Resource Library

SimSolid Drives Down Analysis Time at Don-Bur

Truck trailer manufacturer, Don-Bur, discuss the challenges its engineering team was having with simulation in SolidWorks, and how a move to SimSolid has cut its simulation time from hours to a just few minutes.

Video Testimonials

The Multiphysics Optimization Platform for e-Motor Innovation

Altair develops multiphysics simulation technologies that allow you to accelerate next generation mobility solutions development. From smart control design to powertrain electrification and vehicle architecture studies, our solutions enable optimi...

Videos

Delivering Leading-Edge IoT Solutions

France-based Socomec’s specialty is providing low-voltage energy installations, from equipment to monitoring, where energy is critical – robust and ultra-reliable solutions for buildings like datacenters, solar plants, utilities, and hospitals. Us...

Customer Stories, Customer Testimonials

A Unique Car Concept for Urban Space

Udi Meridor, Chief Innovation Officer at Israeli startup, City Transformer, talks about the thinking behind the design of this revolutionary design for urban transport. They have decided to rethink the future of the city car and create a cleaner ...

Customer Stories, Videos

スマートプラグで充電器業界にイノベーション - Altairスタートアッププログラム

French startup Gulplug, located in Grenoble, France, has set out to revolutionize plug and charging technology used in today's electric and hybrid vehicles. To create new products and to drive innovation in the market, Gulplug is using Altair Flux...

Customer Stories, Customer Testimonials

Smart Plug for Startup: Gulplug Drives Innovation in the Charging Industry with Altair's Startup Program

French startup Gulplug, located in Grenoble, France, has set out to revolutionize plug and charging technology used in today's electric and hybrid vehicles. To create new products and to drive innovation in the market, Gulplug is using Altair Flux...

Customer Stories, Customer Testimonials

Gulplug Drives Innovation in the Charging Industry with Altair's Startup Program

Xavier Pain, Founder & CEO at Gulplug, discusses how Altair's Startup Program enabled his team create an autonomous magnetic based charging solution for electric vehicles.

Customer Testimonials

Simulation, 3D Printing and Casting: The Perfect Symbiosis for Large Aerospace Structures

SOGECLAIR aerospace, part of the SOGECLAIR S.A. group, is a major engineering partner and prime
contractor for the aerospace industry. For the design of an aircraft access door, to leverage the full potential of the combined methods of additive manufacturing and casting, SOGECLAIR used the Altair

Customer Stories, Customer Testimonials

What Can We Learn from Nature for Modern Architecture Structures?

Eric Rusinol, an Architect from The Sagrada Família Foundation, gives us some insight into the project to finish Antoni Gaudí's iconic Cathedral in Barcelona, touching on the teams use of optimization and concept generations technologies from Alta...

Video Testimonials

What’s the Secret to Product Innovation?

Find out how we can help increase your innovation intelligence™ in order to grow, expand and succeed.

Videos

Additive Manufacturing of a Satellite Antenna Bracket

Analysis and design of a 3D printed antenna support for the Sentinel-1b satellite by RUAG Space with Altair Products.

Video Testimonials

Ping Golf: Using CAE and HPC for Virtual Prototyping

In this short interview Eric Morales, Sr Research Engineer at PING Golf, explains how combining CAE simulation with the latest HPC technology has greatly reduced product development time.

Video Testimonials

Specialized Wins at Le Tour de France with Altair HyperWorks

Learn how Specialized analyzed and improved the aerodynamic performance as well as optimized the weight and structural efficiency of the new S-Works Venge frame.

Video Testimonials

Ford's Thoughts on Relationship with Altair for Lightweighting

John Viera, Global Director, Sustainability and Vehicle Environmental Matters at Ford Motor Company, gives his thoughts on the relationship with Altair and its importance as the company continues to drive down vehicle weight.

Video Testimonials

Ford Research Center - Interview with Dr. Niels Pasligh

Niels Pasligh from Ford Research Center Aachen, Germany, is talking about his team's challenges and how they work with Altair products to tackle these.

Video Testimonials

Honeywell Aerospace - Reducing the Weight of Aircraft Engines

Brian Cottrell, Chief of Structures at Honeywell Aerospace, discusses how Altair ProductDesign applied HyperWorks' optimization technology, OptiStruct, to minimize the weight of new aircraft engines.

Videos

Speed and Safety- Interview with Luca Pignacca of Dallara Automobili

Manufacturing and supply of Racing Cars, Dallara Automobili uses HyperWorks to help design all of their racing cars.

Video Testimonials

RUAG Space Builds Reliable Satellites with HyperWorks

“Throughput time” or “Time to Market” is a key element for spacecraft structure. Structures are the first element required to start the integration of the spacecraft and it is essential that they can be delivered in time. However, late inputs requ...

