ICAT Meets Automotive Safety and Regulatory Requirements with Altair Simulation Software

ICAT is one of the leading centres for testing, R&D, design, development and validation in support of a Government of India funded initiative to develop facilities for automotive testing & development. To meet the challenges of the automotive industry, they need to employ optimization to decrease vehicle weight while maintaining proper strength. For a major challenge for the rollover testing for bus industry, they used Altair Radioss for roll over simulation and Altair OptiStruct for optimization leading to shortened development time for their customers by over 50%.

All Video Testimonials

Socomec & Altair SmartWorks - Delivering Leading-Edge IoT Solutions

Socomec & Altair SmartWorks - Delivering Leading-Edge IoT Solutions

France-based Socomec’s specialty is providing low-voltage energy installations, from equipment to monitoring, where energy is critical – robust and ultra-reliable solutions for buildings like datacenters, solar plants, utilities, and hospitals. Using Altair SmartWorks™, has enabled Socomec to implem

Video Testimonials
Chiastek Showcase Video

Chiastek Showcase Video

4-minute video introduction showcasing CosiMate as a platform for modeling and visualization, analysis and optimization in the automotive and aerospace industry.

Video Testimonials
Matelys Showcase Video

Matelys Showcase Video

AlphaCell for quick and accurate sound package design 

Video Testimonials
Tech-X Showcase Video

Tech-X Showcase Video

Tech-X Software for Electromagnetics and Plasma

Video Testimonials
ICAT Meets Automotive Safety and Regulatory Requirements with Altair Simulation Software

ICAT Meets Automotive Safety and Regulatory Requirements with Altair Simulation Software

ICAT is one of the leading centres for testing, R&D, design, development and validation in support of a Government of India funded initiative to develop facilities for automotive testing & development. To meet the challenges of the automotive industry, they need to employ optimization to decrease v

Video Testimonials
A Motivating, Inspirational Forum for Learning: Thoughts from Attendees at the 2018 Global ATC

A Motivating, Inspirational Forum for Learning: Thoughts from Attendees at the 2018 Global ATC

Thoughts from attendees express the energy and passion emanating through the exchange of knowledge, information, ideas and stories by technology leaders and industry executives at the 2018 Global Altair Technology Conference.

Video Testimonials
DSA Showcase Video

DSA Showcase Video

A brief introduction to DSA, their two products available through the APA, and how they are applied to the oceanographic engineering process.

Video Testimonials
ThermoAnalytics Showcase Video

ThermoAnalytics Showcase Video

Introductory video to TAITherm from ThermoAnalytics.

Video Testimonials
AVL Showcase Video

AVL Showcase Video

A brief introduction to AVL, their three products available through the APA, and how they are applied to the powertrain development process.

Video Testimonials
Design Lightweight and Efficient Stamping Dies with Topology Optmization

Design Lightweight and Efficient Stamping Dies with Topology Optmization

Ford Otosan in Turkey designs big stamping dies with the help of topology optimization using OptiStruct. Weight savings of 20% were possible on their first attempt to try optimization on a new stamping part.

Video Testimonials
What Can We Learn from Nature for Modern Architecture Structures?

What Can We Learn from Nature for Modern Architecture Structures?

Eric Rusinol, an Architect from The Sagrada Família Foundation, gives us some insight into the project to finish Antoni Gaudí's iconic Cathedral in Barcelona, touching on the teams use of optimization and concept generations technologies from Altair.

Video Testimonials
Brüel & Kjær Showcase Video

Brüel & Kjær Showcase Video

Interview with Dave Bogema, Product Manager - NVH Refinement at B&K, presented at the 2017 Americas ATC East in Detroit, Michigan.

Video Testimonials
Intelligent Light Showcase Video

Intelligent Light Showcase Video

Yves-Marie Lefebvre, FieldView Product Chief at Intelligent Light, presented at the 2017 EATC in Frankenthal, Germany. Check out his one-on-one interview!

Video Testimonials
Additive Works Showcase Video

Additive Works Showcase Video

Nils Keller, Additive Works CEO, presented at the 2017 EATC in Frankenthal, Germany. Check out his one-on-one interview!

Video Testimonials
Efficient Electromagnetic Actuator Prototype Design with Flux

Efficient Electromagnetic Actuator Prototype Design with Flux

Bitron is an automotive company producing mechatronic devices, such as actuators, sensors and switches. Siska Verhamme and Pablo Avarez, both Engineers at Bitron, describe their challenges and how Flux can help them, to accelerate the design process.

