Heavy Equipment Simulations: Multi-body, Hydraulics and DEM

Presenter: Ronald Kett, Technical Specialist, Altair

For a Stewart-Gough-Platform (Hexapod), various software tools were used to study and design highly dynamic hydraulic drives together with an overall system control. Calculation of Eigenfrequencies, control design and comparison, hydraulic system design, and overall simulation control were done in Altair Activate, the mechanics of the Stewart-Gough-Platform was taken from a CAD model into Altair Inspire Motion. The co-simulation between control + hydraulics and mechanics was performed using Activate and Altair MotionSolve. Altair HyperView and HyperGraph were used to analyze and visualize the results. With the highly integrated solutions, the results could be achieved within a very short time. The different types of models (linear/simplified/full mechanics/hydraulics) made it possible to start with fast development cycles and finally achieve reliable results.
Have a Question? If you need assistance beyond what is provided above, please contact us.