Videos

Phil Hall from Caterham Composites Discusses a Composite Optimization for a Racing Yacht

Phil Hall, Managing Director of Caterham Composites, discusses some of the challenges involved in the design and manufacture of carbon fiber composites for the automotive and aerospace markets. During the interview, Phil reveals details of a joint...

Videos

TK Mattingly Discusses Water Landing Simulation of the NASA Orion Crew Module

T.K. Mattingly, former Apollo Astronaut and Director of Space Enterprise for Systems Planing and Analysis, reveals how he worked with Altair ProductDesign to simulate the water landing of the NASA Orion Crew Module.

Video Testimonials

Interview with Richard Slade on the EADS Astrium ExoMars Project

This interview with Richard Slade from EADS Astrium gives an insight into the ExoMars Space exploration project. Richard discusses the goals of the project and some of the engineering challenges faced when designing the landing systems for the Rov...

Videos

Altair Mold Overview

Inspire Mold is a complete molding simulation in 5 easy steps through a highly intuitive user experience, catering to beginners and experts alike allowing designers and product engineers to improve part performance while reducing defects and iterations between design and manufacturing.

Visit a h

Video Testimonials

Compare Model Attributes and Results between Variants and Document/Report Results​

This presentation is by Sagar Rajbhandari, Head of Airframe Models at Airbus.

During the virtual product development process, multiple variants of the product or its components will be created and analyzed. It is required to compare these variants in respect to the model properties and the simul

ATC Presentations

Altair Material Data Center Overview

The development of sustainable, efficient, minimum weight designs requires accurate multi domain material properties. Altair Material Data Center enables designers, engineers, and scientists to browse, search and compare materials in a standalone ...

Product Overview Videos

Introducing Altair Inspire Mold

Altair Inspire Mold provides a modern integrated approach to streamline design for manufacturing (DfM) of injection molded components.

Video Testimonials

Capturing Data in Monarch's Excel Worksheet Design

Monarch 2020 includes a new feature known as Spreadsheet Design. It can extract data from complex spreadsheets that might include multiple tabs, conditional cell formatting, and more. Monarch is the only data preparation solution that offers an ea...

Product Overview Videos

The Future of Digital End-to-End Engineering Process and Its Interoperability

Kentaro Fukuta from Elysium Co. Ltd., an APA partner, discusses the future of digital end-to-end engineering process and its interoperability.

Video Testimonials

The Future of NVH Simulations

François-Xavier Bécot from MATELYS Research Lab, an APA partner, discusses the future of NVH simulations.

Video Testimonials

The Future of a More Responsible Foundry Industry

Håkan Fransson from NovaCast Systems AB, an APA partner, discusses the future of a more responsible foundry industry.

Video Testimonials

The Future of Fatigue and Durability Analysis

Jon Aldred from HBM Prensica, an APA partner, discusses the future of fatigue and durability analysis.

Video Testimonials

The Future of Plastics Simulation

Wolfgang Korte from PART Engineering, an APA partner, discusses the future of plastics simulation.

Video Testimonials

The Future of the Design Optimization for Additive Manufacturing

Lucas Hellemans from Materialise, an APA partner, discusses the future of design optimization for additive manufacturing.

Video Testimonials

The Future of Automotive Multi-body Dynamic Simulations

Danny Nowlan from ChassisSim, an APA partner, discusses the future of automotive multi-body dynamic simulations.

Video Testimonials

The Future of Powertrain Electrification

Oliver Knaus from AVL, an APA partner, discusses the future of powertrain electrification.

Video Testimonials

The Future of Materials Information in Industry and Emerging Technologies

Neil Bauman from Key to Metals AG, an APA partner, discusses the future of materials information in industry and emerging technologies.

Video Testimonials

The Future of Fatigue Life Prediction

Klaus Hofwimmer from Magna Powertrain, an APA partner, discusses the future of fatigue life prediction.

Video Testimonials

The Future of Thermal Management

Craig Makens from ThermoAnalytics Inc., an APA partner, discusses the future of thermal management.

Video Testimonials

Safety and lightweight of Electric Vehicles: from the Lithium-ion Battery Perspective

With the increasingly stringent environment and energy sustainability, electric vehicles now become a game-changing choice for the automotive industry. By adopting recently developed high energy density, current electric vehicles have solved the “...

ATC Presentations

Future of Operational Analysis

Bruce Zulu, Director of Technical Support, Panopticon, Altair, discusses how over the past few years modern analytics and business intelligence (BI) have focused much more heavily on the full analytic workflow which includes data preparation, data...

ATC Presentations

Analytics in a No Code World

In this presentation, Mark Do Cuoto, Vice President Data Analytics at Altair, discusses the complexities of Machine Learning and AI. Academia is teaching students how to code in R and Python to build out these ML/AI solutions. Join me to hear how ...

ATC Presentations
849 Results