Video Testimonials
HPCwire Interview at SC

HPCwire Interview at SC'16

Watch to learn about the open source project and new products being added to the PBS Works suite.

Video Testimonials
Cal Poly Pomona Uses HyperWorks to Design a Winning Formula SAE Racecar

Cal Poly Pomona Uses HyperWorks to Design a Winning Formula SAE Racecar

Cal Poly Pomona applies HyperWorks to optimize the design of a new wheel shell and analyze laminates for a SAE Formula student racecar.

Video Testimonials
Digital Development at Hyundai Motor Group

Digital Development at Hyundai Motor Group

Dr. Byungsik Kang is explaining how upfront engineering with FEA methods made a big impact at Hyundai Motor Group. He also explains the importance of designers using simulation for their own need at the early stage of development. Last but not least he is talking about the power of the solver OptiSt

Video Testimonials
Tokyo Institute of Technology

Tokyo Institute of Technology

Tokyo Institute of Technology discusses the benefits of using PBS Professional.

Video Testimonials
Wayne State University

Wayne State University

Wayne State University discusses their use of PBS Professional.

Video Testimonials
Additive Manufacturing of a Satellite Antenna Bracket

Additive Manufacturing of a Satellite Antenna Bracket

Analysis and design of a 3D printed antenna support for the Sentinel-1b satellite by RUAG Space with Altair Products.

Video Testimonials
University of Tsukuba

University of Tsukuba

Dr. Taisuke Boku, Deputy Director of University of Tsukuba, discusses how PBS Professional has helped manage the university's supercomputer business.

Video Testimonials
Ping Golf: Using CAE and HPC for Virtual Prototyping

Ping Golf: Using CAE and HPC for Virtual Prototyping

In this short interview Eric Morales, Sr Research Engineer at PING Golf, explains how combining CAE simulation with the latest HPC technology has greatly reduced product development time.

Video Testimonials
Specialized Wins at Le Tour de France with Altair HyperWorks

Specialized Wins at Le Tour de France with Altair HyperWorks

Learn how Specialized analyzed and improved the aerodynamic performance as well as optimized the weight and structural efficiency of the new S-Works Venge frame.

Video Testimonials
Ford

Ford's Thoughts on Relationship with Altair for Lightweighting

John Viera, Global Director, Sustainability and Vehicle Environmental Matters at Ford Motor Company, gives his thoughts on the relationship with Altair and its importance as the company continues to drive down vehicle weight.

Video Testimonials
City University of New York (CUNY)

City University of New York (CUNY)

Listen to the City University of New York talk about their success using Altair’s PBS Professional for HPC workload management.

Video Testimonials
Ford Research Center - Interview with Dr. Niels Pasligh

Ford Research Center - Interview with Dr. Niels Pasligh

Niels Pasligh from Ford Research Center Aachen, Germany, is talking about his team's challenges and how they work with Altair products to tackle these.

Video Testimonials
Weizmann Institute

Weizmann Institute

Watch this interview to see why Weizmann Institute switched to PBS Professional and Altair for HPC workload management.

Video Testimonials
Imperial College London

Imperial College London

Watch this interview to see how Imperial College London benefits from using PBS Professional for cluster workload management.

Video Testimonials
Speed and Safety- Interview with Luca Pignacca of Dallara Automobili

Speed and Safety- Interview with Luca Pignacca of Dallara Automobili

Manufacturing and supply of Racing Cars, Dallara Automobili uses HyperWorks to help design all of their racing cars.

Video Testimonials
Kirchhoff Automotive

Kirchhoff Automotive

Hear how Kirchhoff Automotive improves resource utilization with the PBS Works suite of HPC solutions.

Video Testimonials
TK Mattingly Discusses Water Landing Simulation of the NASA Orion Crew Module

TK Mattingly Discusses Water Landing Simulation of the NASA Orion Crew Module

T.K. Mattingly, former Apollo Astronaut and Director of Space Enterprise for Systems Planing and Analysis, reveals how he worked with Altair ProductDesign to simulate the water landing of the NASA Orion Crew Module.

Video Testimonials
Have a Question? If you need assistance beyond what is provided above, please contact us.

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!