Resource Library

Socomec & Altair SmartWorks - Delivering Leading-Edge IoT Solutions

France-based Socomec’s specialty is providing low-voltage energy installations, from equipment to monitoring, where energy is critical – robust and ultra-reliable solutions for buildings like datacenters, solar plants, utilities, and hospitals. Us...

Video Testimonials

Chiastek Showcase Video

4-minute video introduction showcasing CosiMate as a platform for modeling and visualization, analysis and optimization in the automotive and aerospace industry.

Video Testimonials

Seam Weld Fatigue

This video shows the typical workflow to perform a seam weld fatigue analysis with HyperLife.

Videos

ICAT Meets Automotive Safety and Regulatory Requirements with Altair Simulation Software

ICAT is one of the leading centres for testing, R&D, design, development and validation in support of a Government of India funded initiative to develop facilities for automotive testing & development. To meet the challenges of the automotive ind...

Video Testimonials

Unveiling the Mysteries of the Early Universe with Modern Super Radio Telescopes

Presentation by Nicolas Fagnoni, Cavendish Laboratory, University of Cambridge.

The University of Cambridge and the Cavendish Laboratory are closely involved in the design and development of two new radio-telescopes: the ‘Square Kilometre Array’ (SKA) and the ‘Hydrogen Epoch of Reionizati

ATC Presentations, Videos

Desdemona - A Unique Flight Simulator Developed Using Simulation-Driven Design

Presentation by Robert Cresnik and Norman Eisenköck, AMST.

The Desdemona is a multi-purpose simulator covering not only helicopters, jets and civil planes but also car and ship simulation. A prototype is running in Soesterberg/Netherlands. The development of a new generation DESDEMONA req

ATC Presentations, Videos

A Motivating, Inspirational Forum for Learning: Thoughts from Attendees at the 2018 Global ATC

Thoughts from attendees express the energy and passion emanating through the exchange of knowledge, information, ideas and stories by technology leaders and industry executives at the 2018 Global Altair Technology Conference.

Video Testimonials

Design for the Future of e-Mobility

The global automotive industry is on the verge of disruption with electrification being one of the major trends. In this session we will discuss the challenges and opportunities engineers are facing in the design of the future e-Mobility, includin...

ATC Presentations, Videos

Simulation-driven Design and Manufacturing

Design for Manufacturing seminar held during 2018 Global ATC in Paris, France on October 16, 2018.

ATC Presentations, Videos

Interactive Use of Altair Compose for Calculations, Scripts, CAE Data Readers, and Post-processing

Presentation by Franck Delcroix, VP, Program Management Math at Altair.

This interactive session will highlight the following capabilities of Altair Compose: using its OpenMatrix Language (OML) for calculations, scripts, debugging, data visualization and post-processing; Working with Python

ATC Presentations, Videos

The World is Built on Engineering

Dr. Uwe Schramm and James Dagg, CTOs at Altair, keynote presentation at the 2018 Global ATC in Paris, France.

This presentation will illustrate the power of Altair’s simulation technology through several practical examples applied to some of the most common product development challenges in aut

ATC Presentations, Videos

Oracle Cloud: Altair ultraFluidX™ and Altair nanoFluidX™

Altair was founded in 1985 with a vision to use simulation to drive design and decision-making. Through the years simulation has evolved from the back end of the design process to the front — and today's cloud infrastructure opens up new possibili...

Videos

Concept Design - Get it Right From the Start

Presentation by Orlando Sadaro, Managing Director at Design 8.

If you are a designer then this presentation is right up your alley. Design seems to be an iterative process by nature. But what if we don't accept this default? What if we could get it right, from the start...? It would lead

ATC Presentations, Videos

Motorcycle Crankshaft Modeling with SimLab at BMW Motorrad

Learn about the semi-automated motorcycle crankshaft modeling process developed at BMW Motorrad based on Altair's pre- and post-processor SimLab. The scripts developed take the FE model generation time down from 2 weeks of manual work to half a day.

Customer Stories, Videos

Multiscale Designer Product Video

Multiscale Designer can help achieving more accurate and cost saving results by looking into the individual constituent of composite materials. The tool is well suited for woven, short and long chopped fiber composites and integrates with Altair's...

Videos

Design Research Experiences at ZH CoDe

Filippo Nasetti, Senior Associate at Zaha Hadid, presents at Converge 2017 in Essen, Germany.

ATC Presentations, Videos

Towards Real-time Topology Optimization

Hod Lipson, Professor of Engineering and Data Science at Columbia University, presents at Converge 2017 in Los Angeles, California.

ATC Presentations, Videos

Master Class: How to Design for Additive Manufacturing

This Master Class held at Converge 2017 in Essen Germany, presents the making of the 3iPRINT Project, which was a joint effort from csi entwicklungstechnik, APWORKS and EOS.

ATC Presentations, Videos

A Tooling Revolution for Plastic Injection Molding

Stefan de Groot, Technologist Additive Manufacturing at PROTIQ, presents at Converge 2017 in Essen, Germany

ATC Presentations, Videos

Design for the Future: 5 Trends You Need to Know

Christine Outram, Chief Product Officer at Veritas Prep, presents at Converge 2017 in Los Angeles, California.

