LBCs) in SimLab

Videos
Generation of Antenna Array Excitation

Generation of Antenna Array Excitation

See how Altair Compose can be used for the automatic generation of antenna array excitations. You can seamlessly perform the necessary calculations, data formatting and output for use with Altair Feko.

Videos
Slotless-Halbach Lightweight Electric Machines and Unconventional Multi Layer Winding

Slotless-Halbach Lightweight Electric Machines and Unconventional Multi Layer Winding

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations
Altair Flux and FluxMotor - Roadmap

Altair Flux and FluxMotor - Roadmap

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations
Analysis of Static Eccentricity Faults in Double Stator Single Rotor Axial Flux Surface-mounted Permanent Magnet Motors

Analysis of Static Eccentricity Faults in Double Stator Single Rotor Axial Flux Surface-mounted Permanent Magnet Motors

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations
Flux & Flux Motor: A Preview from the Inside

Flux & Flux Motor: A Preview from the Inside

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations
Switched Reluctance Motor (SRM) Multiphysics Simulation

Switched Reluctance Motor (SRM) Multiphysics Simulation

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations
Design the Future e-Mobility

Design the Future e-Mobility

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations
Using Workflow Automation Tools for the Multi-physics Optimization of Traction Motors

Using Workflow Automation Tools for the Multi-physics Optimization of Traction Motors

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations
Shielding Benchmark: Static Shielding and Eddy Current Shielding

Shielding Benchmark: Static Shielding and Eddy Current Shielding

This presentation was given on April 11, 2019 at ATCx Electromechanical Applications in Troy, MI.

ATC Presentations
JEC World 2019 Conference - Empowering Composites Innovation with Simulation

JEC World 2019 Conference - Empowering Composites Innovation with Simulation

Altair hosted a conference at the JEC World composites expo in which leading innovators across multiple industries discussed how they leverage computer-aided engineering (CAE) simulation software to design, optimize, and validate their composite structures.

Videos
Empowering Composites Innovation with Simulation

Empowering Composites Innovation with Simulation

Markku Palentera, Director of Global Composites Business Development at Altair, delivers a presentation outlining Altair's composite design and analysis portfolio and details how manufacturers leverage these tools to empowering composites innovation through simulation.

Videos

Virtual Material Characterization Using Multiscale Technology

Virtual Material Characterization Using Multiscale Technology

Jens Bold, Structural Analysis Engineer from Boeing Research & Technology, delivers a presentation on virtual material characterization using Altair Multiscale Designer

Dow

Videos
Fiber Patch Placement Technology

Fiber Patch Placement Technology

Neven Majic, Executive Vice President of Cevotec GmbH discusses the use of fiber patch placement technology to produce additive manufactured composite parts.

Download the Presentati

Videos
Solar Car Challenge: Pushing the Boundaries using Composites Optimization

Solar Car Challenge: Pushing the Boundaries using Composites Optimization

Raphael Gerard, Design Engineer at Gurit, discusses the use of composite optimization with Altair OptiStruct to reduce weight and increase performance in a solar car challenge.

Download the Presenta

Videos
ESRD StressCheck Aero Wing Flap Video

ESRD StressCheck Aero Wing Flap Video

ESRD StressCheck Aero Wing Flap Fitting Use Case

Videos
AVL Fire - CFD for IC Engine Development

AVL Fire - CFD for IC Engine Development

Introducing Fire M - The easy way to efficient CFD

Videos
System Optimization with Altair MotionSolve 

System Optimization with Altair MotionSolve 

This presentation was given at the 2019 ATCx Multibody & System Simulation conference at the Altair Headquarters in Troy, MI.

ATC Presentations
Altair Inspire Motion - An Overview 

Altair Inspire Motion - An Overview 

This presentation was given at the 2019 ATCx Multibody & System Simulation conference at the Altair Headquarters in Troy, MI.

ATC Presentations
Vehicle Modeling in MotionView and MotionSolve 

Vehicle Modeling in MotionView and MotionSolve 

This presentation was given at the 2019 ATCx Multibody & System Simulation conference at the Altair Headquarters in Troy, MI.

ATC Presentations
The Altair Motion Solution

The Altair Motion Solution

This presentation was given at the 2019 ATCx Multibody & System Simulation conference at the Altair Headquarters in Troy, MI.

ATC Presentations
SC18: Talking Altair and PBS Works with insideHPC

SC18: Talking Altair and PBS Works with insideHPC

Rich Brueckner from insideHPC interviews Altair CTO Sam Mahalingam and Chief Scientist Andrea Casotto at SC18 in Dallas. The trio discusses high-performance computing, product design and innovation, and the Altair PBS Works™ HPC software suite.

Videos
Calculation Management with Maple

Calculation Management with Maple

Maple is a software tool that can handle all your mathematical needs, from performing simple calculations to advanced computations, visualizations, data analysis, and algorithm development. In this video, you’ll see how Maple also helps you maximize the value of your calculation efforts, reducing ri

Videos
Oracle Cloud: Altair ultraFluidX™ and Altair nanoFluidX™

Oracle Cloud: Altair ultraFluidX™ and Altair nanoFluidX™

Altair was founded in 1985 with a vision to use simulation to drive design and decision-making. Through the years simulation has evolved from the back end of the design process to the front — and today's cloud infrastructure opens up new possibilities to solve problems of unlimited size.

Videos
Truck Ride Comfort Analysis by Using Compose and MotionSolve

Truck Ride Comfort Analysis by Using Compose and MotionSolve

Ride comfort analysis modeling and ride comfort evaluation done in Altair Compose and Altair MotionSolve.

ATC Presentations
Optimization of Spacecraft Metallic Primary Structure with OptiStruct

Optimization of Spacecraft Metallic Primary Structure with OptiStruct

Spacecraft primary structure is designed to react all the major loads imparted on a spacecraft. Inadequately designed or tested primary structure can result in structure failure during launch and endanger mission success. To maximize the useful payload to orbit, primary structures are typically desi

ATC Presentations
Durability Workshop

Durability Workshop

On September 27th, OptiStruct users presented the latest capabilities and advancements in simulation-driven design methods for noise and vibration, durability and fatigue solutions. In addition, Altair experts showcased the unique OptiStruct development workflow which allows a baseline model to be a

ATC Presentations
Altair FEKO for Marine EMC Applications

Altair FEKO for Marine EMC Applications

Altair FEKO is a leading comprehensive electromagnetic analysis software package, which is widely used in many industries and built on state of the art computational electromagnetic techniques to provide users with solutions to a wide range of electromagnetic problems. FEKO has been applied extensiv

Videos
What are the Concept Challenges?

What are the Concept Challenges?

See how the C123 process helps you to find concept challenges.

Videos
Altair

Altair

Altair Inspire Form feasibility workflow videos.

Videos
RAMDO Showcase Video

RAMDO Showcase Video

Introductory Video to RAMDO from RAMDO Solutions. RAMDO is an uncertainty quantification, reliability analysis, and design optimization software platform.

Videos
Have a Question? If you need assistance beyond what is provided above, please contact us.

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!