ATC Presentations, Videos

Build a Rocket

Tim Morton, Director of Industrial Design at Newell Brands, presents at Converge 2017 in Los Angeles, California.

ATC Presentations, Videos

Development of a New Lightweight Aluminum Profile for a Glass Balustrade

The design of architectural components such as a balustrade can be challenging, since the design does not only have to look good, it also has to meet several safety requirements and standards. In addition, all designs have to be developed within t...

Videos

Webinar: Use of Santos® Technologies to Evaluate Risk of Injury from Impact Due to Flailing

This webinar will demonstrate one of many ways in which Santos® technologies provide virtual trade-off analysis capabilities for human-in-the-loop feedback that is critical in creating better designs that can be brought into production sooner whil...

Videos, Webinars

Squeak and Rattle Prevention - Why You Should Not Wait for Your First Prototype

This presentation will discuss how the industry challenges for S&R can be answered using NVH best practices and turn cost avoidance to cost reduction. Altair and ZIEGLER will discuss how to successfully integrate CPA, FE simulation and optimizatio...

ATC Presentations, Videos

Webinar: Safety Comes First - Development of the First i-Size Car Seat Using a CAE-Driven Design Process

Code Product Solutions, an engineering service provider, supports children's car seat manufacturers to develop R129 i-Size seats. Using a CAE driven design process, they developed the first i-Size car seat that fulfills all requirements while redu...

Videos, Webinars

Fieldscale SENSE Tutorial Videos

Fieldscale is pleased to bring you a free collection of tutorials to become better acquainted with the software.

Tips & Tricks, Training Materials, Tutorials, Videos

AVL Excite Acoustics Online Tutorials

AVL is pleased to bring you a free collection of tutorials to become better acquainted with the software.

eLearning, Tips & Tricks, Training Materials, Tutorials, Videos

An Interview with Ben Farmer of Robot Bike Co. Discussing the Development of their R160 Bike with Altair

Robot Bike Company (RBC) is a new startup established in the UK by aerospace engineers and mountain biking enthusiasts who identified the potential of combining additive manufacturing technologies with carbon fiber to, in their own words, “create ...

Videos

Total Materia Online Tutorials

Key to Metals brings you a free online training series to become better acquainted with the software through a series of graduated online courses.

Getting Started, Training Materials, Tutorials, Videos

Introduction to nCode DesignLife eLearning Course

This online course is a pre-requisite of technical support from HBM nCode. Submit form on site to receive eLearning materials directly from HBM nCode.

Training Materials, Videos

Dr Royston Jones Presents at the 2014 WEAF Annual Conference

Dr Royston Jones give insight into the potential use of intelligent design technologies in creating innovative design concepts for the aerospace industry.

Videos

Introduction to AcuSolve

Altair® AcuSolve® is a leading general-purpose Computational Fluid Dynamics (CFD) solver that is capable of solving the most demanding industrial and scientific applications.

Based on the Finite Element method, AcuSolve’s robust and scalable solver technology empowers users by providing unparalle

Videos

Scania Customer Story

Squeak and rattle phenomena are studied in the automotive industry in an attempt to reduce the cabin noise and as a result, give a better ride quality and comfort to occupants. In the case of Scania’s Cabin Development Department, this kind of sim...

Customer Stories, Videos

Aerodynamic Development of a Road Cycling Helmet with AcuSolve - LX Sim

LX Sim uses HyperWorks Suite and select Partner Alliance programs from Altair to help build an aerodynamic cycling helmet.

Videos

HyperWorks Helps Midea Design and Optimize Millions of AC Units

HyperWorks Helps Midea Design and Optimize Millions of AC Units. Using an air conditioner, for example, with HyperMesh, it takes Midea Design one week to mesh the whole model, setup loads and constraints, run the analysis, and extract the result.

Videos

Introduction to HyperGraph

Altair HyperGraph is a powerful data analysis and plotting tool with interfaces to many popular file formats. Its sophisticated math engine is capable of processing even the most complex mathematical expressions. HyperGraph combines these features...

Videos

Introduction to HyperView

Altair HyperView is a complete post-processing and visualization environment for finite element analysis, multi-body system simulation, digital video, and engineering data. HyperView combines advanced animation and XY plotting features with window...

Videos

DeWalt Optimizes Power Tools with HyperWorks

The development of modern electric power tools requires special attention to be simultaneously paid to both the efficiency and user comfort of the tool, as well as the robustness and durability of the devices. For the fulfillment of these two grou...

Customer Stories, Video Testimonials

Ray Nicosia Gives an Overview of Simulation in the Automotive Industry with Altair

Automotive Design Consultant, Ray Nicosia, speaks about the challenges in the automotive industry and how simulation expertise from Altair can help car makers meet their cost and performance goals.

Videos

Flux 12.3 New Features

Overview of the new features in Flux 12.3

Videos
361 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!